SIST EN 61753-053-2:2014

Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorised single-mode fibre electrically controlled variable optical attenuator for category C - Controlled environments

This part of IEC 61753 contains the minimum initial test and measurement requirements and
severities which non-connectorized single-mode fibre electrically controlled variable optical
attenuator needs to satisfy in order to be categorised as meeting the requirements of category
C-Controlled environments, as defined in Annex A of IEC 61753-1:2007.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 053-2: Nicht mit Steckverbindern versehene, elektrisch kontrolliert änderbare optische Dämpfungsglieder für Einmodenfasern für die Kategorie C - Kontrollierte Umgebung

Dispositifs d’interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 053-2: Affaiblisseur optique variable commandé électriquement, à fibres unimodales non connectorisé pour la catégorie C - Environnements contrôlés

IEC 61753-053-2:2014 contient les exigences et les sévérités initiales minimales d'essais et de mesures auxquelles un affaiblisseur optique variable commandé électriquement, auxquelles un affaiblisseur optique variable commandé électriquement aux exigences applicables à la catégorie C - Environnements contrôlés, tel que défini dans l'Annexe A de l'IEC 61753-1:2007.
Mots clés: affaiblisseur optique variable commandé électriquement, catégorie C - Environnements contrôlés

Optični spojni elementi in pasivne komponente - Tehnični standard - 053-2. del: Električno krmiljeni spremenljivi optični slabilnik brez konektorjev za enorodna vlakna za kategorijo C - Nadzorovana okolja (IEC 61753-053-2:2014)

Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora električno krmiljeni spremenljivi optični slabilnik brez konektorjev za enorodna vlakna izpolnjevati, da izpolnjuje zahteve kategorije C – nadzorovano okolje, kakor je določeno v Dodatku A standarda IEC 61753-1:2007.

General Information

• Status: Withdrawn
• Publication Date: 12-Oct-2014
• Withdrawal Date: 19-Sep-2023
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-Sep-2023
• Due Date: 13-Oct-2023
• Completion Date: 20-Sep-2023
• Ref Project: EN 61753-053-2:2014 - Fibre optic interconnecting devices and passive components - Performance standard - Part 053-2: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments

Relations

• Replaced By: SIST EN IEC 61753-053-02:2022 - Fibre optic interconnecting devices and passive components - Performance standard - Part 053-02: Non-connectorized single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments (IEC 61753-053-02:2022)
• Effective Date: 13-Sep-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-053-2:2014
01-december-2014
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
(OHNWULþQRNUPLOMHQLVSUHPHQOMLYLRSWLþQLVODELOQLNEUH]NRQHNWRUMHY]DHQRURGQD
YODNQD]DNDWHJRULMR&1DG]RURYDQDRNROMD,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 053-2: Non-connectorised single-mode fibre electrically controlled variable optical
attenuator for category C - Controlled environments
Ta slovenski standard je istoveten z: EN 61753-053-2:2014
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61753-053-2:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61753-053-2:2014

---------------------- Page: 2 ----------------------

SIST EN 61753-053-2:2014


EUROPEAN STANDARD EN 61753-053-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2014
ICS 33.180.20

English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 053-2: Non-connectorized single-
mode fibre, electrically controlled, variable optical attenuator for
category C - Controlled environments
(IEC 61753-053-2:2014)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Norme de performance - Partie 053-2: Bauteile - Betriebsverhalten - Teil 053-2: Nicht mit
Affaiblisseur optique variable commandé électriquement, à Steckverbindern versehene, elektrisch kontrolliert
fibres unimodales non connectorisé pour la catégorie C - änderbare optische Dämpfungsglieder für Einmodenfasern
Environnements contrôlés für die Kategorie C - Kontrollierte Umgebung
(CEI 61753-053-2:2014) (IEC 61753-053-2:2014)
This European Standard was approved by CENELEC on 2014-04-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61753-053-2:2014 E

---------------------- Page: 3 ----------------------

SIST EN 61753-053-2:2014
EN 61753-053-2:2014 - 2 -
Foreword
The text of document 86B/3645/CDV, future edition 1 of IEC 61753-053-2, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-053-2:2014.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2015-01-23
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-04-23
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61753-053-2:2014 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61753-053-2:2014
- 3 - EN 61753-053-2:2014

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references
...