01.100.01 - Technical drawings in general
ICS 01.100.01 Details
Technical drawings in general
Technisches Zeichnen im allgemeinen
Dessins techniques en général
Tehnično risanje na splošno
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 01.100.01 - Technical drawings in general
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies the preparation and reproduction of design parts lists.
This document defines the basic principles and structure of design parts lists.
This document is applicable to all design parts lists for railway applications.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a framework for building systems for the classification of requirements. Such systems can be used to indicate requirements of special importance, and communicate them for production set-up, verification, audit, etc.
This document:
— gives background information why such systems are useful in many areas of manufacturing;
— can be referred to for the concept of classification of requirements;
— functions as a framework for applying such systems in technical product documentation (TPD);
— indicates the needed elements for a classification system;
— supports with aspects in the choice of symbols for a classification system.
As a framework, this document does not give the details of a specific classification system. Instead, it functions as a basis for an organization-specific system which contains details such as notations and symbols, classification levels, assessment procedures, etc., including usage and interpretation in the TPD.
This document does not specify the contractual consequences of a classification (e.g. needed actions such as choice of tools, reliability index or process capability for a classification level) nor other references to standards or documents for handling classifications and nonconformity to requirements.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the classification of requirements based on severity and susceptibility. The classification method requires a system in line with the framework described in ISO 24096-1 to form a complete system.
This document:
— gives guidance on the needed elements for a consistent evaluation of the severity over time, and supports a company business model and its brand image;
— gives background to why additional parameters alongside severity are useful as a base for classification;
— adds susceptibility as a viable parameter along with severity;
— gives guidance on the methodology for classification requirements using severity and susceptibility.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the classification of requirements based on severity and susceptibility. The classification method requires a system in line with the framework described in ISO 24096-1 to form a complete system.
This document:
— gives guidance on the needed elements for a consistent evaluation of the severity over time, and supports a company business model and its brand image;
— gives background to why additional parameters alongside severity are useful as a base for classification;
— adds susceptibility as a viable parameter along with severity;
— gives guidance on the methodology for classification requirements using severity and susceptibility.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a framework for building systems for the classification of requirements. Such systems can be used to indicate requirements of special importance, and communicate them for production set-up, verification, audit, etc.
This document:
— gives background information why such systems are useful in many areas of manufacturing;
— can be referred to for the concept of classification of requirements;
— functions as a framework for applying such systems in technical product documentation (TPD);
— indicates the needed elements for a classification system;
— supports with aspects in the choice of symbols for a classification system.
As a framework, this document does not give the details of a specific classification system. Instead, it functions as a basis for an organization-specific system which contains details such as notations and symbols, classification levels, assessment procedures, etc., including usage and interpretation in the TPD.
This document does not specify the contractual consequences of a classification (e.g. needed actions such as choice of tools, reliability index or process capability for a classification level) nor other references to standards or documents for handling classifications and nonconformity to requirements.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the classification of requirements based on severity and susceptibility. The classification method requires a system in line with the framework described in ISO 24096-1 to form a complete system. This document: — gives guidance on the needed elements for a consistent evaluation of the severity over time, and supports a company business model and its brand image; — gives background to why additional parameters alongside severity are useful as a base for classification; — adds susceptibility as a viable parameter along with severity; — gives guidance on the methodology for classification requirements using severity and susceptibility.
- Standard23 pagesEnglish languagesale 15% off
- Standard23 pagesFrench languagesale 15% off
This document specifies a framework for building systems for the classification of requirements. Such systems can be used to indicate requirements of special importance, and communicate them for production set-up, verification, audit, etc. This document: — gives background information why such systems are useful in many areas of manufacturing; — can be referred to for the concept of classification of requirements; — functions as a framework for applying such systems in technical product documentation (TPD); — indicates the needed elements for a classification system; — supports with aspects in the choice of symbols for a classification system. As a framework, this document does not give the details of a specific classification system. Instead, it functions as a basis for an organization-specific system which contains details such as notations and symbols, classification levels, assessment procedures, etc., including usage and interpretation in the TPD. This document does not specify the contractual consequences of a classification (e.g. needed actions such as choice of tools, reliability index or process capability for a classification level) nor other references to standards or documents for handling classifications and nonconformity to requirements.
- Standard12 pagesEnglish languagesale 15% off
- Standard12 pagesFrench languagesale 15% off
This document specifies the preparation and reproduction of design parts lists.
