SIST EN ISO 8205-2:1999

Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:1993)

Migrated from Progress Sheet (TC Comment) (2000-07-10): UAP

Wassergekühlte Sekundäranschlußkabel für das Widerstandsschweißen - Teil 2: Abmessungen und Anforderungen für Einleiter-Anschlußkabel (ISO 8205-2:1993)

Dieser Teil von ISO 8205 legt die Maße für Einleiter-Anschlußkabel fest, wie sie in der Widerstandsschweißtechnik und verwandten Verfahren benutzt werden. Er enthält die Anforderungen für die elektrischen und mechanischen Eigenschaften und die Kühlung, sowie die Bedingungen für den Einsatz dieser Kabel. Anhang A gibt zusätzliche Informationen, wenn vorgesehen ist, die Kabel farbig zu kennzeichnen.

Câbles secondaires refroidis par eau, pour le soudage par résistance - Partie 2: Dimensions et prescriptions pour câbles a un conducteur (ISO 8205-2:1993)

Vodno hlajeni sekundarni priključni kabli za elektrouporovno varjenje – 2. del: Preskusni pogoji (ISO 8205-2:1993)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1999
• Withdrawal Date: 30-Apr-2003
• ICS: 25.160.30 - Welding equipment
• Technical Committee: VAR - Welding
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-May-2003
• Due Date: 01-May-2003
• Completion Date: 01-May-2003
• Ref Project: EN ISO 8205-2:1996 - Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:1993)

Relations

• Replaced By: SIST EN ISO 8205-2:2003 - Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002)
• Effective Date: 01-May-2003

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8205-2:1999
01-december-1999
9RGQRKODMHQLVHNXQGDUQLSULNOMXþQLNDEOL]DHOHNWURXSRURYQRYDUMHQMH±GHO
3UHVNXVQLSRJRML,62
Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions
and requirements for single-conductor connection cables (ISO 8205-2:1993)
Wassergekühlte Sekundäranschlußkabel für das Widerstandsschweißen - Teil 2:
Abmessungen und Anforderungen für Einleiter-Anschlußkabel (ISO 8205-2:1993)
Câbles secondaires refroidis par eau, pour le soudage par résistance - Partie 2:
Dimensions et prescriptions pour câbles a un conducteur (ISO 8205-2:1993)
Ta slovenski standard je istoveten z: EN ISO 8205-2:1996
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 8205-2:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8205-2:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 8205-2:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 8205-2:1999

---------------------- Page: 4 ----------------------

SIST EN ISO 8205-2:1999

---------------------- Page: 5 ----------------------

SIST EN ISO 8205-2:1999

---------------------- Page: 6 ----------------------

SIST EN ISO 8205-2:1999
INTERNATIONAL
ISO
STANDARD
8205-2
First edition
19934 2-15
Water-cooled secondary connection cables
for resistance welding -
Part 2:
Dimensions and requirernents for
Single-conductor connection cables
Cables secondaires refroidis par eau pour le soudage par hsistance -
Partie 2: Dimensions et prescriptions pour cables 3 un conducteur
Reference number
ISO 8205-2: 1993iE)

---------------------- Page: 7 ----------------------

SIST EN ISO 8205-2:1999
ISO 8205=2:1993(E)
Foreword
ISO (the lnternational Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take patt in the work. ISO
collaborates closely with the International Electrotechnical Commission
(1 EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 8205-2 was prepared by Technical Committee
lSO/TC 44, Welding and allied processes, Subcommittee SC 6, ßesist-
ante welding.
ISO 8205 consists of the following Parts, under thecgeneral title Water-
cooSed secondary connection cables for resistance welding:
- Part 1: Dimensions and requirements for doerb/e-conductor con-
nection cables
- Part 2: Dimensions and requirements for Single-conductor con-
nection cables
- Part 3: Test requirements
Annex A of this part of ISO 8205 is for Information only.
0 ISO 1993
All rights reserved. Unless otherwise specified, no part 0% this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher,
International Organkation for Standardization
Case Postale 56 0 CH-1 211 Geneve 20 0 Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 8205-2:1999
INTERNATIONAL STANDARD 0 ISO ISO; 8205=2:1993(E)
Water-cooled secondary connection cables for
resistance welding -
Part 2:
Dimensions and requirements for Single-conductor
connection cables
and requiremen ts for double-conductor connection
1 Scope
cables.
This part of ISO 8205 specifies the dimensions of
ISO 8205-3: 1993, Water-cooled secondary connection
Single-conductor connection cables used for resist-
cables for resistance welding - Part 3: Test require-
ante welding and allied processes. lt stipulates the
men ts.
requirements regarding the electrical, mechanical and
cooling characteristics of these cables and their con-
ditions of use.
3 Definition
Annex A gives additional information when colour
For the purposes of this patt of ISO 8205, the follow-
coding of the cables is intended.
ing definition appl ies.
3.1 Single-conductor connection cable: Cable
comprising one conductor providing an electrical link
between the secondary terminals of a welding trans-
former and the welding set (manual or robotized
guns).
2 Normative references
The following Standards contain provisions which,
4 Classification
through reference in this text, constitute provisions
of this part of ISO 8205. At the time of publication, the
Single-conductor water-cooled connection cables are
editions indicated were valid. All Standards are subject
classified into two types, C and D, according to the
to revision, and Parties to agreements based on this
form of the end lugs (see figure 1 and table 1).
patt of ISO 8205 are encouraged to investigate the
possibility of applying the most recent editions of the
Standards indicated below. Members of IEC and ISO
5 Dimensions
maintain registers of currently valid International
Standards.
5.1 Cross-sectional area
ISO 128: 1982, Technical drawings - General prin-
ciples 0 f pesen ta tion.
The effective Cross-sectional area of topper shall be
one of the following:
ISO 8205-1: 1993, Water-coo/ed secondary connection
160 mm* - 200 mm2
cables for resistance welding - Part 1: Dimensions - 250 mm2 - 315 mm2
1

---------------------- Page: 9 ----------------------
...