iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50267-1:1999

(Main)

Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus

Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus

EN 50267-1 specifies apparatus suitable for use with procedures for the quantitative determination of gases, especially acidic and corrosive gases, evolved when non-metallic materials taken from cables are subject to combustion

Allgemeine Prüfverfahren für das Verhalten von Kabeln und isolierten Leitungen im Brandfall - Prüfung der bei der Verbrennung der Werkstoffe von Kabeln und isolierten Leitungen entstehenden Gase - Teil 1: Prüfgerät

Méthodes d'essai communes aux câbles soumis au feu - Essais sur les gaz émis lors de la combustion d'un matériau prélevé sur un câble - Partie 1: Appareillage d'essai

Prescrit une méthode pour la détermination de la quantité de gaz acide halogéné, autre que l'acide fluorhydrique, émis durant la combustion de mélanges à base de polymère halogénés et de mélanges contenant des additifs halogénés prélevés sur un câble. L'utilisation de cete méthode n'est pas recommandée lorsque la quantité d'acide halogéné émis est inférieure à 5 mg/g d'échantillon prélevé. A le statut d'une publication fondamentale de sécurité conformément au Guide 104.

Splošne metode za preskušanje kablov v požarnih razmerah - Ugotavljanje nastajanja plinov pri gorenju kabelskih materialov - 1. del: Aparati

General Information

Status
Withdrawn
Publication Date
30-Jun-1999
Withdrawal Date
16-Jan-2017
ICS
13.220.40 - Ignitability and burning behaviour of materials and products
29.060.20 - Cables
Technical Committee
IEKA - Electric cables
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Jan-2017
Due Date
09-Feb-2017
Completion Date
17-Jan-2017
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 50267-1:1998 - Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus

Relations

Revised
SIST EN 60754-2:2014 - Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
Effective Date
23-Jul-2014
Revised
SIST EN 60754-1:2014 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
Effective Date
23-Jul-2014
Revises
SIST EN 60754-1:2014 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
Effective Date
07-Jun-2022
Revises
SIST EN 60754-2:2014 - Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
Effective Date
07-Jun-2022
Official Journal Project Relation
SIST HD 602 S1:1998 - Test on gases evolved during combustion of materials from cables - Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity
Effective Date
02-Mar-2010
Replaces
SIST HD 602 S1:1998 - Test on gases evolved during combustion of materials from cables - Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity
Effective Date
28-Jan-2023
Replaced By
SIST EN 60754-1:2014 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
Effective Date
28-Jan-2023
Replaced By
SIST EN 60754-2:2014 - Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
Effective Date
28-Jan-2023
Replaces
SIST HD 602 S1:1998 - Test on gases evolved during combustion of materials from cables - Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity
Effective Date
07-Jun-2022

Buy Standard

EN 50267-1:1999EN 50267-1:1999
PreviousNext
Standard
EN 50267-1:1999
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50267-1:1999
01-julij-1999
1DGRPHãþD
SIST HD 602 S1:1998
Splošne metode za preskušanje kablov v požarnih razmerah - Ugotavljanje
nastajanja plinov pri gorenju kabelskih materialov - 1. del: Aparati
Common test methods for cables under fire conditions - Tests on gases evolved during
combustion of materials from cables - Part 1: Apparatus
Allgemeine Prüfverfahren für das Verhalten von Kabeln und isolierten Leitungen im
Brandfall - Prüfung der bei der Verbrennung der Werkstoffe von Kabeln und isolierten
Leitungen entstehenden Gase - Teil 1: Prüfge
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50576:2023(Main)
Electric cables - Extended application of test results for reaction to fire
EN 50576:2022

This EN gives the procedure and rules for extended application of results of tests carried out according to the test methods described in EN 50399, EN 60332 1 2 and EN 61034 2.
The EXAP rules described apply to EN 50399 test results used for classification in classes B2ca, Cca and Dca, additional smoke production classes s1, s2 and s3 and flaming droplets/particles, to EN 60332 1 2 test results used for classification in classes B2ca, Cca, Dca and Eca and to EN 61034 2 test results used for classification in classes s1a and s1b.
No EXAP procedure and rules have been developed in respect of the results of tests carried out
according to the test method described in EN 60754–2. As the parameters (pH and conductivity) for each cable in a family are determined based upon calculation using material test results, this is considered as a matter of direct application. Material test results taken from any one sample of finished cable from a family are sufficient to calculate the parameters for each cable in the family.
Cables of diameter 5,0 mm and less should be tested as bundles according to EN 50399. Bundled cables are not included in the EXAP rules applying to EN 50399 test results.
The rules apply to circular and non-circular cables provided that they fall within the scope of the relevant test method.
A specific EXAP rule has been developed for the most common generic power cable families,  optical fibre cables and copper communication cables (CCC). A general EXAP rule has been developed for any power cable families. The general EXAP rule is not applicable to communication or optical fibre cables.
NOTE 1   Multicore power cables are sometimes referred to as control cables with a rated voltage but for the purposes of this standard are considered as power cables. For multipair, multitriple and multiquad control cables either the general EXAP rule for power cables or the specific EXAP rule for copper communication cables can be applied.
The general EXAP rule may be applied in the case of hybrid cables provided that the conditions of 6.1 are fulfilled.
The use of the specific EXAP rule gives benefit in the lower number of cables to be tested for a range of cable constructions (product family).
An EXAP is only possible when cables belong to a defined family as defined in this standard.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50399:2022(Main)
Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
EN 50399:2022

