SIST EN 2559:2023/A1:2024

Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area

This document specifies methods for determining the resin content, fibre content and mass of fibre per unit area of fibre preimpregnates for aerospace use.

Luft- und Raumfahrt - Carbon-, Glas- und Aramidfaser-Prepregs - Bestimmung des Harz- und Fasermasseanteils und der flächenbezogenen Fasermasse

Dieses Dokument legt Verfahren zur Bestimmung des Harzmasseanteils, des Fasermasseanteils und der flächenbezogenen Fasermasse von Faser-Prepregs für die Luft- und Raumfahrt fest.

Série aérospatiale - Préimprégnés de fibres de carbone, de verre et d'aramide - Détermination des teneurs en résine et en fibres et de la masse surfacique de la fibre

No scope available

Aeronavtika - Predimpregnirana ogljikova, steklena in aramidna vlakna - Ugotavljanje deleža smole in vlaken ter masa vlaken na enoto površine - Dopolnilo A1

Ta dokument določa metode za ugotavljanje deleža smole in vlaken ter mase vlaken na enoto površine predimpregniranih vlaken, ki se uporabljajo v aeronavtiki.

General Information

• Status: Published
• Public Enquiry End Date: 25-Jul-2023
• Publication Date: 30-May-2024
• ICS: 49.025.40 - Rubber and plastics
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 30-May-2024
• Due Date: 04-Aug-2024
• Completion Date: 31-May-2024
• Ref Project: EN 2559:2022/A1:2024 - Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area

Relations

• Amends: SIST EN 2559:2023 - Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
• Effective Date: 12-Apr-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2024
Aeronavtika - Predimpregnirana ogljikova, steklena in aramidna vlakna -
Ugotavljanje deleža smole in vlaken ter masa vlaken na enoto površine - Dopolnilo
A1
Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of
the resin and fibre content and the mass of fibre per unit area
Luft- und Raumfahrt - Carbon-, Glas- und Aramidfaser-Prepregs - Bestimmung des
Harz- und Fasermasseanteils und der flächenbezogenen Fasermasse
Série aérospatiale - Préimprégnés de fibres de carbone, de verre et d'aramide -
Détermination des teneurs en résine et en fibres et de la masse surfacique de la fibre
Ta slovenski standard je istoveten z: EN 2559:2022/A1:2024
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2559:2022/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 49.025.40
English Version
Aerospace series - Carbon, glass and aramid fibre
preimpregnates - Determination of the resin and fibre
content and the mass of fibre per unit area
Série aérospatiale - Préimprégnés de fibres de carbone, Luft- und Raumfahrt - Carbon-, Glas- und Aramidfaser-
de verre et d'aramide - Détermination des teneurs en Prepregs - Bestimmung des Harz- und
résine et en fibres et de la masse surfacique de la fibre Fasermasseanteils und der flächenbezogenen
Fasermasse
This amendment A1 modifies the European Standard EN 2559:2022; it was approved by CEN on 10 April 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2559:2022/A1:2024 E
worldwide for CEN national Members.

SIST E
...