This document defines the basic principles and structure of design parts lists.
This document is applicable to all design parts lists for railway applications.
- Standard26 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the basis of revising technical design documents.
This document is applicable to all technical design documents for railway applications, irrespective of the material form like transparency originals, plotter drawings, aperture cards, computer readable data media, photoprints etc.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the preparation, administration, and reproduction of technical documents.
It complies with the requirements of EN, ISO or IEC Standards for technical documents.
This document is applicable to all to technical documents for railway applications, irrespective of technology i.e., mechanical, pneumatic, hydraulic, electric, electronic etc.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the preparation, administration, and reproduction of technical documents.
It complies with the requirements of EN, ISO or IEC Standards for technical documents.
This document is applicable to all to technical documents for railway applications, irrespective of technology i.e., mechanical, pneumatic, hydraulic, electric, electronic etc.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the basis of revising technical design documents.
This document is applicable to all technical design documents for railway applications, irrespective of the material form like transparency originals, plotter drawings, aperture cards, computer readable data media, photoprints etc.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the data exchange of technical documents such as bill of material, technical drawings and other related technical documents for rolling stock.
- Standard87 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the data exchange of technical documents such as bill of material, technical drawings and other related technical documents for rolling stock.
- Standard87 pagesEnglish languagesale 10% offe-Library read for1 day
This document establishes the types of lines used in technical drawings (e.g. diagrams, plans or maps), their designations and their configurations, as well as general rules for the draughting of lines. In addition, this document specifies general rules for the representation of leader and reference lines and their components as well as for the arrangement of instructions on or at leader lines in technical documents. Annexes have been provided for specific information on mechanical, construction and shipbuilding technical drawings.
For the purposes of this document the term “technical drawing” is interpreted in the broadest possible sense, encompassing the total package of documentation specifying the product (workpiece, subassembly, assembly).
- Standard76 pagesEnglish languagesale 10% offe-Library read for1 day
This document establishes the types of lines used in technical drawings (e.g. diagrams, plans or maps), their designations and their configurations, as well as general rules for the draughting of lines. In addition, this document specifies general rules for the representation of leader and reference lines and their components as well as for the arrangement of instructions on or at leader lines in technical documents. Annexes have been provided for specific information on mechanical, construction and shipbuilding technical drawings. For the purposes of this document the term “technical drawing” is interpreted in the broadest possible sense, encompassing the total package of documentation specifying the product (workpiece, subassembly, assembly).
- Standard68 pagesEnglish languagesale 15% off
- Standard70 pagesFrench languagesale 15% off
This document specifies the general principles for presenting views, sections and cuts applicable to various kinds of technical drawings (e.g. mechanical, electrical, architectural, civil engineering), following the orthographic projection methods specified in ISO 5456-2. Views and sections for shipbuilding technical drawings are discussed in ISO 128-15. Views and sections for 3D models are discussed in ISO 16792.
Attention has also been given in this document to the requirements of reproduction, including microcopying in accordance with ISO 6428.
- Standard56 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the general principles for presenting views, sections and cuts applicable to various kinds of technical drawings (e.g. mechanical, electrical, architectural, civil engineering), following the orthographic projection methods specified in ISO 5456-2. Views and sections for shipbuilding technical drawings are discussed in ISO 128-15. Views and sections for 3D models are discussed in ISO 16792. Attention has also been given in this document to the requirements of reproduction, including microcopying in accordance with ISO 6428.
- Standard48 pagesEnglish languagesale 15% off
- Standard49 pagesFrench languagesale 15% off
This document specifies the recommended proportions for the symbols used in technical product documentation. It gives recommended dimensions based on the grid related to the line width to be used.
This document does not apply to symbols used in process plant documentation, which are covered in ISO 81714-1.
The proportions of the symbols are based on the standard heights of lettering given in ISO 3098-1.
- Standard109 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the recommended proportions for the symbols used in technical product documentation. It gives recommended dimensions based on the grid related to the line width to be used.
This document does not apply to symbols used in process plant documentation, which are covered in ISO 81714-1.
The proportions of the symbols are based on the standard heights of lettering given in ISO 3098-1.
