kSIST FprEN IEC 61753-053-02:2022
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 053-02: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments
Fibre optic interconnecting devices and passive components - Performance standard - Part 053-02: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments
D133/C027: for all CLC/TC 86BXA revisions of standards, the dow is set to dow= dor + 12 months
Lichtwellenleiter – Verbindungselemente und passive Bauteile – Betriebsverhalten – Teil 053-2: Nicht mit Steckverbindern versehene, elektrisch kontrolliert änderbare optische Dämpfungsglieder für Einmodenfasern für die Kategorie C – Kontrollierte Umgebung
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 053-02: Affaiblisseur optique variable commandé électriquement, à fibres unimodales, non connectorisé, pour la catégorie C - Environnements contrôlés
IEC 61753-053-02: 2022 contient les exigences minimales initiales d’essai et de mesure, ainsi que les sévérités auxquelles un affaiblisseur optique variable commandé électriquement, à fibres unimodales, non connectorisé, doit satisfaire pour être classé comme étant conforme aux exigences de la catégorie C – Environnements contrôlés, selon la définition donnée à l’Annexe A de l’IEC 61753-1:2018. Cette première édition annule et remplace l'IEC 61753-053-2 parue en 2014. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’IEC 61753‑053‑2:2014: a) harmonisation des termes et définitions avec ceux de l’IEC 60869-1 et de l’IEC TS 62627-09; b) harmonisation des éléments soumis à essai et des conditions d’essai avec l’IEC 61753‑1:2018 et l’IEC 61753‑1:2018/AMD1:2020.
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 053-02. del: Električno krmiljeni spremenljivi optični slabilnik brez konektorjev za enorodovna vlakna za kategorijo C - Nadzorovana okolja
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61753-053-02:2022
01-februar-2022
Optični spojni elementi in pasivne komponente - Tehnični standard - 053-02. del:
Električno krmiljeni spremenljivi optični slabilnik brez konektorjev za enorodovna
vlakna za kategorijo C - Nadzorovana okoljaFibre optic interconnecting devices and passive components - Performance standard -
Part 053-02: Non-connectorized single-mode fibre, electrically controlled, variable optical
attenuator for category C - Controlled environmentsDispositifs d'interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 053-02: Affaiblisseur optique variable commandé électriquement, à
fibres unimodales, non connectorisé, pour la catégorie C - Environnements contrôlés
Ta slovenski standard je istoveten z: prEN IEC 61753-053-02:2021ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61753-053-02:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN IEC 61753-053-02:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61753-053-02:2022
86B/4532/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61753-053-02 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2021-11-19 2022-02-11
SUPERSEDES DOCUMENTS:
86B/4474/CD, 86B/4506A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel votingThe attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.TITLE:
Fibre optic interconnecting devices and passive components - Performance standard - Part
053-02: Non-connectorized single-mode fibre, electrically controlled, variable optical
attenuator for category C - Controlled environmentsPROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:
Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.---------------------- Page: 3 ----------------------
oSIST prEN IEC 61753-053-02:2022
IEC CDV 61753-053-02/Ed1 © IEC 2021 – 2 – 86B/4532/CDV
1 CONTENTS
3 FOREWORD ........................................................................................................................... 3
4 1 Scope .............................................................................................................................. 5
5 2 Normative references ...................................................................................................... 5
6 3 Terms and definitions ...................................................................................................... 6
7 4 Test conditions ................................................................................................................ 7
8 5 Test report ....................................................................................................................... 7
9 6 Reference components .................................................................................................... 7
10 7 Performance requirements .............................................................................................. 8
11 7.1 Dimensions ............................................................................................................. 8
12 7.2 Test details and requirements ................................................................................. 8
13 Annex A (normative) Sample size ........................................................................................ 13
14 Bibliography .......................................................................................................................... 14
16 Table 1 – Single-mode spectral bands .................................................................................... 7
17 Table 2 – Test details and requirements ................................................................................. 9
18 Table A.1 – Number of samples for each test ........................................................................ 13
---------------------- Page: 4 ----------------------oSIST prEN IEC 61753-053-02:2022
IEC CDV 61753-053-02/Ed1 © IEC 2021 – 3 – 86B/4532/CDV
23 INTERNATIONAL ELECTROTECHNICAL COMMISSION
24 ____________
26 FIBRE OPTIC INTERCONNECTING DEVICES AND
27 PASSIVE COMPONENTS – PERFORMANCE STANDARD –
29 Part 053-02: Non-connectorized, single-mode fibre, electrically controlled,
30 variable optical attenuator for category C – Controlled environments
32 FOREWORD
33 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
34 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
35 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
36 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
37 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
38 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
39 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
40 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
41 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
42 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
43 consensus of opinion on the relevant subjects since each technical committee has representation from all
44 interested IEC National Committees.45 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
46 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
47 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
48 misinterpretation by any end user.49 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
50 transparently to the maximum extent possible in their national and regional publications. Any divergence between
51 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
52 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
53 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
54 services carried out by independent certification bodies.55 6) All users should ensure that they have the latest edition of this publication.
