SIST EN IEC 61753-085-02:2021

Fibre optic interconnecting devices and passive components - Performance standard - Part 085-02: Non-connectorized single-mode pigtailed CWDM devices for category C - Indoor controlled environment (IEC 61753-085-02:2021)

This part of IEC 61753 contains the minimum initial test and measurement requirements and
severities which a fibre-optic pigtailed coarse wavelength division multiplexing (CWDM) device
satisfies in order to be categorised as meeting the requirements of category C (indoor controlled
environment), as defined in Annex A of IEC 61753-1:2018. CWDM is defined in IEC 62074‑1.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 085-2: Nicht mit Steckern versehene Einmoden-CWDM-Bauteile mit Anschlussfaser für die Kategorie C - Kontrollierte Umgebung (IEC 61753-085-02:2021)

Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 085-2: Dispositifs CWDM à fibre amorce unimodale non connectorisés de catégorie C - Environnement contrôlé (IEC 61753-085-02:2021)

IEC 61753-085-02:2021 contient les exigences minimales d’essais initiaux et de mesure ainsi que les sévérités auxquelles satisfait un multiplexeur par répartition en longueurs d’onde grossière (CWDM – coarse wavelength division multiplexing) fibronique à fibre amorce , afin qu'il soit jugé conforme aux exigences de la catégorie C (environnement intérieur contrôlé), comme cela est défini à l’Annexe A de l’IEC 61753-1:2018. Le CWDM est défini dans l’IEC 62074‑1.
Cette première édition annule et remplace l’IEC 61753-085-2 parue en 2008. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques spécifiques suivantes par rapport à l’IEC 61753-085-2: modification des conditions d’essai pour les harmoniser avec l’IEC 61753‑1:2018.

Optični spojni elementi in pasivne komponente - Izvedbeni standard - 085-2. del: Enorodovni elementi CWDM z repki, brez konektorjev, za kategorijo C - Notranje nadzorovano okolje (IEC 61753-085-02:2021)

General Information

• Status: Published
• Publication Date: 07-Sep-2021
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Sep-2021
• Due Date: 08-Nov-2021
• Completion Date: 08-Sep-2021
• Ref Project: EN IEC 61753-085-02:2021 - Fibre optic interconnecting devices and passive components - Performance standard - Part 085-02: Non-connectorized single-mode pigtailed CWDM devices for category C - Indoor controlled environment

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61753-085-02:2021
01-november-2021
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 085-2. del:
Enorodovni elementi CWDM z repki, brez konektorjev, za kategorijo C - Notranje
nadzorovano okolje (IEC 61753-085-02:2021)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 085-02: Non-connectorized single-mode pigtailed CWDM devices for category C -
Indoor controlled environment (IEC 61753-085-02:2021)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
085-2: Nicht mit Steckern versehene Einmoden-CWDM-Bauteile mit Anschlussfaser für
die Kategorie C - Kontrollierte Umgebung (IEC 61753-085-02:2021)
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants
passifs à fibres optiques - Partie 085-2: Dispositifs CWDM à fibre amorce unimodale non
connectorisés de catégorie C - Environnement contrôlé (IEC 61753-085-02:2021)
Ta slovenski standard je istoveten z: EN IEC 61753-085-02:2021
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-085-02:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61753-085-02:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61753-085-02:2021


EUROPEAN STANDARD EN IEC 61753-085-02

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2021
ICS 33.180.10

English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 085-02: Non-connectorized single-
mode pigtailed CWDM devices for category C - Indoor controlled
environment
(IEC 61753-085-02:2021)
Norme de qualité de fonctionnement des dispositifs Lichtwellenleiter - Verbindungselemente und passive
d'interconnexion et composants passifs à fibres optiques - Bauteile - Betriebsverhalten - Teil 085-2: Nicht mit Steckern
Partie 085-2: Dispositifs CWDM à fibre amorce unimodale versehene Einmoden-CWDM-Bauteile mit Anschlussfaser
non connectorisés de catégorie C - Environnement contrôlé für die Kategorie C - Kontrollierte Umgebung
(IEC 61753-085-02:2021) (IEC 61753-085-02:2021)
This European Standard was approved by CENELEC on 2021-08-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61753-085-02:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61753-085-02:2021
EN IEC 61753-085-02:2021 (E)
European foreword
The text of document 86B/4319/CDV, future edition 1 of IEC 61753-085-02, prepared by SC 86B
“Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics” was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 61753-085-02:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–05–11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–08–11
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61753-085-02:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61300 (series) NOTE Harmonized as EN 61300 (series)
2

