SIST EN ISO 9173-3:2014

Dentistry - Extraction forceps - Part 3: Design (ISO 9173-3:2014)

ISO 9173-3:2014 specifies the design for extraction forceps used in dentistry.

Zahnheilkunde - Extraktionszangen - Teil 3: Design (ISO 9173-3:2014)

Dieser Teil der ISO 9173 beschreibt das Design von Extraktionszangen, die in der Zahnheilkunde verwendet werden.

Médecine bucco-dentaire - Daviers - Partie 3: Conception (ISO 9173-3:2014)

l'ISO 9173-3:2014 spécifie la conception des daviers utilisés en médecine bucco-dentaire.

Zobozdravstvo - Klešče za ekstrakcijo - 3. del: Načrtovanje (ISO 9173-3:2014)

EN ISO 9173-3 določa načrtovanje klešč za ekstrakcijo, ki se uporabljajo v zobozdravstvu.

General Information

• Status: Published
• Public Enquiry End Date: 19-May-2013
• Publication Date: 05-Jun-2014
• ICS: 11.060.20 - Dental equipment
• Technical Committee: VAZ - Healthcare
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-May-2014
• Due Date: 19-Jul-2014
• Completion Date: 06-Jun-2014
• Directive: Not Harmonized93/42/EEC - Medical devices
• Ref Project: EN ISO 9173-3:2014 - Dentistry - Extraction forceps - Part 3: Design (ISO 9173-3:2014)

Relations

• Refers: SIST EN 14655:2005+A1:2010 - Food processing machinery - Baguette slicers - Safety and hygiene requirements
• Effective Date: 28-Jan-2026

Overview

SIST EN ISO 9173-3:2014 - Dentistry - Extraction Forceps - Part 3: Design (ISO 9173-3:2014) is a European and international standard developed by the Slovenian Institute for Standardization (SIST), specifying the requirements for the design of extraction forceps used in dental practices. Extraction forceps are precision instruments essential for the safe and effective removal of teeth, and this standard unifies expectations for their construction, classification, and ergonomic features. The document is harmonized with other parts of ISO 9173, supporting consistent manufacturing quality and patient safety in dental procedures.

Key Topics

SIST EN ISO 9173-3 focuses on clear definitions and requirements related to the design of dental extraction forceps, including:

• Design Elements: Classification and definition of beak, joint, and handle shapes for extraction forceps.
  • Beak types: Coated or non-coated, smooth or serrated, adapted for universal or specific applications.
  • Joint types: Circular joint, lap joint, box lock Type 1, and box lock Type 2.
  • Handle types: Straight or curved, with ergonomic considerations for grip and stability.
• Dimensional Characteristics: Standardized measurement points, such as beak thickness, beak width, offsets, and overall length, facilitating uniform quality and performance.
• Classification: Systematic approach to forceps identification based on their configuration and intended use (including adult and pediatric variants).
• Intended Application: Guidance for manufacturers to specify the clinical use of each forceps design, supporting correct selection and application in dental practice.

Applications

Adherence to ISO 9173-3:2014 supports a broad array of practical benefits in the dental field:

• Manufacturing Consistency: By providing standardized dimensions and design features, the standard allows manufacturers to produce dental extraction forceps that are interoperable and recognized globally.
• User Safety & Efficacy: Dentists and dental professionals benefit from forceps designed for optimal grip, control, and access, reducing risks to both operator and patient during tooth extraction.
• Device Selection: Dental clinics and procurement professionals can evaluate and select forceps based on a unified set of specifications suited for various dental procedures and patient groups.
• Educational & Regulatory Support: Training programs for dentists, as well as regulatory compliance efforts, leverage the standard’s clear terminology and requirements to ensure best practices in dental care.

Related Standards

SIST EN ISO 9173-3:2014 is part of a coordinated set of international standards governing dental extraction forceps:

• ISO 9173-1: General requirements and test methods for extraction forceps.
• ISO 9173-2: Guidelines for the designation and identification of forceps designs.
• ISO 1942: Vocabulary in dentistry for consistent terminology.
• ISO 15087: Standards for dental elevators, which are often used in conjunction with extraction forceps.

Using these related standards together ensures comprehensive coverage of the quality, terminology, and use of dental extraction instruments within clinical and regulatory frameworks.

---

Keywords: Dentistry, extraction forceps, dental instruments, forceps design, dental equipment standard, ISO 9173-3, SIS EN ISO 9173-3:2014, dental extraction tools, dental forceps classification, dental device manufacturing.

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2014
=RER]GUDYVWYR.OHãþH]DHNVWUDNFLMRGHO1DþUWRYDQMH,62
Dentistry - Extraction forceps - Part 3: Design (ISO 9173-3:2014)
Zahnheilkunde - Extraktionszangen - Teil 3: Design (ISO 9173-3:2014)
Médecine bucco-dentaire - Daviers - Partie 3: Conception (ISO 9173-3:2014)
Ta slovenski standard je istoveten z: EN ISO 9173-3:2014
ICS:
11.060.20 =RERWHKQLþQDRSUHPD Dental equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 9173-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 11.060.20
English Version
Dentistry - Extraction forceps - Part 3: Design (ISO 9173-3:2014)
Médecine bucco-dentaire - Daviers - Partie 3: Conception Zahnheilkunde - Extraktionszangen - Teil 3: Design (ISO
(ISO 9173-3:2014) 9173-3:2014)
This European Standard was approved by CEN on 17 April 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9173-3:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (EN ISO 9173-3:2014) has been prepared by Technical Committee ISO/TC 106 “Dentistry” in
collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawn
at the latest by November 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9173-3:2014 has been approved by CEN as EN ISO 9173-3:2014 without any modification.

INTERNATIONAL ISO
STANDARD 9173-3
First edition
2014-05-01
Dentistry — Extraction forceps —
Part 3:
Design
Médecine bucco-dentaire — Daviers —
Partie 3: Conception
Reference number
ISO 9173-3:2014(E)
©
ISO 2014
ISO 9173-3:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

ISO 9173-3:2014(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
3.1 Terms and definitions . 1
3.2 Symbols . 1
4 Classification . 3
4.1 General . 3
4.2 Joint design . 3
4.3 Handle shape . 4
4.4 Beak shape . 5
5 Handle types . 5
5.1 General . 5
5.2 Straight handle . 5
5.3 Curved handle . 6
6 Intended application . 8
Bibliography . 9
---------------------- P
...