SIST EN 300 433-2 V1.3.1:2011
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - Citizens' Band (CB) radio equipment - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Citizens' Band (CB) radio equipment - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Update/revision making to bring in line with latest guidance on creation of HENs. Amend test approaches. New revised standard should support also FM modulation for more simple conformity assessment procedure of combined AM/FM equipment.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Radijska oprema CB - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Izdelava nadgradnje/revizija za usklajevanje z najnovejšimi smernicami za izdelavo HEN. Pristopi k spremembam preskusov. Novi revidirani standardi morajo prav tako podpirati modulacijo FM za preprostejši postopek ocenitev skladnosti kombinirane opreme AM/FM.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM) - Citizens' Band (CB) radio equipment - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 300 433-2 Version 1.3.1SIST EN 300 433-2 V1.3.1:2011en01-september-2011SIST EN 300 433-2 V1.3.1:2011SLOVENSKI
STANDARD
SIST EN 300 433-2 V1.3.1:2011
ETSI EN 300 433-2 V1.3.1 (2011-07)Harmonized European Standard Electromagnetic compatibilityand Radio spectrum Matters (ERM);Citizens' Band (CB) radio equipment;Part 2: Harmonized EN covering the essential requirementsof article 3.2 of the R&TTE Directive SIST EN 300 433-2 V1.3.1:2011
ETSI ETSI EN 300 433-2 V1.3.1 (2011-07) 2
Reference REN/ERM-TGDMR-266-2 Keywords CB, radio, regulation, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 433-2 V1.3.1:2011
ETSI ETSI EN 300 433-2 V1.3.1 (2011-07) 3 Contents Intellectual Property Rights . 5 Foreword . 5 Introduction . 5 1 Scope . 6 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions, symbols and abbreviations . 8 3.1 Definitions . 8 3.2 Symbols . 8 3.3 Abbreviations . 8 4 Technical requirements . 8 4.1 Environmental profile . 8 4.2 Transmitter requirements . 8 4.2.1 Frequency error . 8 4.2.1.1 Definition . 8 4.2.1.2 Limit . 8 4.2.1.3 Conformance . 8 4.2.2 Transmitter power . 8 4.2.2.1 Definition . 8 4.2.2.2 Limit . 8 4.2.2.3 Conformance . 9 4.2.3 Maximum permissible frequency deviation . 9 4.2.3.1 Definition . 9 4.2.3.2 Limit . 9 4.2.3.3 Conformance . 9 4.2.4 Adjacent channel power . 9 4.2.4.1 Definition . 9 4.2.4.2 Limit . 9 4.2.4.3 Conformance . 9 4.2.5 Unwanted emissions in the spurious domain . 9 4.2.5.1 Definition . 9 4.2.5.2 Limits . 9 4.2.5.3 Conformance . 9 4.2.6 Transient behaviour of the transmitter . 9 4.2.6.1 Definition . 9 4.2.6.2 Limits . 9 4.2.6.3 Conformance . 10 4.3 Receiver requirements . 10 4.3.1 Spurious radiations . 10 4.3.1.1 Definition . 10 4.3.1.2 Limits . 10 4.3.1.3 Conformance . 10 5 Testing for compliance with technical requirements . 10 5.1 Environmental conditions for testing . 10 5.1.1 Normal and extreme test-conditions . 10 5.1.2 Test power source . 10 5.1.3 Choice of samples for the measurements . 10 5.2 Interpretation of the measurement results . 10 5.3 Essential test suites . 11 5.3.1 Frequency error . 11 5.3.2 Transmitter power . 11 5.3.3 Maximum permissible frequency deviation . 11 SIST EN 300 433-2 V1.3.1:2011
ETSI ETSI EN 300 433-2 V1.3.1 (2011-07) 4 5.3.4 Adjacent channels power . 11 5.3.5 Unwanted emissions in the spurious domain . 11 5.3.6 Transient behaviour of the transmitter . 11 5.3.7 Receiver spurious radiations . 11 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 12 Annex B (informative): The EN title in the official languages . 14 Annex C (informative): Bibliography . 15 History . 16
SIST EN 300 433-2 V1.3.1:2011
ETSI ETSI EN 300 433-2 V1.3.1 (2011-07) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [i.1] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2]. See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.2] are summarised in annex A. The present document is part 2 of a multi-part deliverable covering Citizens' Band (CB) radio equipment, as identified below: Part 1: "Technical characteristics and methods of measurement"; Part 2:
"Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". Significant changes from the previous version of the harmonised standard are: the standard includes angle modulated CB equipment and the adaption of maximum transmitter power levels.
National transposition dates Date of adoption of this EN: 5 July 2011 Date of latest announcement of this EN (doa): 31 October 2011 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 April 2012 Date of withdrawal of any conflicting National Standard (dow): 30 April 2013
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The modular structure is shown in EG 201 399 [i.3]. SIST EN 300 433-2 V1.3.1:2011
ETSI ETSI EN 300 433-2 V1.3.1 (2011-07) 6 1 Scope The present document covers the technical requirements for transmitters and receivers used in stations of angle modulated, Double Side Band (DSB) modulated and/or Single Side Band (SSB) modulated Citizens' Band (CB) radio equipment operating in all or part of the frequency band 26,960 MHz to 27,410 MHz with a channel spacing of 10 kHz, and intended for analogue speech and/or data transmission. Citizens' Band radio equipment operation is in accordance with Draft ECC Decision on the harmonised use of frequencies for Citizens' Band (CB) radio equipment [i.5]. The equipment operates on one or more channels of the carrier frequencies as shown in table 1. Table 1: Carrier frequencies Carrier frequencies Channel Number Carrier frequencies Channel Number 26,965 MHz 1 27,215 MHz 21 26,975 MHz 2 27,225 MHz 22 26,985 MHz 3 27,235 MHz 24 27,005 MHz 4 27,245 MHz 25 27,015 MHz 5 27,255 MHz 23 27,025 MHz 6 27,265 MHz 26 27,035 MHz 7 27,275 MHz 27 27,055 MHz 8 27,285 MHz 28 27,065 MHz 9 27,295 MHz 29 27,075 MHz 10 27,305 MHz 30 27,085 MHz 11 27,315 MHz 31 27,105 MHz 12 27,325 MHz 32 27,115 MHz 13 27,335 MHz 33 27,125 MHz 14 27,345 MHz 34 27,433 MHz 15 27,355 MHz 35 27,155 MHz 16 27,365 MHz 36 27,165 MHz 17 27,375 MHz 37 2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.