SIST EN 13763-7:2004

Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures

This European Standard specifies a method for determining the ability of detonator leading wires/shock tubes, and their connections into the crimp/closure or sealing arrangement, to withstand a pullout when subjected to a pulling force.

Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 7: Bestimmung der mechanischen Festigkeit von Zünderdrähten, Zündschläuchen, Verbindungen, Anwürgung und Verschluss

Explosifs a usage civil - Détonateurs et relais - Partie 7: Déterminationde la force mécanique des fils d'amorçage, tubes a transmission d'onde de choc, liaisons, sertissags et fermetures

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 7. del: Ugotavljanje mehanske trdnosti vodnikov, detonacijskih cevk, konektorjev, stisnjenih spojev in stisnitev

General Information

• Status: Published
• Publication Date: 31-Dec-2003
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: IEKS - Explosives
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2004
• Due Date: 01-Jan-2004
• Completion Date: 01-Jan-2004
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: TP072 - Pravilnik o tehničnih in varnostnih zahtevah, obrazcih ter evidencah za eksplozive in pirotehnične izdelke
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: EN 13763-7:2003 - Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures

Relations

• Revises: oSIST prEN 13763-7:2021 - Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures
• Effective Date: 18-Jan-2023
• Revises: oSIST prEN 13763-7:2021 - Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures
• Effective Date: 19-Jan-2023
• Revised: oSIST prEN 13763-7:2021 - Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures
• Effective Date: 01-Apr-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 7. del: Ugotavljanje mehanske trdnosti vodnikov, detonacijskih cevk, konektorjev, stisnjenih spojev in stisnitevExplosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 7: Bestimmung der mechanischen Festigkeit von Zünderdrähten, Zündschläuchen, Verbindungen, Anwürgung und VerschlussExplosifs a usage civil - Détonateurs et relais - Partie 7: Déterminationde la force mécanique des fils d'amorçage, tubes a transmission d'onde de choc, liaisons, sertissags et fermeturesExplosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-7:2003SIST EN 13763-7:2004en01-januar-2004SIST EN 13763-7:2004SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-7November 2003ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 7:Determination of the mechanical strength of leading wires,shock tubes, connections, crimps and closuresExplosifs à usage civil - Détonateurs et relais - Partie 7:Déterminationde la force mécanique des fils d'amorçage,tubes à transmission d'onde de choc, liaisons, sertissags etfermeturesExplosivstoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 7: Bestimmung dermechanischen Festigkeit von Zünderdrähten,Zündschläuchen, Verbindungen, Anwürgung undVerschlussThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-7:2003 E



EN 13763-7:2003 (E)2ContentspageForeword.3Introduction.51Scope.52Normative references.53Terms and definitions.54Apparatus.55Test pieces.66Procedure.77Test report.8Annex A (informative)
Range of applicability of the test method.9Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.10



EN 13763-7:2003 (E)3ForewordThis document (EN 13763-7:2003) has been prepared by Technical Committee CEN/TC 321 "Explosives for civiluses", the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2004, and conflicting national standards shall be withdrawn at the latest byMay 2004.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For the relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard is one of a series of standards with the generic title Explosives for civil uses – Detonatorsand relays. The other parts of this series are listed below:prEN 13763-1Part 1: RequirementsEN 13763-2Part 2: Determination of thermal stabilityEN 13763-3Part 3: Determination of sensitiveness to impactEN 13763-4Part 4: Determination of resistance to abrasion of leading wires and shock tubesEN 13763-5Part 5: Determination of resistance to cutting damage of leading wires and shock tubesEN 13763-6Part 6: Determination of resistance to cracking at low temperatures of leading wiresEN 13763-8Part 8: Determination of resistance to vibration of plain detonatorsEN 13763-9Part 9: Determination of resistance to bending of detonatorsEN 13763-11Part 11: Determination of resistance to damage by dropping of detonators and relaysEN 13763-12Part 12: Determination of resistance to hydrostatic pressureprEN 13763-13Part 13: Determination of resistance of electric detonators against electrostatic dischargeprEN 13763-15Part 15: Determination of equivalent initiating capabilityprEN 13763-16Part 16: Determination of delay accuracyprEN 13763-17Part 17: Determination of no-fire current of electric detonatorsprEN 13763-18Part 18: Determination of series firing current of electric detonatorsprEN 13763-19Part 19: Determination of firing impulse of electric detonatorsEN 13763-20Part 20: Determination of total electrical resistance of electric detonatorsprEN 13763-21Part 21: Determination of flash-over voltage of electric detonatorsprEN 13763-22Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leadingwires



EN 13763-7:2003 (E)4EN 13763-23Part 23: Determination of the shockwave velocity of shock tubesEN 13763-24Part 24: Determination of the electrical non-conductivity of shock tubesprEN 13763-25Part 25: Determination of transfer capability of surface connectors and coupling accessoriesprEN 13763-26Part 26: Defin
...