SIST ISO/IEC 9995-8:2008

Information technology -- Keyboard layouts for text and office systems -- Part 8: Allocation of letters to the keys of a numeric keypad

Within the general scope described in lSO/IEC 9995-1, this part of lSO/IEC 9995 specifies the allocation of letters to the keys of the numeric zone ZN0 of a keyboard which has the ten digits zero to nine allocated in the "1-2-3" layout. The layout specified in this part of lSO/IEC 9995 is intended for applications of information technology equipment keyboards where letters instead of digits are used for the mnemonic retention of numeric information. The use of letters on the numeric zone ZN0 for the mnemonic retention of numeric information is strongly deprecated on keyboards which also contain an alphanumeric section. The inclusion of two sets of alphabetical symbols used in different ways could confuse the user of the keyboard.

Technologies de l'information -- Disposition des claviers conçus pour la bureautique -- Partie 8: Affectation de lettres aux touches d'un clavier numérique

Dans le domaine d'application général de l'ISO/CEI 9995-1, l'ISO/CEI 9995-8:2006 normalise l'attribution de lettres aux touches de la zone numérique ZN0 d'un clavier, à laquelle sont déjà attribués les dix chiffres de zéro à neuf dans sa disposition dite «1-2-3». La disposition normalisée est destinée aux applications des claviers utilisés pour les technologies de l'information, là où des lettres sont utilisées à la place des chiffres pour faciliter la mémorisation de l'information numérique.

Informacijska tehnologija - Razpored tipk na tipkovnici za potrebe besedil in pisarniških sistemov - 8. del: Dodelitev črk tipkam na numerični tipkovnici

General Information

• Status: Withdrawn
• Publication Date: 09-Sep-2008
• Withdrawal Date: 03-Jun-2010
• ICS: 35.180 - IT Terminal and other peripheral equipment
• Technical Committee: ITC - Information technology
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 03-Jun-2010
• Due Date: 26-Jun-2010
• Completion Date: 04-Jun-2010
• Ref Project: ISO/IEC 9995-8:2006 - Information technology — Keyboard layouts for text and office systems — Part 8: Allocation of letters to the keys of a numeric keypad

Relations

• Replaced By: SIST ISO/IEC 9995-8:2010 - Information technology - Keyboard layouts for text and office systems - Part 8: Allocation of letters to the keys of a numeric keypad
• Effective Date: 01-Jul-2010

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 9995-8
Second edition
2006-09-01


Information technology — Keyboard
layouts for text and office systems —
Part 8:
Allocation of letters to the keys of a
numeric keypad
Technologies de l'information — Disposition des claviers conçus pour la
bureautique —
Partie 8: Affectation de lettres aux touches d'un clavier numérique




Reference number
ISO/IEC 9995-8:2006(E)
©
ISO/IEC 2006

---------------------- Page: 1 ----------------------
ISO/IEC 9995-8:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO/IEC 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2006 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 9995-8:2006(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 9995-8 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 35, User interfaces.
This second edition cancels and replaces the first edition (ISO/IEC 9995-8:1994), which has been technically
revised.
ISO/IEC 9995 consists of the following parts, under the general title Information technology — Keyboard
layouts for text and office systems:
⎯ Part 1: General principles governing keyboard layouts
⎯ Part 2: Alphanumeric section
⎯ Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section
⎯ Part 4: Numeric section
⎯ Part 5: Editing section
⎯ Part 6: Functi
...

SLOVENSKI STANDARD
oSIST ISO/IEC 9995-8:2007
01-februar-2007
,QIRUPDFLMVNDWHKQRORJLMD5D]SRUHGWLSNQDWLSNRYQLFL]DSRWUHEHEHVHGLOLQ
SLVDUQLãNLKVLVWHPRYGHO'RGHOLWHYþUNWLSNDPQDQXPHULþQLWLSNRYQLFL
Information technology - Keyboard layouts for text and office systems - Part 8: Allocation
of letters to the keys of a numeric keypad
Ta slovenski standard je istoveten z:
ICS:
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
oSIST ISO/IEC 9995-8:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

INTERNATIONAL ISO/IEC
STANDARD 9995-8
Second edition
2006-09-01


Information technology — Keyboard
layouts for text and office systems —
Part 8:
Allocation of letters to the keys of a
numeric keypad
Technologies de l'information — Disposition des claviers conçus pour la
bureautique —
Partie 8: Affectation de lettres aux touches d'un clavier numérique




Reference number
ISO/IEC 9995-8:2006(E)
©
ISO/IEC 2006

---------------------- Page: 2 ----------------------

ISO/IEC 9995-8:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO/IEC 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2006 – All rights reserved

---------------------- Page: 3 ----------------------

ISO/IEC 9995-8:2006(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 9995-8 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 35, User interfaces.
This second edition cancels and replaces the first edition (ISO/IEC 9995-8:1994), which ha
...

