SIST EN IEC 61300-3-46:2025
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Examinations and measurements - Bore diameter in rectangular ferrules (IEC 61300-3-46:2025)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Examinations and measurements - Bore diameter in rectangular ferrules (IEC 61300-3-46:2025)
IEC 61300-3-46:2025 provides a standard for the measurement of guide pin bore and fibre bore diameters for rectangular ferrules used in connectors specified in the IEC 61754 series. This second edition cancels and replaces the first edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) addition of fibre bore measurement;
b) addition of force gauge method;
c) addition of Annex A on temperature dependence.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 3-46: Messung - Bohrungsdurchmesser in MT-Ferrulen (IEC 61300-3-46:2025)
Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 3-46: Examens et mesures - Diamètre de l’alésage dans les férules rectangulaire (IEC 61300-3-46:2025)
IEC 61300-3-46:2025 est de fournir une méthode normalisée en vue de mesurer les diamètres d’alésage des broches de guidage et d’alésage pour les fibres pour férules rectangulaires utilisées dans les connecteurs spécifiés dans la série IEC 61754. Cette deuxième édition annule et remplace la première édition parue en 2011. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) ajout d’un mesurage de l'alésage pour fibres;
b) ajout de la méthode du dynamomètre de traction;
c) ajout de l'Annexe A portant sur l’influence de la température.
Optični spojni elementi in pasivne komponente - Postopki osnovnega preskušanja in merjenja - 3-46. del: Preiskave in meritve - Premer izvrtine v pravokotnih tulkah (IEC 61300-3-46:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61300-3-46:2024
01-april-2024
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 3-46. del: Preiskave in meritve - Premer izvrtine v pravokotnih tulkah
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-46: Examinations and measurements - Bore diameter
in rectangular ferrules
Ta slovenski standard je istoveten z: prEN IEC 61300-3-46:2024
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61300-3-46:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 61300-3-46:2024
oSIST prEN IEC 61300-3-46:2024
86B/4846/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61300-3-46 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-02-02 2024-04-26
SUPERSEDES DOCUMENTS:
86B/4731/CD, 86B/4751A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the
final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fibre optic interconnecting devices and passive components - Basic test and measurement
procedures - Part 3-46: Examinations and Measurements - Bore diameter in rectangular ferrules
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
this electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee
positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other
purpose without permission in writing from IEC.
oSIST prEN IEC 61300-3-46:2024
IEC CDV 61300-3-46/Ed2 © IEC 2024 – 2 – 86B/4846/CDV
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 5
6 4 General description . 5
7 General . 5
8 Pin gauge assembly . 6
9 Test conditions . 6
10 Apparatus . 6
11 5 Procedure . 6
12 General . 6
13 Method A with attached weight . 7
14 Method B with force gauge . 8
15 6 Post test examination . 8
16 7 Details to be specified and reported . 8
17 (normative) Bore diameter conversion in different temperature . 9
19 Figure 1 – Pin gauge inserted into the ferrule guide pin bore or fibre bore . 7
20 Figure 2 – Examples of pin gauge assembly with attached mass element for ferrule
21 guide pin bore and fibre bore measurement (Method A) . 7
22 Figure 3 – Examples of gauge pin pulled by a force gauge for ferrule guide pin bore
23 and fibre bore measurement (Method B) . 8
25 Table 1 – Gauge pin specifications . 6
26 Table 2 – Test conditions . 6
oSIST prEN IEC 61300-3-46:2024
IEC CDV 61300-3-46/Ed2 © IEC 2024 – 3 – 86B/4846/CDV
29 INTERNATIONAL ELECTROTECHNICAL COMMISSION
30 ____________
32 FIBRE OPTIC INTERCONNECTING DEVICES
33 AND PASSIVE COMPONENTS –
34 BASIC TEST AND MEASUREMENT PROCEDURES –
36 Part 3-46: Examinations and Measurements –
37 Bore diameter in rectangular ferrules
40 FOREWORD
41 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
42 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
43 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
44 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
45 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
46 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
47 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
48 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
49 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
50 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
51 consensus of opinion on the relevant subjects since each technical committee has representation from all
52 interested IEC National Committees.
53 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
54 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
55 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
56 misinterpretation by any end user.
57 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
58 transparently to the maximum extent possible in their national and regional publications. Any divergence between
59 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
60 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
61 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
62 services carried out by independent certification bodies.
63 6) All users should ensure that they have the latest edition of this publication.
64 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
65 members of its technical committees and IEC National Committees for any personal injury, property damage or
66 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
67 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
68 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
69 indispensable for the correct application of this publication.
70 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
71 rights. IEC shall not be held responsible for identifying any or all such patent rights.
72 International Standard IEC 61300-3-46 has been prepared by subcommittee SC86B: Fibre optic
73 interconnecting devices and passive components, of IEC technical committee TC86: Fibre
74 optics.
75 This second edition cancels and replaces the first edition published in 2011. This edition
76 constitutes a technical revision.
77 This edition includes the following significant technical changes with respect to the previous
78 edition:
79 a) addition of fibre bore measurement;
80 b) addition of force gauge method;
81 c) addition of Annex on temperat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.