SIST EN 3375-008:2024
(Main)Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 Ohms - Type KD - Product standard
Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 Ohms - Type KD - Product standard
This document specifies the dimensions, tolerances, required characteristics and the mass of an
AWG 24 shielded quad cable, type KD, intended for high speed (100 Mbit/s) full duplex Ethernet
networks.
Linked to this particular application, the operating temperatures of the cable are between −65 °C and
125 °C.
The cable resists a long-term temperature between −65 °C and +200 °C.
Moreover, cable materials are compatible with 200 °C peak exposure.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The characteristics impedance is (100 ± 15) Ω.
Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 008: Einfach geschirmt - Quad 100 Ohm - Typ KD - Produktnorm
Dieses Dokument legt die Maße, die Grenzabmaße, die erforderlichen EIgenschaften und die Masse eines AWG 24 Quadkabels, einfach geschirmt, Typ KD, für schnelle Duplex-Ethernet-Netze (100 Mbit/s) fest.
Für diesen speziellen Anwendungsfall liegen die Betriebstemperaturen der Leitungen zwischen −65 °C und 125 °C.
Die Leitung hält einer Langzeittemperatur zwischen −65 °C und +200 °C stand.
Darüber hinaus sind Leitungswerkstoffe mit einer Spitzenbelastung von 200 °C kompatibel.
Diese Leitung ist Laser-markierbar, diese Kennzeichnung entspricht den Anforderungen von EN 3838.
Der Wellenwiderstand beträgt (100 ± 15) Ω.
Série aérospatiale - Câbles électriques pour transmission de données numériques - Partie 008 : Simple tresse - Quarte en étoile 100 ohms - Type KD - Norme de produit
Aeronavtika - Električni kabli za digitalni prenos podatkov - 008. del: Enojni oplet - Štirižilni zvezdasti kabel, 100 ohmov (Quad cable) - Tip KD - Standard za proizvod
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3375-008:2024
01-april-2024
Aeronavtika - Električni kabli za digitalni prenos podatkov - 008. del: Enojni oplet -
Štirižilni zvezdasti kabel, 100 ohmov (Quad cable) - Tip KD - Standard za proizvod
Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid
- Star Quad 100 Ohms - Type KD - Product standard
Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 008:
Einfach geschirmt - Quad 100 Ohm - Typ KD - Produktnorm
Série aérospatiale - Câbles électriques pour transmission de données numériques -
Partie 008 : Simple tresse - Quarte en étoile 100 ohms - Type KD - Norme de produit
Ta slovenski standard je istoveten z: EN 3375-008:2024
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3375-008:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3375-008:2024
---------------------- Page: 2 ----------------------
SIST EN 3375-008:2024
EN 3375-008
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2024
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3375-008:2009
English Version
Aerospace series - Cable, electrical, for digital data
transmission - Part 008: Single braid - Star Quad 100 Ohms
- Type KD - Product standard
Série aérospatiale - Câbles électriques pour Luft- und Raumfahrt - Elektrische Leitungen für
transmission de données numériques - Partie 008 : Digitaldatenübertragungen - Teil 008: Einfach
Simple tresse - Quarte en étoile 100 ohms - Type KD - geschirmt - Quad 100 Ohm - Typ KD - Produktnorm
Norme de produit
This European Standard was approved by CEN on 12 June 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3375-008:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3375-008:2024
EN 3375-008:2024 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Required characteristics . 6
4.1 Configuration, dimensions, tolerances and mass. 6
4.2 Material . 7
4.3 General characteristics . 7
5 Tests . 7
6 Quality assurance . 1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.