oSIST prEN IEC 60794-1-102:2025
(Main)Optical fibre cables - Part 1-102: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Abrasion, method e2
Optical fibre cables - Part 1-102: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Abrasion, method e2
Lichtwellenleiterkabel – Teil 1-102: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Mechanische Prüfverfahren - Abrieb, Verfahren E2
Câbles à fibres optiques - Partie 1-102: Spécification générique - Procédures fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Abrasion, méthode e2
Optični kabli - 1-102. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Mehanske preskusne metode - Odpornost, metoda e2
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2025
Optični kabli - 1-102. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Mehanske preskusne metode - Odpornost, metoda e2
Optical fibre cables - Part 1-102: Generic specification - Basic optical cable test
procedures - Mechanical tests methods - Abrasion, method e2
Câbles à fibres optiques - Partie 1-102: Spécification générique - Procédures
fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques -
Abrasion, méthode e2
Ta slovenski standard je istoveten z: prEN IEC 60794-1-102:2025
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
86A/2518/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-102 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-01-17 2025-04-11
SUPERSEDES DOCUMENTS:
86A/2479/CD, 86A/2516/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which
they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Optical fibre cables - Part 1-102: Generic specification - Basic optical cable test procedures -
Mechanical tests methods – Abrasion, Method E2
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
IEC CDV 60794-1-102/Ed1 © IEC 2025 – 2 – 86A/2518/CDV
1 CONTENTS
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 General requirements . 5
8 5 Method E2: Abrasion . 5
9 5.1 Object . 5
10 5.2 Sample . 5
11 5.3 Standard atmospheric conditions . 5
12 5.4 Method E2A: Abrasion resistance of optical fibre cable sheaths . 6
13 5.4.1 Apparatus . 6
14 5.4.2 Procedure . 6
15 5.4.3 Requirements . 6
16 5.4.4 Details to be specified . 6
17 5.5 Method E2B: Abrasion resistance of optical fibre cable markings . 7
18 5.5.1 Apparatus . 7
19 5.5.2 Procedure . 7
20 5.5.3 Requirements . 8
21 5.5.4 Details to be specified . 8
22 5.6 Details to be reported . 8
24 Figure 1 – Typical test set-up for tests E2A and E2B method 1 . 6
25 Figure 2 – Typical test set-up for test E2B, method 2 . 7
IEC CDV 60794-1-102/Ed1 © IEC 2025 – 3 – 86A/2518/CDV
28 INTERNATIONAL ELECTROTECHNICAL COMMISSION
29 ____________
31 OPTICAL FIBRE CABLES –
33 Part 1-102: Generic specification – Basic optical cable test procedures –
34 Mechanical test methods – Abrasion, Method E2
36 FOREWORD
37 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
38 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
39 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
40 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
41 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
42 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
43 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
44 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
45 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
46 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
47 consensus of opinion on the relevant subjects since each technical committee has representation from all
48 interested IEC National Committees.
49 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
50 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
51 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
52 misinterpretation by any end user.
53 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
54 transparently to the maximum extent possible in their national and regional publications. Any divergence between
55 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
56 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
57 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
58 services carried out by independent certification bodies.
59 6) All users should ensure that they have the latest edition of this publication.
60 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
61 members of its technical committees and IEC National Committees for any personal injury, property damage or
62 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
63 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
64 Publications.
65 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
66 indispensable for the correct application of this publication.
67 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of pat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.