- Standard109 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
This document presents an index of the terms used in the ISO 128 series in English, French, German, Chinese, Russian and Japanese.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document gives general rules for the execution of technical drawings (2D and 3D), as well as presenting the structure of the other parts of the ISO 128 series. This document is applicable to technical drawing in the fields of mechanical engineering, construction, architecture and shipbuilding. It is applicable to both manual and computer-based technical drawings.
For the purpose of this document the term "technical drawing" shall be interpreted in the broadest possible sense, encompassing the total package of documentation specifying the product (workpiece, subassembly, assembly).
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document presents an index of the terms used in the ISO 128 series in English, French, German, Chinese, Russian and Japanese.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
This document gives general rules for the execution of technical drawings (2D and 3D), as well as presenting the structure of the other parts of the ISO 128 series. This document is applicable to technical drawing in the fields of mechanical engineering, construction, architecture and shipbuilding. It is applicable to both manual and computer-based technical drawings. For the purpose of this document the term "technical drawing" shall be interpreted in the broadest possible sense, encompassing the total package of documentation specifying the product (workpiece, subassembly, assembly).
- Standard6 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
ISO 129-1:2018 establishes the general principles for presentation of dimensions and associated tolerances that apply to 2D technical drawings in all disciplines and trades but which can also be applied to 3D applications.
ISO 129-1:2018 does not cover the application of dimensional tolerances and their meaning. See ISO 14405‑1 for tolerancing principles. This document can only be used to describe the nominal model of a drawing, not the non-ideal surface model (skin model) used for tolerancing purposes (for more information on tolerancing specifications, see the list of GPS standards listed as normative reference or as bibliography)
Considering the ISO 14405 series, the presentation of tolerance indication is unambiguous when it is applied to a dimension which is a size and ambiguous when the dimension is not a size.
All rules presented in this document are available for any type of drawing (see ISO 29845).
In addition, this document introduces the concept of property indicators, developed length, between, surface indicators, flag notes and textual instructions.
NOTE 1 All figures are shown in 2D views only.
NOTE 2 Additional information and details for construction engineering are given in ISO 6284.
- Standard77 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 13715:2017 specifies rules for the indication and dimensioning of undefined edges in technical product and dimensions. The proportions and dimensions of the graphical symbols to be used are also specified.
In cases where the geometrically defined shape of an edge (for example, 1 × 45°) is required, the general dimensioning principles given in ISO 129‑1 apply.
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 18388:2016 specifies a series of relief grooves for shafts and holes, intended for general use in mechanical engineering.
It also intends to avoid unnecessary multiplicity of tools by a restricted selection of groove-types and dimensional versions.
NOTE The shape and the dimensions of the relief grooves type G and H correspond with the "Indexable hard material inserts" according to ISO 6987.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
This document lays down rules for the representation of modular sizes, lines and grids on construction drawings. The basic module M is 100 mm (see ISO 1006).
Generally, modular sizes are for use on design drawings, but can also be added to production drawings for manufacturing, orientation and location.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
This document establishes complementary rules to ISO 1101 to be applied to pattern specifications and defines rules to combine individual specifications, for geometrical specifications e.g. using the symbols POSITION, SYMMETRY, LINE PROFILE and SURFACE PROFILE, as well as STRAIGHTNESS (in the case where the toleranced features are nominally coaxial) and FLATNESS (in the case where the toleranced features are nominally coplanar) as listed in Annex C.
These rules apply when a set of tolerance zones are grouped together with location or orientation constraints, through the use of the CZ, CZR or SIM modifiers.
This document does not cover the use of the pattern specifications when the least and maximum material requirement is applied (see ISO 2692).
This document does not cover the establishment of common datum (see ISO 5459) based on pattern features.
- Standard52 pagesEnglish languagesale 10% offe-Library read for1 day
This document establishes complementary rules to ISO 1101 to be applied to pattern specifications and defines rules to combine individual specifications, for geometrical specifications e.g. using the symbols POSITION, SYMMETRY, LINE PROFILE and SURFACE PROFILE, as well as STRAIGHTNESS (in the case where the toleranced features are nominally coaxial) and FLATNESS (in the case where the toleranced features are nominally coplanar) as listed in Annex C.
These rules apply when a set of tolerance zones are grouped together with location or orientation constraints, through the use of the CZ, CZR or SIM modifiers.
This document does not cover the use of the pattern specifications when the least and maximum material requirement is applied (see ISO 2692).
This document does not cover the establishment of common datum (see ISO 5459) based on pattern features.
