Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification

This European Standard specifies the characteristics, qualification and acceptance requirements for helical coil screw thread inserts. It is applicable whenever referenced.

Luft- und Raumfahrt - Draht-Gewindeeinsätze, MJ und M Gewinde -Technische Lieferbedingungen

Diese Europäische Norm legt die Eigenschaften sowie die Qualifikations- und Annahmebedingungen für Draht-Gewindeeinsätze fest.
Sie ist anzuwenden, wenn auf sie Bezug genommen wird.

Série aérospatiale - Filets rapportés MJ et M filetage - Spécification technique

La présente norme européenne spécifie les caractéristiques, et les exigences de qualification et de réception des filets rapportés hélicoïdaux.
Elle est applicable chaque fois qu'elle est citée en référence.

Aeronavtika - Vložki s spiralnim navojem MJ in M - Tehnična specifikacija

Ta evropski standard določa karakteristike ter zahteve glede kvalifikacije in sprejemljivosti za vložke s spiralnim navojem za vijačne tuljave. Uporablja se, kadar je naveden.

General Information

Status
Withdrawn
Publication Date
02-Dec-2019
Withdrawal Date
10-Apr-2024
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
26-Mar-2024
Due Date
18-Apr-2024
Completion Date
11-Apr-2024

Relations

Buy Standard

Standard
EN 2943:2020 - BARVE v tekstu !
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 2943:2020
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2943:2020
01-januar-2020
Nadomešča:
SIST EN 2943:2001
Aeronavtika - Vložki s spiralnim navojem MJ in M - Tehnična specifikacija
Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification
Luft- und Raumfahrt - Draht-Gewindeeinsätze, MJ und M Gewinde -Technische
Lieferbedingungen
Série aérospatiale - Filets rapportés MJ et M filetage - Spécification technique
Ta slovenski standard je istoveten z: EN 2943:2019
ICS:
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN 2943:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2943:2020

---------------------- Page: 2 ----------------------
SIST EN 2943:2020


EN 2943
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2019
EUROPÄISCHE NORM
ICS 49.030.30 Supersedes EN 2943:1998
English Version

Aerospace series - Inserts, MJ and M screw threads, helical
coil - Technical specification
Série aérospatiale - Filets rapportés, filetages MJ et M - Luft- und Raumfahrt - Draht-Gewindeeinsätze, MJ- und
Spécification technique M-Gewinde - Technische Lieferbedingungen
This European Standard was approved by CEN on 7 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2943:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 2943:2020
EN 2943:2019 (E)
Contents Page
European foreword . 3
1 Scope . 3
2 Normative references . 3
3 Terms and definitions . 4
4 Quality assurance . 6
4.1 Approval of manufacturers . 6
4.2 Qualification . 6
4.3 Acceptance . 6
4.3.1 Purpose . 6
4.3.2 Conditions . 7
4.3.3 Responsibility . 7
4.3.4 Inspection and test report . 7
5 Requirements .
...

SLOVENSKI STANDARD
SIST EN 2943:2020
01-januar-2020
Nadomešča:
SIST EN 2943:2001
Aeronavtika - Vložki s spiralnim navojem MJ in M - Tehnična specifikacija
Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification
Luft- und Raumfahrt - Draht-Gewindeeinsätze, MJ und M Gewinde -Technische
Lieferbedingungen
Série aérospatiale - Filets rapportés MJ et M filetage - Spécification technique
Ta slovenski standard je istoveten z: EN 2943:2019
ICS:
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN 2943:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2943:2020

---------------------- Page: 2 ----------------------
SIST EN 2943:2020


EN 2943
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2019
EUROPÄISCHE NORM
ICS 49.030.30 Supersedes EN 2943:1998
English Version

Aerospace series - Inserts, MJ and M screw threads, helical
coil - Technical specification
Série aérospatiale - Filets rapportés, filetages MJ et M - Luft- und Raumfahrt - Draht-Gewindeeinsätze, MJ- und
Spécification technique M-Gewinde - Technische Lieferbedingungen
This European Standard was approved by CEN on 7 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2943:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 2943:2020
EN 2943:2019 (E)
Contents
Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Quality assurance . 7
4.1 Approval of manufacturers . 7
4.2 Qualification . 7
4.3 Acceptance . 7
4.3.1 Purpose . 7
4.3.2 Conditions . 7
4.3.3 Responsibility . 7
4.3.4 Inspection and test report . 7
5 Requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.