SIST EN 3155-082:2019

Aerospace series - Electrical contacts used in elements of connection - Part 082: Contacts, electrical, female, type A, crimp, class S - Product standard

This European Standard specifies the required characteristics, tests and tooling applicable to female
electrical contacts 082, type A, crimp, class S used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-008 and EN 3155-070.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 082: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 082 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 082. del: Kontakti, električni, ženski, tip A, nagubani, razred S - Standard za proizvod

Ta evropski standard določa zahtevane značilnosti, preskuse in orodja za ženske električne kontakte velikosti 082, tipa A, nagubane, razreda S, ki se uporabljajo v veznih elementih v skladu s standardom EN 3155-002.
Uporabljati ga je treba skupaj s standardom EN 3155-001.
Povezani moški kontakti so določeni v standardih EN 3155-008 in EN 3155-070.

General Information

• Status: Published
• Publication Date: 01-Jul-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 20-Jun-2019
• Due Date: 25-Aug-2019
• Completion Date: 02-Jul-2019
• Ref Project: EN 3155-082:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 082: Contacts, electrical, female, type A, crimp, class S - Product standard

Relations

• Revised: SIST EN 3155-082:2016 - Aerospace series - Electrical contacts used in elements of connection - Part 082: Contacts, electrical, female, type A, crimp, class S - Product standard
• Effective Date: 02-Nov-2016
• Replaces: SIST EN 3155-082:2016 - Aerospace series - Electrical contacts used in elements of connection - Part 082: Contacts, electrical, female, type A, crimp, class S - Product standard
• Effective Date: 19-Jun-2019
• Replaces: SIST EN 3155-082:2016 - Aerospace series - Electrical contacts used in elements of connection - Part 082: Contacts, electrical, female, type A, crimp, class S - Product standard
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3155-082:2019
01-september-2019
Nadomešča:
SIST EN 3155-082:2016
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 082. del:
Kontakti, električni, ženski, tip A, nagubani, razred S - Standard za proizvod
Aerospace series - Electrical contacts used in elements of connection - Part 082:
Contacts, electrical, female, type A, crimp, class S - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 082: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
082 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
Ta slovenski standard je istoveten z: EN 3155-082:2019
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3155-082:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3155-082:2019

---------------------- Page: 2 ----------------------

SIST EN 3155-082:2019


EN 3155-082
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3155-082:2015
English Version

Aerospace series - Electrical contacts used in elements of
connection - Part 082: Contacts, electrical, female, type A,
crimp, class S - Product standard
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 082 : Contacts Verwendung in Verbindungselementen - Teil 082:
électriques, femelles, type A, à sertir, classe S - Norme Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse
de produit S - Produktnorm
This European Standard was approved by CEN on 2 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-082:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3155-082:2019
EN 3155-082:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
5 Designation . 14
6 Marking . 14
7 Technical specification . 14

2

---------------------- Page: 4 ----------------------

SIST EN 3155-082:2019
EN 3155-082:2019 (E)
European foreword
This document (EN 3155-082:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards shall
be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3155-082:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 3155-082:2019
EN 3155-082:2019 (E)
1 Scope
This European Standard specifies the required characteristics, tests and tooling applicable to female
electrical contacts 082, type A, crimp, class S used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-008 and EN 3155-070.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard
EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test methods
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection —
Part 001: Technical specification
EN 3155-002, Aerospace series — Electrical contacts used in elements of connection —
Part 002: List and utilization of contacts
EN 3155-008, Aerospace series — Electrical contacts used in elements of connection —
Part 008: Contacts, electrical, male, type A, crimp, class S — Product standard
EN 3155-070, Aerospace series — Electrical contacts used in elements of connection —
Part 070: Contacts, electrical, male, type A, crimp, class S — Product standard
EN 4165-001, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 001: Technical specification
EN 4434, Aerospace series — Copper or copper alloy lightweight conductors for electrical cables —
Product standard (Normal and tight tolerances)
1)
ISO 8843, Aircraft — Crimp-removable contacts for electrical connectors — Identification system
2)
SAE-AS22520, Crimping tools, wire termination, general specification for
2)
SAE-AS81969, Installing and removal tools, connector electrical contact, general specification for


1) Published by: International Organization for Standardization (ISO), http://www.iso.ch/
2) Published by: National (US) Society of Automotive Engineers (SAE), http://www.sae.org/
4

---------------------- Page: 6 ----------------------

SIST EN 3155-082:2019
EN 3155-082:2019 (E)
3 Terms
...