---------------------- Page: 4 ----------------------
SIST EN IEC 61753-085-02:2021
EN IEC 61753-085-02:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - Part 2–50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-2-50 - Optical fibre cables - Part 2–50: Indoor EN IEC 60794-2-50 -
optical fibre cables - Family specification for
simplex and duplex cables for use in
terminated cable assemblies
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures - Part 2–1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2–4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures - Part 2–5: Tests
- Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures - Part 2–9: Tests
- Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN IEC 61300-2-14 -
passive components - Basic test and
measurement procedures - Part 2–14:
Tests - High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2–17:
Tests - Cold
3

---------------------- Page: 5 ----------------------
SIST EN IEC 61753-085-02:2021
EN IEC 61753-085-02:2021 (E)
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2–18:
Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2–19:
Tests - Damp heat (steady-state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2–22:
Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures - Part 2–42:
Tests - Static side load for strain relief
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures - Part 2–44:
Tests - Flexing of the strain relief of fibre
optic devices
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures - Part 3–2:
Examination and measurements -
Polarization dependent loss in a single-
mode fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3–6:
Examinations and measurements - Return
loss
IEC 61300-3-7 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 3–7:
Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components
IEC 61300-3-29 - Fibre optic interconnecting devices and EN 61300-3-29 -
passive components - Basic test and
measurement procedures - Part 3–29:
Examinations and measurements - Spectral
transfer characteristics of DWDM devices
IEC 61753-1 2018 Fibre optic interconnecting devices and EN IEC 61753-1 2018
passive components - Performance
standard - Part 1: General and guidance
IEC 62074-1 - Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices - Part 1: Generic specification
IEC/TS 62627-09 - Fibre optic interconnecting devices and - -
passive components - Vocabulary for
passive optical devices

4

---------------------- Page: 6 ----------------------
SIST EN IEC 61753-085-02:2021



IEC 61753-085-02

®


Edition 1.0 2021-07




INTERNATIONAL



STANDARD



















Fibre optic interconnecting devices and passive components – Performance

standard –

Part 085-02: Non-connectorized single-mode pigtailed CWDM devices for

category C – Indoor controlled environment
























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 33.180.10 ISBN 978-2-8322-9985-2




  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------
SIST EN IEC 61753-085-02:2021
– 2 – IEC 61753-085-02:2021 © IEC 2021

CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test . 6
5 Test report . 7
6 Performance requirements. 7
6.1 Reference components . 7
6.2 Dimensions . 7
6.3 Sample size . 7
6.4 Test details and requirements . 7
Annex A (normative) Sample size . 13
Bibliography . 14

Table 1 – Single-mode spectral bands . 7
Table 2 – Test details and requirements for category C . 8
Table A.1 – Sample size and grouping of tests. 13

---------------------- Page: 8 ----------------------
SIST EN IEC 61753-085-02:2021
IEC 61753-085-02:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –

Part 085-02: Non-connectorized single-mode pigtailed CWDM
devices for category C – Indoor controlled environment

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 61753-085-02 has been prepared by subcommittee 86B: Fibre optic interconnecting
devices and passive components, of IEC technical committee 86: Fibre optics. It is an
International Standard.
This first edition cancels and replaces IEC 61753-085-2 published in 2008. This edition
constitutes a technical revision.
This edition includes the following specific technical change with respect to IEC 61753-085-2:
change of test conditions harmonizing with IEC 61753-1:2018.

---------------------- Page: 9 ----------------------
SIST EN IEC 61753-085-02:2021
– 4 – IEC 61753-085-02:2021 © IEC 2021
The text of this International Standard is based on the following documents:
Draft Report on voting
86B/4319/CDV 86B/4377B/RVC

Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 61753 series, published under the general title Fibre optic
interconnecting devices and passive components – Performance standard, can be found on the
IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------
SIST EN IEC 61753-085-02:2021
IEC 61753-085-02:2021 © IEC 2021 – 5 –
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –

Part 085-02: Non-connectorized single-mode pigtailed CWDM
devices for category C – Indoor controlled environment



1 Scope
This part of IEC 61753 contains the minimum initial test and measurement requirements and
severities which a fibre-optic pigtailed coarse wavelength division multiplexing (CWDM) device
satisfies in order to be categorised as meeting the requirements of category C (indoor controlled
environment), as defined in Annex A of IEC 61753-1:2018. CWDM is defined in IEC 62074‑1.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for
class B single-mode fibres
IEC 60794-2-50, Optical fibre cables – Part 2-50: Indoor cables – Family specification for
simplex and duplex cables for use in terminated cable assemblies
IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-4: Tests – Fibre or cable retention
IEC 61300-
...