SIST EN 61300-2-24:2002

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application

Identifies weaknesses in a ceramic alignment split sleeve which could lead to early failure of the component.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Meßverfahren -- Teil 2-24: Prüfungen - Sortierprüfung keramischer Zentrierhülsen mit Beanspruchung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 2-24: Essais - Essai de sélection du manchon fendu d'alignement en céramique par l'application de contrainte

Identifie, dans un manchon fendu d'alignement en céramique, les faiblesses susceptibles d'entraîner une défaillance en amont du composant.

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application (IEC 61300-2-24:1999)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2002
• Withdrawal Date: 21-Jul-2010
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 22-Jul-2010
• Due Date: 14-Aug-2010
• Completion Date: 22-Jul-2010
• Ref Project: EN 61300-2-24:2000 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application

Relations

• Revised: SIST EN 61300-2-24:2010 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application (IEC 61300-2-24:2010)
• Effective Date: 05-Jul-2011
• Replaced By: SIST EN 61300-2-24:2010 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application (IEC 61300-2-24:2010)
• Effective Date: 01-Sep-2010
• Replaced By: SIST EN 61300-2-24:2010 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application (IEC 61300-2-24:2010)
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-24:2002
01-september-2002
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment
split sleeve by stress application (IEC 61300-2-24:1999)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 2-24: Tests - Screen testing of ceramic alignment split
sleeve by stress application
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Meßverfahren -- Teil 2-24: Prüfungen - Sortierprüfung keramischer Zentrierhülsen mit
Beanspruchung
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 2-24: Essais - Essai de sélection du
manchon fendu d'alignement en céramique par l'application de contrainte
Ta slovenski standard je istoveten z: EN 61300-2-24:2000
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-24:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-2-24:2002

---------------------- Page: 2 ----------------------

SIST EN 61300-2-24:2002

EUROPEAN STANDARD EN 61300-2-24



NORME EUROPÉENNE



EUROPÄISCHE NORM March 2000

ICS 33.180.20


English version


Fibre optic interconnecting devices and passive components
Basic test and measurement procedures
Part 2-24: Tests - Screen testing of ceramic alignment split sleeve
by stress application
(IEC 61300-2-24:1999)


Dispositifs d'interconnexion et composants Lichtwellenleiter - Verbindungselemente
passifs à fibres optiques Méthodes und passive Bauteile - Grundlegende Prüf-
fondamentales d'essais et und Meßverfahren
de mesures Teil 2-24: Prüfungen - Sortierprüfung
Partie 2-24: Essais - Essai de sélection du keramischer Zentrierhülsen mit
manchon fendu d'alignement en Beanspruchung
céramique par l'application de contrainte (IEC 61300-2-24:1999)
(CEI 61300-2-24:1999)





This European Standard was approved by CENELEC on 2000-01-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2000 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

  Ref. No. EN 61300-2-24:2000 E

---------------------- Page: 3 ----------------------

SIST EN 61300-2-24:2002
Page 2
EN 61300-2-24:2000


Foreword

The text of document 86B/1242/FDIS, future edition 1 of IEC 61300-2-24, prepared by SC 86B,
Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-24
on 2000-01-01.

The following dates were fixed:

– latest date by which the EN has to be implemented
 at national level by publication of an identical
 national standard or by endorsement (dop) 2000-10-01

– latest date by which the national standards conflicting
 with the EN have to be withdrawn (dow) 2003-01-01
__________

Endorsement notice

The text of the International Standard IEC 61300-2-24:1999 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61300-2-24:2002
NORME
CEI
INTERNATIONALE IEC
61300-2-24
INTERNATIONAL
Première édition
STANDARD
First edition
1999-10
Dispositifs d'interconnexion et composants
passifs à fibres optiques –
Méthodes fondamentales d'essais et de mesures –
Partie 2-24:
Essais – Essai de sélection du manchon fendu
d'alignement en céramique par l'application
de contrainte
Fibre optic interconnecting devices and
passive components –
Basic test and measurement procedures –
Part 2-24:
Tests – Screen testing of ceramic alignment split
sleeve by stress application
© IEC 1999 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
N
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST EN 61300-2-24:2002
61300-2-24 © IEC:1999 – 3 –
CONTENTS
Page
FOREWORD . 5
Clause
1 Scope and object . 9
2 General description. 9
3 Apparatus . 9
4 Procedure .13
5 Details to be specified. 15
Annex A (informative) Static fatigue for zirconia alignment sleeve . 17

---------------------- Page: 6 ----------------------

SIST EN 61300-2-24:2002
61300-2-24 © IEC:1999 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-24: Tests – Screen testing of ceramic alignment split sleeve
by stress application
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61300-2-24 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre
optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/1242/FDIS 86B/1277/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.

---------------------- Page: 7 ----------------------

SIST EN 61300-2-24:2002
61300-2-24 © IEC:1999 – 7 –
IEC 61300 consists of the following parts, under the general title Fibre optic interconnecting
devices and passive components – Basic test and measurement procedures:
– Part 1: General and guidance
–Part 2: Tests
– Part 3: Examinations and measurements
The committee has decided that the contents of this publication will remain unchanged until 2003.
At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 8 ----------------------

SIST EN 61300-2-24:2002
61300-2-24 © IEC:1999 – 9 –
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-24: Tests – Screen testing of ceramic alignment split sleeve
by stress application
1 Scope and object
The purpose of this part of IEC 61300 is to identify weaknesses in a ceramic alignment split
sleeve which could lead to early failure of the component.
2 General description
Ceramic alignment sleeves are important components often used in the adaptor of plug-
adaptor-plug optical connector sets. By using the method described, the component is
subjected to a proof stress greater than would be experienced under normal service
conditions. This enables weak products to be screened out.
3 Apparatus
The apparatus and arrangement necessary to perform this screening procedure are shown in
Figure 1. The material needed consists of the following:
a) a reference gauge made of ceramic with a sleeve-holding section, a tapered section and a
stress-applying section. The diameter of each section is dependent on the dimensions of
the product being screened. The length of the sleeve-holding section and the stress-
applying section should be greater than the component being tested;
b) plates A and B, each having a clearance hole in the centre to allow the plate to move a
sample of a ceramic alignment split sleeve on the reference gauge.

---------------------- Page: 9 ----------------------

SIST EN 61300-2-24:2002
61300-2-24 © IEC:1999 – 11 –
∅ E
∅ D
Tapered section
Stress applying section
Sleeve holding section
A
B C
Fixed section
IEC  1487/99
Figure 1a – Reference gauge
H
∅ F
∅ G
IEC  1488/99
Figure 1b – Plate A and plate B
Figure 1 – Apparatus used for screen testing of a ceramic alignment sleeve

---------------------- Page: 10 ----------------------

SIST EN 61300-2-24:2002
61300-2-24 © IEC:1999 – 13 –
Table 1 shows an example of the dimension of the reference gauge and the plate for the
ceramic split sleeve. A recommended dimension of the stress-applying section diameter (E)
is shown for a commonly used ceramic alignment sleeve in Table 2, while the dimension
differs depending on the proof test stress.
Table 1 – Dimension example of the reference gauge and the plate for
the ceramic sleeve
Reference Dimension Notes
mm
A14
B 5
C14
1)
D
...