SIST EN ISO 11806:1998/AC:1999
(Amendment)Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997)
Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997)
(TC - incomplete text of Corrigendum?)
Land- und Forstmaschinen - Tragbare handgeführte Freischneider und Trimmer mit Antrieb durch Verbrennungsmotor - Sicherheit (ISO 11806:1997)
Matériel agricole et forestier - Débroussailleuses et coupe-herbe portatifs a moteur thermique - Sécurité (ISO 11806:1997)
Kmetijski in gozdarski stroji - Prenosne motorne žage za nego in motorne kose – Varnost (ISO 11806:1997)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11806:1998/AC:1999
01-december-1999
Kmetijski in gozdarski stroji - Prenosne motorne žage za nego in motorne kose –
Varnost (ISO 11806:1997)
Agricultural and forestry machinery - Portable hand-held combustion engine driven brush
cutters and grass trimmers - Safety (ISO 11806:1997)
Land- und Forstmaschinen - Tragbare handgeführte Freischneider und Trimmer mit
Antrieb durch Verbrennungsmotor - Sicherheit (ISO 11806:1997)
Matériel agricole e
...
This May Also Interest You
This document specifies basic test and condition requirements for deflection pulleys and sling gear which are attached to ropes and rope end connectors in forestal applications.
It is applicable to forestal hauling operations including rope-assisted felling.
This document is applicable to the following elements, sling gear and fastening elements:
- deflection pulleys used in forestal hauling operation (see 3.22);
- choker ropes;
- choker chains;
- radio controlled chokers;
- shackles;
- round slings/tree protectors;
- tree towing ropes;
- rope slide hooks/rope sliders/choker hooks.
It is not applicable to the following sling gear:
- the functional safety of radio controlled chokers;
- non-sheathed tree towing ropes made of synthetic fibres;
- slings and deflection pulleys for the function and structure of mobile yarders as defined in EN 16517 (e.g. for the installation of the haul-back line).
- Standard21 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft20 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies safety requirements and measures for verification for the design, construction,
transporting and commissioning of portable, combustion-engine, hand-held chain-saws. The chainsaws are intended to be used for forest work by only one operator, with the right hand on the rear
handle and left hand on the front handle.
Dismantling and scrapping of the product is not covered by this document. Methods for the elimination
or reduction of hazards arising from the use of these machines and the type of information on safe
working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events, with
the exception of kickback and balance for machines with an engine displacement of more than 80 cm3,
relevant to these machines when they are used as intended and under conditions of misuse which are
reasonably foreseeable by the manufacturer (see Annex A).
This document is applicable to chain-saws manufactured after its date of publication
- Standard36 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft33 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies safety requirements and measures for verification for the design, construction,
transporting and commissioning for tree service of portable, combustion-engine, hand-held chain-saws
having a maximum mass of 4,3 kg (without the guide bar and saw-chain and with tanks empty).
The chain-saws are intended to be used, with the right hand on the rear handle and left hand on the
front handle, by a trained operator.
Dismantling and scrapping of the product is not covered by this document. Methods for the elimination
or reduction of hazards arising from the use of these machines and the type of information on safe
working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events relevant
to these machines when they are used as intended and under conditions of misuse which are reasonably
foreseeable by the manufacturer (see Annex B).
This document is applicable to chain-saws manufactured after its date of publication.
NOTE Figure 1 shows an example of a chain-saw within the scope of this document.
- Standard41 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft38 pagesEnglish languagesale 10% offe-Library read for×1 day
- Amendment24 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft5 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for×1 day
- 05-May-2021
- 08-Jun-2022
- 65.060.80
- 2006/42/EC
- M/396
- IMKG
This document gives safety requirements and measures for their verification for the design and
construction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called
machines) having an integral combustion engine as their power unit and mechanical power transmission
between the power source and the cutting attachment. Methods for the elimination or reduction of
hazards arising from the use of these machines and the type of information on safe working practices
to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events relevant
to these machines, as well as when they are used as intended and under conditions of misuse which are
reasonably foreseeable by the manufacturer.
This document is not applicable to machines equipped with metallic cutting attachments consisting of
more than one piece, such as pivoting chains or flail blades.
NOTE See Annex C for a list of significant hazards.
This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers
manufactured after its date of publication.