EN 50399 specifies the apparatus and methods of test for the assessment of vertical flame spread, heat release, smoke production and occurrence of flaming droplets/particles of vertically-mounted electric cables under defined conditions.
NOTE   For the purpose of this standard, the term “electric cable” covers all power, control and communication cables, including optical fibre cables and hybrid cables used for the conveyance of energy and/or signals.
EN 50399 details the apparatus for the fire propagation testing and the arrangement and calibration of the instrumentation to be installed in order to measure the heat release and the smoke production during the test. The combustion gases are collected in a hood above the test chamber and conveyed through an exhaust system, which allows the measurement of heat release rate and smoke production. Test procedures to be used for type approval testing for classification of cables in classes [2, 6] B1ca, B2ca, Cca and Dca are given. Cable installation on the test ladder and the volume of air passing through the chamber are in accordance with the Commission Decision 2006/751/EC [5], which is reflected in the requirements of this standard.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60332-1-2:2005/A12:2021(Amendment)
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
EN 60332-1-2:2004/A12:2020

This standard specifies the procedure for testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60332-3-10:2018/A11:2021(Amendment)
Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
EN IEC 60332-3-10:2018/A11:2020

EN 60332-3-10:2018 details the apparatus and its arrangement and calibration for methods of test for the assessment of vertical flame spread of vertically mounted bunched wires or cables, electrical or optical, under defined conditions.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50306-4:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4: Multicore and multipair screened or not screened sheathed cables
EN 50306-4:2020

EN 50306-4 specifies requirements for, and constructions and dimensions of, multicore and multipair cables rated voltage Uo/U: 300/500 V, of the following types:
- unscreened, sheathed for either exposed or protected wiring, 0,5 mm2 to 2,5 mm2, number of cores from 2 to 48;
- screened, sheathed for either exposed or protected wiring, 0,5 mm2 to 2,5 mm2, number of cores from 2 to 8;
- unscreened, sheathed for either exposed or protected wiring, 0,5 mm2 to 1,5 mm2, number of screened pairs of cores from 2 to 7;
- screened, sheathed for either exposed or protected wiring, 0,5 mm2 to 1,5 mm2, number of unscreened pairs of cores from 2 to 7.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50306-1:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1: General requirements
EN 50306-1:2020

EN 50306 1 specifies the general requirements applicable to the cables given EN 50306 2, EN 50306 3 and EN 50306 4. It includes the detailed requirements for S2 sheathing materials and other components called up in the separate Parts. In particular EN 50306 1 specifies those requirements relating to fire safety which enable the cables to satisfy Hazard Level3 of EN 45545-1 and -2.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50305:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Test methods
EN 50305:2020

This standard specifies special test methods applicable to cables, and their constituent insulating and sheathing materials, for use in railway rolling stock.  Such cables are specified in the various parts of EN 50264, EN 50306 and EN 50382.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50306-2:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2: Single core cables
EN 50306-2:2020

EN 50306-2 specifies requirements for, and constructions and dimensions of, single core cables, rated voltage Uo / U= 300 /300 V, of the following type:  Unscreened, 0,5 mm2 to 2,5 mm2 single core

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50306-3:2020(Main)
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3: Single core and multicore cables screened and thin wall sheathed
EN 50306-3:2020

EN 50306-3 specifies requirements for, and constructions and dimensions of, multicore cables, rated voltage Uo/U=300/500 V, of the following type: Screened, 0,5 mm2 to 2,5 mm2, number of cores from 1 to 8. All cables have stranded tinned copper conductors, and thin wall thickness, halogen-free, insulation and sheath. They are for use in railway rolling stock as fixed wiring, or wiring where limited flexing in operation is encountered.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60754-1:2014/A1:2020(Amendment)
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content (IEC 60754-1:2011/A1:2019)
EN 60754-1:2014/A1:2020

2019-02-01 PeC: removed from citation under the LVD, TC confirmed it is a test method standard

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day