SIST EN 3228:2022
(Main)Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
This document specifies the characteristics of plain hexagonal nuts, reduced height, normal across flats,
in steel, cadmium plated, for aerospace applications.
Classification: 900 MPa/235 °C1.
Luft- und Raumfahrt - Flache Sechskantmuttern mit reduzierter Höhe, normale Schlüsselweite, aus Stahl, verkadmet - Klasse: 900 MPa (bei Raumtemperatur)/235 °C
No Scope available
Série aérospatiale - Écrous hexagonaux ordinaires, hauteur réduite, surplats normaux, en acier, cadmiés - Classification : 900 MPa (à température ambiante)/235 °C
No Scope available
Aeronavtika - Matice, šestrobe, drsne, z normalnim zevom ključa, iz jekla, kadmirane - Klasifikacija: 900 MPa (pri temperaturi okolice)/235 °C
Ta dokument določa značilnosti drsnih kadmiranih šestrobih matic iz jekla z normalnim zevom ključa za uporabo v aeronavtiki. Klasifikacija: 900 MPa/235 °C.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3228:2022
01-maj-2022
Nadomešča:
SIST EN 3228:2010
Aeronavtika - Matice, šestrobe, drsne, z normalnim zevom ključa, iz jekla,
kadmirane - Klasifikacija: 900 MPa (pri temperaturi okolice)/235 °C
Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel,
cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
Luft- und Raumfahrt - Flache Sechskantmuttern mit reduzierter Höhe, normale
Schlüsselweite, aus Stahl, verkadmet - Klasse: 900 MPa (bei Raumtemperatur)/235 °C
Série aérospatiale - Écrous hexagonaux ordinaires, hauteur réduite, surplats normaux,
en acier, cadmiés - Classification : 900 MPa (à température ambiante)/235 °C
Ta slovenski standard je istoveten z: EN 3228:2022
ICS:
21.060.20 Matice Nuts
49.025.10 Jekla Steels
49.030.30 Matice Nuts
SIST EN 3228:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3228:2022
---------------------- Page: 2 ----------------------
SIST EN 3228:2022
EN 3228
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2022
EUROPÄISCHE NORM
ICS 49.030.30 Supersedes EN 3228:2010
English Version
Aerospace series - Nuts, hexagonal, plain, reduced height,
normal across flats, in steel, cadmium plated -
Classification: 900 MPa (at ambient temperature)/235 °C
Série aérospatiale - Écrous hexagonaux ordinaires, Luft- und Raumfahrt - Flache Sechskantmuttern mit
hauteur réduite, surplats normaux, en acier, cadmiés - reduzierter Höhe, normale Schlüsselweite, aus Stahl,
Classification : 900 MPa (à température ambiante)/235 verkadmet - Klasse: 900 MPa (bei
°C Raumtemperatur)/235 °C
This European Standard was approved by CEN on 17 January 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3228:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3228:2022
EN 3228:2022 (E)
Contents Page
European Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
4.1 Configuration — Dimensions — Masses . 5
4.2 Materials . 8
4.3 Surface treatment . 8
5 Designation. 8
6 Marking . 8
7 Technical specification . 9
8 Quality management system . 9
Bibliography . 10
2
---------------------- Page: 4 ----------------------
SIST EN 3228:2022
EN 3228:2022 (E)
European Foreword
This document (EN 3228:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard
has received the approval of the National Associations and the Official Services of the member
countries of ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2022 and conflicting national standards
shall be withdrawn at the latest by September 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey an
...
SLOVENSKI STANDARD
oSIST prEN 3228:2020
01-november-2020
Aeronavtika - Matice, šestrobe, drsne, z normalnim zevom ključa, iz jekla,
kadmirane - Klasifikacija: 900 MPa (pri temperaturi okolice)/235 °C
Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel,
cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
Luft- und Raumfahrt - Flache Sechskantmutter mit normaler Schlüsselweite, aus Stahl,
verkadmet - Klasse: 900 MPa (bei Raumtemperatur)/235 °C
Série aérospatiale - Écrous hexagonaux ordinaires hauteur réduite, surplats normaux, en
acier, cadmiés - Classification : 900 MPa (à température ambiante)/235 °C
Ta slovenski standard je istoveten z: prEN 3228
ICS:
49.025.10 Jekla Steels
49.030.30 Matice Nuts
oSIST prEN 3228:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 3228:2020
---------------------- Page: 2 ----------------------
oSIST prEN 3228:2020
DRAFT
EUROPEAN STANDARD
prEN 3228
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 49.030.30 Will supersede EN 3238:2010
English Version
Aerospace series - Nuts, hexagonal, plain, reduced height,
normal across flats, in steel, cadmium plated -
Classification: 900 MPa (at ambient temperature)/235 °C
Série aérospatiale - Écrous hexagonaux ordinaires Luft- und Raumfahrt - Flache Sechskantmutter mit
hauteur réduite, surplats normaux, en acier, cadmiés - normaler Schlüsselweite, aus Stahl, verkadmet - Klasse:
Classification : 900 MPa (à température ambiante)/235 900 MPa (bei Raumtemperatur)/235 °C
°C
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3228:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 3228:2020
prEN 3228:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
4.1 Configuration — Dimensions — Masses . 5
4.2 Materials . 8
4.3 Surface treatment . 8
5 Designation. 8
6 Marking . 8
7 Technical specification . 9
8 Quality management system . 9
Bibliography . 10
2
---------------------- Page: 4 ----------------------
oSIST prEN 3228:2020
prEN 3228:2020 (E)
European foreword
This document (prEN 3228:2020) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3238:2010.
3
---------------------- Page: 5 ----------------------
oSIST prEN 3228:2020
prEN 3228:2020 (E)
1 Scope
This document specifies the characteristics of plain hexagonal nuts, reduced height, normal across flats,
in steel, cadmium plated, for aerospace applications.
1
Clas
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.