- Standard46 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft48 pagesEnglish languagesale 10% offe-Library read for×1 day
- 09-Sep-2020
- 10-Apr-2022
- 65.060.80
- 2006/42/EC
- M/396
- IMKG
This International Standard defines dimensions and specifies performance and safety requirements for traction assistance/tethering winches used in forestry for assisting supported machines while going uphill and downhill (pulling and braking). It is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in ISO 6814 such as harvesters, forwarders, skidders, planting machines, machines for forest ground preparation and machines for extracting residual waste. These machines can be equipped with wheels and/or tracks. It is applicable to autonomous traction assistance winch systems which are installed on a position away from the supported machine too. It is not applicable to traction assistance winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope, logging systems or yarding. The safe use of traction assistance systems covered by this standard requires the supported machines to be able to remain at least stationary on any position of the slope they are driving on without using rope support.
- Standard53 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft33 pagesEnglish languagesale 10% offe-Library read for×1 day
- 26-Apr-2020
- 03-Apr-2022
- 65.060.80
- 2006/42/EC
- M/396
- IMKG
This document specifies safety requirements, and measures for their verification, for the design and
construction of portable, hand-held, powered brush-cutters and grass-trimmers with a backpackmounted combustion engine power source and mechanical power transmission between the power
source and the cutting attachment (hereafter referred to as “machine”). Methods for the elimination
or reduction of hazards arising from the use of these machines and the type of information on safe
working practices to be provided by the manufacturer are specified.
This document, taken together with the relevant clauses of ISO 11806-1:2021 (see 4.1), deals with all
significant hazards, hazardous situations and hazardous events, with the exception of whole-body
vibration from the backpack power unit, relevant to these machines when they are used as intended
and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is
not available at the time of publication.
NOTE 2 See Annex A, together with ISO 11806-1:2021, Annex A, for a list of significant hazards.
This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers
manufactured after its date of publication.
This document is not applicable to machines equipped with metallic cutting attachments consisting of
more than one piece, such as pivoting chains or flail blades
- Standard21 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard21 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft18 pagesEnglish languagesale 10% offe-Library read for×1 day
- 09-Sep-2020
- 24-Mar-2022
- 65.060.80
- 2006/42/EC
- M/396
- IMKG
This European Standard gives safety requirements, and the means of verification, for the design and construction of mobile yarders for logging of forest products and their mounting. It counts for all logging operations with cable yarders both in sloped and flat terrain. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
It deals with the significant hazards (as listed in Table 1), hazardous situations and events relevant to mobile yarders used as intended and under the conditions foreseen by the manufacturer (see Clauses 4 and 5).
It is not applicable to:
- rope splicing,
- ancillary loaders or cable cranes,
- cableways for material transport (other than wood), and
- skidder winches (skidding).
The specifications of cabin in this context are only relevant for the yarder or a yarder-loader combination. The cabin and the chassis of the vehicle (prime mover), to which the yarder is mounted are not part of this document.
The Document deals with all the significant hazards (as listed in Table 1), hazardous situations and events relevant to mobile yarders when they are used as intended and under the conditions of misuse reasonably foreseeable by the manufacturer (see Clauses 4 and 5). This document is not applicable to mobile yarders manufactured before the date of its publication.
- Standard35 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft33 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies a vibration test code for determining, efficiently and under standardized
conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustionengine-powered forest and garden machinery, including chain-saws, brush-cutters, grass-trimmers,
edgers, pole-mounted powered pruners, hedge-trimmers and garden-blowers.
Although the magnitudes measured are obtained in an artificial operation, they nevertheless give an
indication of the values to be found in a real work situation.
Vibration test codes, as described in this document, enable the manufacturer to verify the effort
regarding low vibration design.
- Standard39 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft37 pagesEnglish languagesale 10% offe-Library read for×1 day
This document specifies safety requirements and measures for their verification for the design and
construction of portable, hand-held, pole-mounted powered pruners with a backpack power unit
(hereafter referred to as “machine”). These machines use a power transmission shaft to transmit power
to a cutting attachment consisting of a combination of saw-chain and guide bar, a reciprocating saw
blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the
elimination or reduction of hazards arising from the use of these machines and the type of information
on safe working practices to be provided by the manufacturer are specified.
This document, together with the relevant sections of ISO 11680-1:2021, deals with all significant
hazards, hazardous situations or hazardous events, with the exception of electric shock from contact
with overhead electric lines (apart from warnings and advices for inclusion in the instructions) and
whole-body vibration from the backpack power unit, relevant to these machines when they are used as
intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is
not available at the date of publication.
NOTE 2 See Annex A for a list of significant hazards.
This document is applicable to portable, hand-held, pole-mounted powered pruners with backpack
power unit manufactured after its date of publication.
- Standard16 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft11 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.