- Standard52 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides a list of all ISO geometrical product specification (GPS) and technical product documentation (TPD) standards for technical product specifications (TPS) in the mechanical engineering field. The document operates as an index to the many ISO standards applicable to a TPS by means of cross-reference, and, where appropriate, the subject references are supplemented by commentary and recommendations considered to be of significance but which are not otherwise covered.
- Technical report27 pagesEnglish languagesale 15% off
ISO 129-5:2018 specifies the dimensioning of drawings for general use on structural metal work mainly consisting of plates, bars and profile sections.
- Standard17 pagesEnglish languagesale 15% off
ISO 129-1:2018 establishes the general principles for presentation of dimensions and associated tolerances that apply to 2D technical drawings in all disciplines and trades but which can also be applied to 3D applications. ISO 129-1:2018 does not cover the application of dimensional tolerances and their meaning. See ISO 14405‑1 for tolerancing principles. This document can only be used to describe the nominal model of a drawing, not the non-ideal surface model (skin model) used for tolerancing purposes (for more information on tolerancing specifications, see the list of GPS standards listed as normative reference or as bibliography) Considering the ISO 14405 series, the presentation of tolerance indication is unambiguous when it is applied to a dimension which is a size and ambiguous when the dimension is not a size. All rules presented in this document are available for any type of drawing (see ISO 29845). In addition, this document introduces the concept of property indicators, developed length, between, surface indicators, flag notes and textual instructions. NOTE 1 All figures are shown in 2D views only. NOTE 2 Additional information and details for construction engineering are given in ISO 6284.
- Standard68 pagesEnglish languagesale 15% off
- Standard69 pagesFrench languagesale 15% off
ISO 1660:2017 gives the rules for geometrical specifications of integral and derived features, using the line profile and surface profile characteristic symbols as defined in ISO 1101.
- Standard55 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 1660:2017 gives the rules for geometrical specifications of integral and derived features, using the line profile and surface profile characteristic symbols as defined in ISO 1101.
- Standard55 pagesEnglish languagesale 10% offe-Library read for1 day
ISO 3098-1:2015 specifies the general requirements for lettering, in accordance with the other parts of ISO 3098, to be used in technical product documentation (in particular on technical drawings). It includes basic conventions as well as rules for the application of lettering using the following techniques: free-hand lettering (by means of an underlaid "grid"); templates and manual lettering instruments; dry transfer systems; numerically controlled lettering and draughting systems.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
Discusses the concepts used in 61346-1 with a life cycle story of an 'object' as a basis.
- Standard9 pagesEnglish and French languagesale 15% off
ISO 3098-1:2015 specifies the general requirements for lettering, in accordance with the other parts of ISO 3098, to be used in technical product documentation (in particular on technical drawings). It includes basic conventions as well as rules for the application of lettering using the following techniques: free-hand lettering (by means of an underlaid "grid"); templates and manual lettering instruments; dry transfer systems; numerically controlled lettering and draughting systems.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
ISO 129-4:2013 specifies the dimensioning for general use on metal hulls on shipbuilding drawings.
- Standard8 pagesEnglish languagesale 15% off
This International Standard gives rules for the presentation of part references in assembly representations,
e.g. on assembly drawings, in order to identify the constituent parts in a related parts list.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This International Standard gives rules for the presentation of part references in assembly representations,
e.g. on assembly drawings, in order to identify the constituent parts in a related parts list.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
- Amendment7 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard1 pageEnglish languagesale 15% off
- Standard1 pageFrench languagesale 15% off
ISO 3272-1:2003 specifies reduction ratios, enlargement ratios, sizes of enlargement and the resulting image sizes for recording on 35 mm unperforated microfilm technical drawings and other drawing office documents, such as architects' plans, calculation notes, specifications, vocabularies and parts lists. ISO 3272-1:2003 applies to the microfilming of documents no larger than A0 with dark lines and characters on a light background, preferably prepared in accordance with ISO 5457 and ISO 6428. It may also apply to sizes other than those specified in ISO 5457, provided they are no larger than 912 mm x 1 230 mm and can be accommodated within a single frame of 35 mm microfilm, as specified in ISO 3272-1:2003. ISO 3272-1:2003 does not apply to images created by a COM device.
- Standard7 pagesEnglish languagesale 15% off
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard36 pagesEnglish languagesale 10% offe-Library read for1 day