56 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
57 members of its technical committees and IEC National Committees for any personal injury, property damage or
58 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
59 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
60 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
61 indispensable for the correct application of this publication.62 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
63 rights. IEC shall not be held responsible for identifying any or all such patent rights.
64 International Standard IEC 61753-053-02 has been prepared by subcommittee 86B: Fibre optic
65 interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
66 This first edition cancels and replaces the first edition of IEC 61753-053-2 published in 2014.
67 This edition constitutes a technical revision.68 This edition includes the following significant technical changes with respect to the previous
69 edition:70 a) Harmonization of terms and definitions with those in IEC 60869-1 and IEC TS 62627-09;
71 b) Harmonization of test items and their conditions with IEC 61753-1:2018, COR1:2019 and
72 AMD1:2020.73 The text of this standard is based on the following documents:
FDIS Report on voting
---------------------- Page: 5 ----------------------
oSIST prEN IEC 61753-053-02:2022
IEC CDV 61753-053-02/Ed1 © IEC 2021 – 4 – 86B/4532/CDV
86B/xxxx/FDIS 86B/xxxx/RVD
75 Full information on the voting for the approval of this standard can be found in the report on
76 voting indicated in the above table.77 The French version of this standard has not been voted upon.
78 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
79 A list of all parts in the IEC 61753 series, published under the general title Fibre optic
80 interconnecting devices and passive components – performance standard, can be found on the
81 IEC website.82 The committee has decided that the contents of this publication will remain unchanged until the
83 stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
84 the specific publication. At this date, the publication will be85 • reconfirmed,
86 • withdrawn,
87 • replaced by a revised edition, or
88 • amended.
---------------------- Page: 6 ----------------------
oSIST prEN IEC 61753-053-02:2022
IEC CDV 61753-053-02/Ed1 © IEC 2021 – 5 – 86B/4532/CDV
92 FIBRE OPTIC INTERCONNECTING DEVICES AND
93 PASSIVE COMPONENTS – PERFORMANCE STANDARD –
95 Part 053-02: Non-connectorized, single-mode fibre, electrically controlled,
96 variable optical attenuator for category C – Controlled environments
98 1 Scope
99 This part of IEC 61753 contains the minimum initial test and measurement requirements and
100 severities which non-connectorized single-mode fibre electrically controlled variable optical
101 attenuator needs to satisfy in order to be categorised as meeting the requirements of category
102 C-Controlled environments, as defined in Annex A of IEC 61753-1.103 2 Normative references
104 The following documents, in whole or in part, are normatively referenced in this document and
105 are indispensable for its application. For dated references, only the edition cited applies. For
106 undated references, the latest edition of the referenced document (including any amendments)
107 applies.108 IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for
109 class B single-mode fibres110 IEC 60794-2-50, Optical fibre cables – Part 2-50: Indoor cables – Family specification for
111 simplex and duplex cables for use in terminated cable assemblies112 IEC 60869-1, Fibre optic interconnecting devices and passive components – Fibre optic passive
113 power control devices – Part 1: Generic specification114 IEC 61300 (all parts), Fibre optic interconnecting devices and passive components – Basic test
115 and measurement procedures116 IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
117 measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)118 IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
119 measurement procedures – Part 2-4: Tests – Fibre or cable retention120 IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and
121 measurement procedures – Part 2-5: Tests – Torsion122 IEC 61300-2-9, Fibre optic interconnecting devices and passive components – Basic test and
123 measurement procedures – Part 2-9: Tests – Shock124 IEC 61300-2-14, Fibre optic interconnecting devices and passive components – Basic test and
125 measurement procedures – Part 2-14: Tests –High optical power126 IEC 61300-2-17, Fibre optic interconnecting devices and passive components – Basic test and
127 measurement procedures – Part 2-17: Tests – Cold128 IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test and
129 measurement procedures – Part 2-18: Tests – Dry heat---------------------- Page: 7 ----------------------
oSIST prEN IEC 61753-053-02:2022
IEC CDV 61753-053-02/Ed1 © IEC 2021 – 6 – 86B/4532/CDV
130 IEC 61300-2-19, Fibre optic interconnecting devices and passive components – Basic test and
131 measurement procedures – Part 2-19: Tests – Damp heat (steady state)132 IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test and
133 measurement procedures – Part 2-22: Tests – Change of temperature134 IEC 61300-2-42, Fibre optic interconnecting devices and passive components – Basic test and
135 measurement procedures – Part 2-42: Tests – Static side load for connectors136 IEC 61300-2-44, Fibre optic interconnecting devices and passive components – Basic test and
137 measurement procedures – Part 2-44: Tests – Flexing of the strain relief of fibre optic devices
138 IEC 61300-3-2, Fibre optic interconnecting devices and passive components – Basic test and
139 measurement procedures – Part 3-2: Examination and measurements – Polarization dependent
140 loss in a single-mode fibre optic device141 IEC 61300-3-7, Fibre optic interconnecting devices and passive components – Basic test and
142 measurement procedures – Part 3-7: Examinations and measurements – Wavelength
143 dependence of attenuation and return loss of single mode components144 IEC 61300-3-14, Fibre optic interconnecting devices and passive components – Basic test and
145 measurement procedures – Part 3-14: Examinations and measurements – Error and
146 repeata...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.