SIST EN 14187-9:2019
(Main)Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants
Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants
This draft European Standard specifies a function test for cold applied joint sealants intended for use in joints in roads and airfield pavements in cold climate areas where the total joint movement can be greater than 35 % and the temperature can go below -25 °C.
Kalt verarbeitbare Fugenmassen - Prüfverfahren - Teil 9: Funktionsprüfung von Fugenmassen
Dieser Europäische Norm-Entwurf legt eine Funktionsprüfung für kalt verarbeitbare Fugenmassen fest, die für die Anwendung in Fugen in Fahrbahnbefestigungen und Flugplatzdecken in kalten Klimazonen, in denen die Bewegungen der Fugen insgesamt 35 % überschreiten können und die Temperatur − 25 °C unterschreiten kann, vorgesehen sind.
Produits de scellement de joints appliqués à froid - Méthodes d'essais - Partie 9 : Test fonctionnel sur scellement de joints
Hladno nanosljive tesnilne mase za stike - Preskusne metode - 9. del: Preskušanje funkcionalnosti tesnilnih mas za stike
Ta osnutek evropskega standarda določa preskus funkcionalnosti za hladno nanosljive tesnilne mase za stike, ki se uporabljajo za stike na cestah in letalskih stezah v območjih s hladnim podnebjem, kjer so skupni premiki stikov lahko večji od 35 %, temperatura pa lahko pade pod –25 °C.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hladno nanosljive tesnilne mase za stike - Preskusne metode - 9. del: Preskušanje funkcionalnosti tesnilnih mas za stikeKalt verarbeitbare Fugenmassen - Prüfverfahren - Teil 9: Funktionsprüfung von FugenmassenProduits de scellement de joints appliqués à froid - Méthodes d'essais
- Partie 9 : Test fonctionnel sur scellement de jointsCold applied joint sealants - Test methods - Part 9: Function testing of joint sealants93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-9:2019SIST EN 14187-9:2019en,fr,de01-maj-2019SIST EN 14187-9:2019SLOVENSKI
STANDARDSIST EN 14187-9:20061DGRPHãþD
SIST EN 14187-9:2019
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14187-9
March
t r s { ICS
{ uä r z rä t r Supersedes EN
s v s z yæ {ã t r r xEnglish Version
Cold applied joint sealants æ Test methods æ Part
{ã Function testing of joint sealants Produits de scellement de joints appliqués à froid æ Méthodes d 5essais
æ Partie
{ ã Test fonctionnel sur scellement de joints
Kalt verarbeitbare Fugenmassen æ Prüfverfahren æ Teil
{ã Funktionsprüfung von Fugenmassen This European Standard was approved by CEN on
t w July
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s { CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v s z yæ {ã t r s { ESIST EN 14187-9:2019
EN 14187-9:2019 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Principle . 4 5 Apparatus and materials . 4 6 Preparation of the test specimens . 5 7 Procedure. 6 7.1 Conditioning cycle . 6 7.2 After conditioning . 8 7.3 Test procedure . 8 8 Calculation and expression of results . 10 9 Test report . 10 Bibliography . 11
SIST EN 14187-9:2019
EN 14187-9:2019 (E) 3 European foreword This document (EN 14187-9:2019) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by BSI. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2019, and conflicting national standards shall be withdrawn at the latest by September 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14187-9:2006. This document is one of a series of standards as listed below: — EN 14187-1, Cold applied joint sealants — Test methods — Part 1: Determination of rate of cure; — EN 14187-2, Cold applied joint sealants — Test methods — Part 2: Determination of tack free time; — EN 14187-3, Cold applied joint sealants — Test methods — Part 3: Determination of self-levelling properties; — EN 14187-4, Cold applied joint sealants — Test methods — Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals; — EN 14187-5, Cold applied joint sealants — Test methods — Part 5: Determination of the resistance to hydrolysis; — EN 14187-6, Cold applied joint sealants — Test method — Part 6: Determination of the adhesion/cohesion properties after immersion in test fuels and liquid chemicals; — EN 14187-7, Cold applied joint sealants — Test methods — Part 7: Determination of the resistance to flame; — EN 14187-8, Cold applied joint sealants — Test methods — Part 8: Determination of the artificial weathering by UV-irradiation; — EN 14187-9, Cold applied joint sealants — Test methods — Part 9: Function testing of joint sealants. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 14187-9:2019
EN 14187-9:2019 (E) 4 1 Scope This document specifies a function test for cold applied joint sealants intended for use in joints in roads and airfield pavements in cold climate areas where the total joint movement can be greater than 35 % and the temperature can go below –25°C. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies EN 13880-12, Hot applied joint sealants — Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods)
EN 14187-2, Cold applied joint sealants — Part 2: Test method for the determination of tack free time EN ISO 6927:2012, Buil
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.