SIST EN 14188-4:2010

Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants

This European Standard specifies requirements for material characterisation for primers for hot and cold applied joint sealants for use in roads, airfields and other concrete pavements. This European Standard also applies to primers for hot and cold applied joint sealants in bituminous surfacing and a bituminous surfacing and an adjacent concrete pavement.

Fugeneinlagen und Fugenmassen - Teil 4: Spezifikationen für Voranstriche für Fugeneinlagen und Fugenmassen

Diese Europäische Norm legt Anforderungen an die Materialbeschreibung von Voranstrichen für Fugenmassen
für Heiß- und Kaltanwendung beim Bau von Straßen, Flugplätzen und sonstigen Verkehrsflächen
fest. Diese Europäische Norm gilt auch für Voranstriche für heiß und kalt verarbeitbare Fugenmassen für
Asphaltflächen und zwischen Asphaltflächen und benachbarten Betonflächen.

Produits de scellement de joints - Partie 4: Spécifications relatives aux primaires utilisés avec les produits de scellement de joints

Polnilne in tesnilne mase za stike - 4. del: Specifikacije za predhodne premaze po uporabi tesnilnih mas za stike

Ta evropski standard opredeljuje zahteve za opis lastnosti materialov za predhodne premaze za hladno in toplo nanosljive tesnilne mase za stike za uporabo pri cestah, letališčih in drugih betonskih tlakih. Ta evropski standard velja tudi za predhodne premaze za hladno in toplo nanosljive tesnilne mase za stike pri bituminoznih krovnih plasteh ter za bituminozne krovne plasti in sosednji betonski tlak.

General Information

• Status: Published
• Public Enquiry End Date: 19-Apr-2009
• Publication Date: 14-Dec-2009
• ICS: 91.100.50 - Binders. Sealing materials
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 23-Nov-2009
• Due Date: 28-Jan-2010
• Completion Date: 15-Dec-2009
• Ref Project: EN 14188-4:2009 - Joint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Polnilne in tesnilne mase za stike - 4. del: Specifikacije za predhodne premaze po uporabi tesnilnih mas za stikeFugeneinlagen und Fugenmassen - Teil 4: Spezifikationen für Voranstriche für Fugeneinlagen und FugenmassenProduits de scellement de joints - Partie 4: Spécifications relatives aux primaires utilisés avec les produits de scellement de jointsJoint fillers and sealants - Part 4: Specifications for primers to be used with joint sealants93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14188-4:2009SIST EN 14188-4:2010en,de01-januar-2010SIST EN 14188-4:2010SLOVENSKI
STANDARD



SIST EN 14188-4:2010



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14188-4July 2009ICS 93.080.20 English VersionJoint fillers and sealants - Part 4: Specifications for primers to beused with joint sealantsProduits de scellement de joints - Partie 4: Spécificationsrelatives aux primaires utilisés avec les produits descellement de jointsFugeneinlagen und Fugenmassen - Teil 4: Spezifikationenfür Voranstriche für Fugeneinlagen und FugenmassenThis European Standard was approved by CEN on 6 June 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14188-4:2009: ESIST EN 14188-4:2010



EN 14188-4:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Types .55Requirements .55.1Homogeneity .55.2Density .55.3Viscosity .55.4Resistance against alkali .55.5Evaporation behaviour of volatiles .55.6Solid content .55.7Flash point .65.8Softening point of solids .65.8.1Bitumen based primers .65.8.2Resin based primers .65.9Dangerous substances .66Evaluation of conformity .66.1General .66.2Type testing .66.2.1Initial Type Testing .66.2.2Further type testing .76.3Factory Production Control (FPC) .76.3.1General .76.3.2Frequency of testing .76.3.3Equipment .76.3.4Raw materials and components .76.3.5Design process .76.3.6Non-conforming products .77Marking, labelling and packaging .87.1General .87.2Primer .87.3Containers .8Annex A (normative)
Initial Type Testing and frequencies of testing for Factory Production Control
.................................................................................................................................................................9Annex B (informative)
Example of a product data sheet . 10 SIST EN 14188-4:2010



EN 14188-4:2009 (E) 3 Foreword This document (EN 14188-4:2009) has been prepared by Technical Committee CEN/TC 227 “Road Materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This European Standard is one of a series of standards as listed below:  EN 14188-1, Joint fillers and sealants – Part 1: Specifications for hot applied sealants;  EN 14188-2, Joint fillers and sealants – Part 2: Specifications for cold applied sealants;  EN 14188-3, Joint fillers and sealants – Part 3: Specifications for preformed joint seals;  EN 14188-4, Joint fillers and sealants – Part 4: Specifications for primers to be used with joint sealants. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 14188-4:2010



EN 14188-4:2009 (E) 4 1 Scope This European Standard specifies requirements for material characterisation for primers for hot and cold applied joint sealants for use in roads, airfields and other concrete pavements. This European Standard also applies to primers for hot and cold applied joint sealants in bituminous surfacing and a bituminous surfacing and an adjacent concrete pavement.
2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1427, Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method EN 12697-3, Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator EN 14188-1:2004, Joint fillers and sealants — Part 1: Specifications for hot applied sealants EN 14188-2:2004, Joint fillers and sealants — Part
...