iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 431:1999

(Main)

Resilient floor coverings - Determination of peel resistance

Resilient floor coverings - Determination of peel resistance

This European Standard specifies a method for determining the resistance against separation of two layers of a resilient floor coverings by peeling.

Elastische Bodenbeläge - Bestimmung des Trennwiderstandes

Diese Europäische Norm legt ein Verfahren zur Bestimmung des Widerstandes bei der Trennung von zwei Schichten eines elastischen Bodenbelags im Schälversuch fest.

Revetements de sol résilients - Détermination de la résistance au pelage

La présente Norme Européenne prescrit une méthode de détermination de la résistance a la séparation de deux couches de revetements de sol résilients, par pelage.

Netekstilne talne obloge - Ugotavljanje odpornosti proti luščenju

General Information

Status
Withdrawn
Publication Date
28-Feb-1999
Withdrawal Date
21-Mar-2012
ICS
97.150 - Floor coverings
Technical Committee
ITEK - Textile and textile products
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
22-Mar-2012
Due Date
14-Apr-2012
Completion Date
22-Mar-2012
Directive
89/106/EEC - Construction products
Ref Project
EN 431:1994 - Resilient floor coverings - Determination of peel resistance

Relations

Replaced By
SIST EN ISO 24345:2012 - Resilient floor coverings - Determination of peel resistance (ISO 24345:2006)
Effective Date
01-May-2012

Buy Standard

EN 431:1999EN 431:1999
PreviousNext
Standard
EN 431:1999
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elastische Bodenbeläge - Bestimmung des TrennwiderstandesRevetements de sol résilients - Détermination de la résistance au pelageResilient floor coverings - Determination of peel resistan
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 17861:2023(Main)
Resilient, textile, laminate and modular mechanical locked floor coverings - Circular Economy - Terms and definitions
EN 17861:2023

This document defines terms regarding circular economy that are used by the flooring sector.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16511:2023(Main)
Modular mechanical locked floor coverings (MMF) - Specification, requirements and test method for multilayer modular panels for floating installation
EN 16511:2023

This document specifies the characteristics of multilayer mechanical locked floor covering with a wear-
resistant and decorative surface layer supplied in panels (either tile or plank form). The floor panels are
considered suitable for domestic and commercial levels of use and designed for floating installation.
This document does not apply to resilient floor panels for loose-laying according to EN ISO 20326, to
multilayer wood floorings according to EN 13489, to wood veneer floor coverings according to EN 14354,
to laminate floor covering according to EN 13329, EN 14978 and EN 15468 nor to products specified in
EN ISO 10581, EN ISO 10582, EN ISO 24011, EN 12104 and ISO 14486.
This document is applicable to areas which are subject to frequent wetting, e.g. bathrooms, laundry rooms
or saunas, only if specified by the producer.
This document also includes requirements for marking and packaging.
In Annex A (informative), optional properties are given. In Annex B (informative), a test method for the
classification of the flexibility is given.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12104:2023(Main)
Resilient floor coverings - Cork floor tiles - Specification
EN 12104:2023

This document specifies the requirements for cork floor coverings made from agglomerated composition cork, with or without a decorative surface layer, with or without applied colours, supplied in tile form which are designed to be used with a factory finish and/or an in situ finish.
The cork floor decorative surface layer can be made of cork or other bio-based decorative materials, e.g. wood or bamboo veneers, linoleum, leather or natural fibres.
This document includes a classification system based on intensity of use which shows where cork floor tiles with a factory finish can give satisfactory service (see EN ISO 10874). It also specifies requirements for marking, labelling and packing.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 26986:2012/A1:2022(Amendment)
Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification - Amendment 1 (ISO 26986:2010/Amd 1:2022)
EN ISO 26986:2012/A1:2022

ISO 26986:2010 specifies the characteristics of floor coverings based on expanded (cushioned) poly(vinyl chloride), supplied as either tiles or rolls.
ISO 26986:2010 includes a classification system based on the intensity of use, which shows where resilient floor coverings give satisfactory service.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11638:2022(Main)
Resilient floor coverings - Heterogeneous poly(vinyl chloride) flooring on foam - Specification (ISO 11638:2020, including corrected version 2021-09)
EN ISO 11638:2022

This document specifies the characteristics of heterogeneous poly(vinyl chloride) flooring on foam, based on poly(vinyl chloride), and supplied in roll form or tile and plank. Such products can contain a transparent, non PVC factory finish.
To encourage the consumer to make an informed choice, this document includes a classification system, based on intensity of use, which shows where these floor coverings can be expected to give satisfactory service.
It also specifies requirements for marking.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17849:2022(Main)
Resilient, textile, laminate and modular mechanical locked floor coverings - Guidance on how to implement EN 14041:2004/AC:2006 under the Construction Products Regulation EU 305/2011 (CPR)
CEN/TR 17849:2022

This document concerns floor covering products falling under the scope of EN 14041 as well as mandate M/119 and M/119 rev.1. Such products are considered construction products for indoor use.
Excluded are products which are loose laid (barrier)mats, runners and rugs, as well as products which might be covered by other harmonized standards, such as indoor sports flooring, or other legislation such as flooring in public transport.
The purpose of this document is to provide guidance on how to deal with the situation that
a)   the version EN 14041:2004/AC:2006 has to be used for placing CEN TC134 products onto the European market, even though it
1)   was developed under the no longer applicable “Council Directive 89/106/EEC on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (CPD)”,
and
2)   has been withdrawn and replaced by EN 14041:2018 in the current CEN catalogue;
and
b)   the more recent version EN 14041:2018 cannot be used for placing CEN TC134 products onto the European market, even though it
1)   was developed under the currently applicable legislation, “Regulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (CPR)”
2)   is the active version of the standard in the current CEN catalogue.
The focus will be on an overview of the resources available from the European commission for CE marking and placing products onto the European market as well as how to implement EN 14041:2004/AC:2006 under the current European legislation pointing out sections which are no longer valid.

  • Technical report
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23999:2022(Main)
Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2021)
EN ISO 23999:2021

This document specifies a method for determining dimensional stability and curling of resilient floor
coverings, in the form of sheets, tiles or planks after exposure to heat.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14978:2016+A1:2021(Main)
Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods
EN 14978:2016+A1:2021

This European Standard specifies characteristics, requirements and test methods for laminate floor coverings with acrylic based surface layer, electron beam cured as defined in 3.1 and 3.2.
It includes a classification system based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging.
Laminate floor coverings are considered for domestic and commercial levels of use, e.g. for use in domestic kitchens. This standard does not specify requirements related to areas that are subject to frequent wetting, such as bathrooms, laundry rooms or saunas.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13329:2016+A2:2021(Main)
Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods
EN 13329:2016+A2:2021

This European Standard specifies characteristics, requirements and test methods for laminate floor coverings with a surface layer based on aminoplastic thermosetting resins as defined in 3.1 and 3.2. It also specifies requirements for marking and packaging.
It includes a classification system, based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice.
Laminate floor coverings are considered for domestic and commercial levels of use, including domestic kitchens. This standard does not specify requirements relating to areas which are subjected to frequent wetting, such as bathrooms, laundry rooms or saunas.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15468:2016+A1:2021(Main)
Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
EN 15468:2016+A1:2021

This European Standard specifies characteristics, states requirements and gives test methods for laminate floor coverings (as defined in 3.1).
It includes a classification system, based on EN ISO 10874, providing practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging.
Laminate floor coverings are considered for domestic and commercial levels of use, e.g. in domestic kitchens. This standard does not specify requirements relating to areas that are subject to frequent wetting, such as bathrooms, laundry rooms or saunas.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day