SLOVENSKI STANDARD
SIST ISO/IEC 9995-8:2008
01-oktober-2008
,QIRUPDFLMVNDWHKQRORJLMD5D]SRUHGWLSNQDWLSNRYQLFL]DSRWUHEHEHVHGLOLQ
SLVDUQLãNLKVLVWHPRYGHO'RGHOLWHYþUNWLSNDPQDQXPHULþQLWLSNRYQLFL
Information technology -- Keyboard layouts for text and office systems -- Part 8:
Allocation of letters to the keys of a numeric keypad
Technologies de l'information -- Disposition des claviers conçus pour la bureautique --
Partie 8: Affectation de lettres aux touches d'un clavier numérique
Ta slovenski standard je istoveten z: ISO/IEC 9995-8:2006
ICS:
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
SIST ISO/IEC 9995-8:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

INTERNATIONAL ISO/IEC
STANDARD 9995-8
Second edition
2006-09-01


Information technology — Keyboard
layouts for text and office systems —
Part 8:
Allocation of letters to the keys of a
numeric keypad
Technologies de l'information — Disposition des claviers conçus pour la
bureautique —
Partie 8: Affectation de lettres aux touches d'un clavier numérique




Reference number
ISO/IEC 9995-8:2006(E)
©
ISO/IEC 2006

---------------------- Page: 2 ----------------------

ISO/IEC 9995-8:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO/IEC 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2006 – All rights reserved

---------------------- Page: 3 ----------------------

ISO/IEC 9995-8:2006(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 9995-8 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 35, User interfaces.
...

NORME ISO/CEI
INTERNATIONALE 9995-8
Deuxième édition
2006-09-01


Technologies de l'information —
Disposition des claviers conçus pour la
bureautique —
Partie 8:
Affectation de lettres aux touches d'un
clavier numérique
Information technology — Keyboard layouts for text and office
systems —
Part 8: Allocation of letters to the keys of a numeric keypad




Numéro de référence
ISO/CEI 9995-8:2006(F)
©
ISO/CEI 2006

---------------------- Page: 1 ----------------------
ISO/CEI 9995-8:2006(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO/CEI 2006
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Publié en Suisse

ii © ISO/CEI 2006 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/CEI 9995-8:2006(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) et la CEI (Commission électrotechnique internationale)
forment le système spécialisé de la normalisation mondiale. Les organismes nationaux membres de l'ISO ou
de la CEI participent au développement de Normes internationales par l'intermédiaire des comités techniques
créés par l'organisation concernée afin de s'occuper des domaines particuliers de l'activité technique. Les
comités techniques de l'ISO et de la CEI collaborent dans des domaines d'intérêt commun. D'autres
organisations internationales, gouvernementales et non gouvernementales, en liaison avec l'ISO et la CEI
participent également aux travaux. Dans le domaine des technologies de l'information, l'ISO et la CEI ont créé
un comité technique mixte, l'ISO/CEI JTC 1.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale du comité technique mixte est d'élaborer les Normes internationales. Les projets de
Normes internationales adoptés par le comité technique mixte sont soumis aux organismes nationaux pour
vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des
organismes nationaux votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO et la CEI ne sauraient être tenues pour
responsables de ne pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO/CEI 9995-8 a été élaborée par le comité technique mixte ISO/CEI JTC 1, Technologies de l'information,
sous-comité SC 35, Interfaces utilisateur.
Cette deuxième édition annule et remplace la première édition (ISO/CEI 9995-8:1994), qui a fait l'objet d'une
révision technique.
L'ISO/CEI 9995 comprend les parties suivantes, présentées sous le titre général Technologies de
l'information — Disposition des claviers conçus pour la bureautique:
⎯ Partie 1: Principes généraux pour la disposition de claviers
⎯ Partie 2: Module alphanumérique
⎯ Partie 3: Dispositions complémentaires de la zone alphanumérique du module alphanumérique
⎯ Partie 4: Module numérique
⎯ Partie 5: Module d'édition
⎯ Par
...