Aerospace series - Shank nut, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated, for 30° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C

This document specifies the characteristics of self-locking shank nuts in NI-P101HT, silver plated, for use in 30° cone holes, for aerospace applications.
Classification: 1 210 MPa /730 °C .

Luft- und Raumfahrt - Einnietmutter, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy), versilbert, für 30° Aufweitung - Klasse: 1 210 MPa (bei Raumtemperatur) / 730 °C

Série aérospatiale - Écrous à sertir, à freinage interne, en alliage résistant à chaud à base de nickel NI-P101HT (Waspaloy), argentés, pour sertissage 30° - Classification: 1 210 MPa (à température ambiante) / 730 °C

Le présent document spécifie les caractéristiques des écrous à sertir, à freinage interne, en NI-P101HT, argentés, pour utilisation dans des trous coniques de 30°, pour les applications aérospatiales.
Classification : 1 210 MPa /730 °C .
Le présent document spécifie les caractéristiques des écrous à sertir, à freinage interne, en NI-P101HT, argentés, pour utilisation dans des trous coniques de 30°, pour les applications aérospatiales.
Classification : 1 210 MPa /730 °C .

Aeronavtika - Zakovičena matica, samovarovalna, iz toplotnoodporne zlitine na nikljevi osnovi NI-P101HT (Waspaloy), posrebrena, za odprtine 30° - Klasifikacija: 1210 MPa (pri okoljski temperaturi)/730 °C

General Information

Status
Not Published
Public Enquiry End Date
12-Jun-2023
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
06-Apr-2023
Due Date
24-Aug-2023
Completion Date
13-Jun-2023

Relations

Buy Standard

Draft
prEN 3672:2023
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3672:2023
01-maj-2023
Aeronavtika - Zakovičena matica, samovarovalna, iz toplotnoodporne zlitine na
nikljevi osnovi NI-P101HT (Waspaloy), posrebrena, za odprtine 30° - Klasifikacija:
1210 MPa (pri okoljski temperaturi)/730 °C
Aerospace series - Shank nut, self-locking, in heat resisting nickel base alloy NI-P101HT
(Waspaloy), silver plated, for 30° swage - Classification: 1 210 MPa (at ambient
temperature) / 730 °C
Luft- und Raumfahrt - Einnietmutter, selbstsichernd, aus hochwarmfester
Nickelbasislegierung NI-P101HT (Waspaloy), versilbert, für 30° Aufweitung - Klasse: 1
210 MPa (bei Raumtemperatur) / 730 °C
Série aérospatiale - Écrous à sertir, à freinage interne, en alliage résistant à chaud à
base de nickel NI-P101HT (Waspaloy), argentés, pour sertissage 30° - Classification: 1
210 MPa (à température ambiante) / 730 °C
Ta slovenski standard je istoveten z: prEN 3672
ICS:
49.030.30 Matice Nuts
oSIST prEN 3672:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3672:2023

---------------------- Page: 2 ----------------------
oSIST prEN 3672:2023


DRAFT
EUROPEAN STANDARD
prEN 3672
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2023
ICS 49.030.30 Will supersede EN 3672:2016
English Version

Aerospace series - Shank nut, self-locking, in heat resisting
nickel base alloy NI-P101HT (Waspaloy), silver plated, for
30° swage - Classification: 1 210 MPa (at ambient
temperature) / 730 °C
Série aérospatiale - Écrous à sertir, à freinage interne, Luft- und Raumfahrt - Einnietmutter, selbstsichernd,
en alliage résistant à chaud à base de nickel NI-P101HT aus hochwarmfester Nickelbasislegierung NI-P101HT
(Waspaloy), argentés, pour sertissage 30° - (Waspaloy), versilbert, für 30° Aufweitung - Klasse: 1
Classification: 1 210 MPa (à température ambiante) / 210 MPa (bei Raumtemperatur) / 730 °C
730 °C
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3672:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3672:2023
prEN 3672:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
4.1 Configuration, dimensions, tolerances, masses . 5
4.2 Material . 5
4.3 Surface treatment . 5
5 Designation . 7
6 Marking . 7
7 Technical specification . 8

2
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.