SIST EN ISO 5456-1:2002

Technical drawings - Projection methods - Part 1: Synopsis (ISO 5456-1:1996)

Technische Zeichnungen - Projektionsmethoden - Teil 1: Übersicht (ISO 5456-1:1996)

Dieser Teil von ISO 5456 enthält eine Übersicht über die unterschiedlichen Projektionsmethoden sowie deren geometrischen Verhältnisse. Die Teile 2 bis 4 legen Einzelheiten für die Auswahl und Anwendung unterschiedlicher Projektionsmethoden fest.

Dessins techniques - Méthodes de projection - Partie 1: Récapitulatif (ISO 5456-1:1996)

La présente partie de l'ISO 5456 donne un récapitulatif des divers types de méthodes de projection ainsi que leurs relations géométriques. Les détails pour la sélection et l'application des diverses méthodes de projection sont donnés dans l'ISO 5456-2, l'ISO 5456-3 et l'ISO 5456-4.

Tehnične risbe - Metode projekcije - 1. del: Povzetek (ISO 5456-1:1996)

General Information

• Status: Published
• Publication Date: 31-Jan-2002
• ICS: 01.100.01 - Technical drawings in general
• Technical Committee: TRS - Technical drawings, quantities, units, symbols and graphical symbols
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Feb-2002
• Due Date: 01-Feb-2002
• Completion Date: 01-Feb-2002
• Ref Project: EN ISO 5456-1:1999 - Technical drawings - Projection methods - Part 1: Synopsis (ISO 5456-1:1996)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5456-1:2002
01-februar-2002
7HKQLþQHULVEH0HWRGHSURMHNFLMHGHO3RY]HWHN,62
Technical drawings - Projection methods - Part 1: Synopsis (ISO 5456-1:1996)
Technische Zeichnungen - Projektionsmethoden - Teil 1: Übersicht (ISO 5456-1:1996)
Dessins techniques - Méthodes de projection - Partie 1: Récapitulatif (ISO 5456-1:1996)
Ta slovenski standard je istoveten z: EN ISO 5456-1:1999
ICS:
01.100.01 7HKQLþQRULVDQMHQDVSORãQR Technical drawings in
general
SIST EN ISO 5456-1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 5456-1:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 5456-1:2002

---------------------- Page: 3 ----------------------

SIST EN ISO 5456-1:2002

---------------------- Page: 4 ----------------------

SIST EN ISO 5456-1:2002

---------------------- Page: 5 ----------------------

SIST EN ISO 5456-1:2002

---------------------- Page: 6 ----------------------

SIST EN ISO 5456-1:2002
INTERNATIONAL IS0
5456-l
STANDARD
First edition
1996-06-15
Technical drawings - Projection methods -
Part 1:
Synopsis
- M&hodes de projection -
Dessins techniques
Par-tie 7: Rkapitula tif
Reference number
IS0 5456-1:1996(E)
-

---------------------- Page: 7 ----------------------

SIST EN ISO 5456-1:2002
IS0 5456=1:1996(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work of
preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be rep-
resented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 5456-l was prepared by Technical Committee
ISOfTC 10, Technical drawings, product definition and related documen-
tation, Subcommittee SC 1, Basic conventions.
IS0 5456 consists of the following parts, under the general title Technical
drawings - Projection methods:
- Part 7 : Synopsis
- Part 2: Orthographic representations
Part 3: Axonome tric representations
Part 4: Central projection
Annex A of this part of IS0 5456 is for information only.
0 IS0 1996
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 5456-1:2002
IS0 5456=1:1996(E)
@ IS0
Introduction
In the broad field of technical activities, various projection methods are
used to represent objects. All these methods have their own merits, but
also their inherent disadvantages.
The normal technical drawing is often an orthogonal projection, in which
related representations of more than one view are utilized (see IS0 5456-Z)
to draw and completely define any object by means of carefully chosen
views, cuts and sections.
However, the execution of such two-dimensional representations requires
an understanding of both the projection method and its interpretation, so
that the observer will be able to synthesize the single views into a three-
dimensional object.
For many technical fields and their stages of development, however, it is
necessary to provide an easily understood picture to observers. Such
drawings, called pictorial representation, provide a three-dimensional view
of an object as it would appear to the observer. No special technical train-
ing for reading pictorial representations is necessary.
Pictorial representations ma presented on their own or may sup-
Y be
plement orthogonal drawings
exist, but their nomenclatures
Variou s methods of pictorial representations
differ, and may be used even contradictorily.
The steady increase in global technical intercommunication, as well as the
evolution of methods of computer-aided design and draughting with their
various types of three-dimensional representations, suggest the need for
ISOnC 10 to clarify this problem.
The rules and conventions given in IS0 5456 should be used, in accord-
ance with IS0 128, for all types of technical drawings and in all fields of
technical activities, such as:
- mechanical and construction drawings;
- manuals and instruction books;
- X-ray views;
- exploded views.

---------------------- Page: 9 ----------------------

SIST EN ISO 5456-1:2002
This page intentionally left blank

---------------------- Page: 10 ----------------------

SIST EN ISO 5456-1:2002
IS0 5456=1:1996(E)
INTERNATIONAL STANDARD @ IS0
Projection methods -
Technical drawings -
Part 1:
Synopsis
3 Definitions
1 Scope
This part of IS0 5456 gives a survey of the various
For the purposes of this part of IS0 5456, the defi-
types of projection methods as well as their geo-
nitions given in IS0 10209-I
...