SIST EN 4612-005:2012

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard

This standard specifies the characteristics of UV laser printable jacket, tin plated copper conductor, electrical cables, Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer XLETFE family for use in the on-board electrical systems of aircraft at operating temperatures between - 65 °C and 135 °C, operating at voltages not exceeding 600 V r.m.s and frequencies not exceeding 2 000 Hz. These cables are suitable for airframe use without additional protection. In case of conflict between this standard and other referenced documents the requirements of this standard shall take precedence.

Luft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen für allgemeine Verwendung - XLETFE Familie - Mit Mantel oder geschirmt und Mantel - Teil 005: Kupfer verzinnt - Betriebstemperaturen zwischen – 65 °C und 135 °C - Doppelt extrudierte Isolierung für externe Verwendung, mit Mantel ohne Schirm - UV-Laser bedruckbar - Produktnorm

Diese Europäische Norm legt die Eigenschaften von elektrischen Leitungen aus der XLETFE-Familie
(quervernetztes Ethylen-Tetrafluorethylen-Co-Polymer) mit UV-Laser bedruckbarem Mantel und verzinntem
Kupferleiter zur Verwendung in elektrischen Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen
zwischen –65 °C und 150 °C, Betriebsspannungen mit einem Effektivwert bis 600 V und Frequenzen von
maximal 2 000 Hz fest. Diese Leitungen sind für die Verlegung in Luftfahrzeugzellen ohne Zusatzschutz
geeignet. Bei Widersprüchen zwischen dieser Norm und anderen zitierten Dokumenten gelten die
Anforderungen dieser Norm

Série aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Gainés ou blindés et gainés - Partie 005: Cuivre étamé - Températures de fonctionnement comprises entre – 65 °C et 135 °C - Fil double isolé pour applications externes, gainé non blindé - Marquable au laser UV - Norme de produit

Aeronavtika - Kabli, električni, za splošne namene, eno- in večžilni - Družina XLETFE - Oplaščeni ali zaslonjeni in oplaščeni - 005. del: Pocinjeni baker - Obratovalne temperature med -65 °C in 135 °C - Dvojno ekstrudirana izolacija za zunanjo uporabo, s plaščem brez zaslona - Potiskljiva z UV-laserjem - Standard za izdelek

Ta standard določa lastnosti plašča, potiskljivega z UV-laserjem, vodnika iz pocinjenega bakra in električnih kablov iz družine kopolimerov, pridobljenih z mrežno polimerizacijo etilena in tetrafluoretilena XLETFE, za uporabo v električnih sistemih na krovu letal pri obratovalnih temperaturah med –65 °C in 135 °C, obratovalnih napetostih, ki ne presegajo efektivne vrednosti 600 V, ter frekvencah, ki ne presegajo 2000 Hz. Ti kabli so primerni za uporabo na ogrodjih letal brez dodatne zaščite. V primeru neskladja med tem standardom in drugimi navedenimi dokumenti imajo prednost določila tega standarda.

General Information

• Status: Published
• Publication Date: 10-Jan-2012
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 29-Dec-2011
• Due Date: 04-Mar-2012
• Completion Date: 11-Jan-2012
• Ref Project: EN 4612-005:2011 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard

Relations

• Replaced By: SIST EN 4612-005:2019 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• Effective Date: 28-Aug-2019
• Revised: SIST EN 4612-005:2019 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications, with jacket without screen - UV laser printable - Product standard
• Effective Date: 29-Sep-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4612-005:2012
01-februar-2012
$HURQDYWLND.DEOLHOHNWULþQL]DVSORãQHQDPHQHHQRLQYHþåLOQL'UXåLQD
;/(7)(2SODãþHQLDOL]DVORQMHQLLQRSODãþHQLGHO3RFLQMHQLEDNHU
2EUDWRYDOQHWHPSHUDWXUHPHGƒ&LQƒ&'YRMQRHNVWUXGLUDQDL]RODFLMD]D
]XQDQMRXSRUDERVSODãþHPEUH]]DVORQD3RWLVNOMLYD]89ODVHUMHP6WDQGDUG]D
L]GHOHN
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly
XLETFE Family jacketed or screened and jacketed - Part 005: Tin plated copper -
Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open
applications, with jacket without screen - UV laser printable - Product standard
Luft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen für allgemeine
Verwendung - XLETFE Familie - Mit Mantel oder geschirmt und Mantel - Teil 005: Kupfer
verzinnt - Betriebstemperaturen zwischen – 65 °C und 135 °C - Doppelt extrudierte
Isolierung für externe Verwendung, mit Mantel ohne Schirm - UV-Laser bedruckbar -
Produktnorm
Série aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs -
Famille XLETFE - Gainés ou blindés et gainés - Partie 005: Cuivre étamé -
Températures de fonctionnement comprises entre – 65 °C et 135 °C - Fil double isolé
pour applications externes, gainé non blindé - Marquable au laser UV - Norme de produit
Ta slovenski standard je istoveten z: EN 4612-005:2011
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 4612-005:2012 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4612-005:2012

---------------------- Page: 2 ----------------------

SIST EN 4612-005:2012


EUROPEAN STANDARD
EN 4612-005

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2011
ICS 49.060
English Version
Aerospace series - Cables, electrical, for general purpose,
single and multicore assembly XLETFE Family jacketed or
screened and jacketed - Part 005: Tin plated copper - Operating
temperatures, between - 65 °C and 135 °C - Dual extruded wall
for open applications, with jacket without screen - UV laser
printable - Product standard
Série aérospatiale - Câbles, électriques, d'usage général, Luft- und Raumfahrt - Ein- und mehradrige elektrische
mono et multiconducteurs - Famille XLETFE - Gainés ou Leitungen für allgemeine Verwendung - XLETFE Familie -
blindés et gainés - Partie 005: Cuivre étamé - Mit Mantel oder geschirmt und Mantel - Teil 005: Kupfer
Températures de fonctionnement comprises entre - 65 °C verzinnt - Betriebstemperaturen zwischen - 65 °C und 135
et 135 °C - Fil double isolé pour applications externes, °C - Doppelt extrudierte Isolierung für externe Verwendung,
gainé non blindé - Marquable au laser UV - Norme de mit Mantel ohne Schirm - UV-Laser bedruckbar -
produit Produktnorm
This European Standard was approved by CEN on 20 August 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4612-005:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4612-005:2012
EN 4612-005:2011 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms, definitions and symbols .4
4 Materials and construction .4
5 Required characteristics .5
6 Quality assurance .8
7 Designation .8
8 Identification and marking .8
9 Packaging, labelling and delivery lengths .8
10 Technical specification .8

2

---------------------- Page: 4 ----------------------

SIST EN 4612-005:2012
EN 4612-005:2011 (E)
Foreword
This document (EN 4612-005:2011) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2012, and conflicting national standards shall be withdrawn at the
latest by April 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sl
...