SIST EN 12365-3:2003

Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method

This part 3 of prEN 33/WI 131/246 specifies the method to be used to select, percentage of recovery after being deflected through its working range under the conditions laid down in the test. The test has been devised to cover all likely gasket and weatherstripping shapes or materials.

Baubeschläge - Dichtungen und Dichtungenprofile für Fenster, Türen und andere Abschlüsse sowie vorgehängte Fassaden - Teil 3: Rückstellvermögen, Prüfverfahren

Dieser Teil der EN WI 33246 legt das Verfahren fest, das für die Auswahl, Konditionierung und Prüfung von Proben von Dichtungen und Dichtungsprofilen anzuwenden ist, um dann an ihnen den prozentualen Anteil des Ruckstellvermögens nach einer Durchbiegung innerhalb des Wirkungsbereichs unter den für die Prüfung vorgeschriebenen Bedingungen zu bestimmen. Die Prüfung gilt für alle möglichen Formen oder Materialien von Dichtungen und Dichtungsprofilen.

Quincaillerie pour le bâtiment - Profilés d'étanchéité de vitrage et entre ouvrant et dormant pour portes, de fenetres, fermeture et façades rideaux - Partie 3: Méthode d'essai pour déterminer la reprise élastique

La présente partie de l'EN 12365 spécifie la méthode devant etre utilisée pour sélectionner, préparer, conditionner et soumettre aux essais des échantillons de profilés d'étanchéité de vitrage et entre ouvrant et dormant, afin de déterminer le pourcentage de reprise élastique apres compression ou déformation a l'épaisseur minimale, a l'intérieur de la plage de travail dans les conditions fixées pour l'essai.

Stavbno okovje – Tesnila in tesnilni trakovi za vrata, okna, polkna in obešene fasade – 3. del: Preskusna metoda za ugotavljanje povratnih deformacij

General Information

• Status: Published
• Publication Date: 31-Oct-2003
• ICS: 91.060.50 - Doors and windows
• Technical Committee: ISTP - Doors and windows
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2003
• Due Date: 01-Nov-2003
• Completion Date: 01-Nov-2003
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 12365-3:2003 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method

Relations

• Parent: SIST EN 12365-1:2003 - Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stavbno okovje – Tesnila in tesnilni trakovi za vrata, okna, polkna in obešene fasade – 3. del: Preskusna metoda za ugotavljanje povratnih deformacijBaubeschläge - Dichtungen und Dichtungenprofile für Fenster, Türen und andere Abschlüsse sowie vorgehängte Fassaden - Teil 3: Rückstellvermögen, PrüfverfahrenQuincaillerie pour le bâtiment - Profilés d'étanchéité de vitrage et entre ouvrant et dormant pour portes, de fenetres, fermeture et façades rideaux - Partie 3: Méthode d'essai pour déterminer la reprise élastiqueBuilding hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 3: Deflection recovery test method91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 12365-3:2003SIST EN 12365-3:2003en,fr,de01-november-2003SIST EN 12365-3:2003SLOVENSKI
STANDARD



SIST EN 12365-3:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12365-3September 2003ICS 91.060.50; 91.190English versionBuilding hardware - Gasket and weatherstripping for doors,windows, shutters and curtain walling - Part 3: Deflectionrecovery test methodQuincaillerie pour le bâtiment - Profilés d'étanchéité devitrage et entre ouvrant et dormant pour portes, fenêtres,fermetures et façades rideaux - Partie 3: Méthode d'essaipour déterminer la reprise élastiqueBaubeschläge - Dichtungen und Dichtungenprofile fürFenster, Türen und andere Abschlüsse sowie vorgehängteFassaden - Teil 3: Rückstellvermögen, PrüfverfahrenThis European Standard was approved by CEN on 1 August 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12365-3:2003 ESIST EN 12365-3:2003



EN 12365-3:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Requirements.44.1Working temperature range.44.2Deflection recovery.55Test apparatus.55.1General.55.2Heating chamber.56Test procedure.56.1Test measurements.56.2Test samples.66.2.1General.66.2.2Conditioning.66.3Preparation of test pieces.67Test method.67.1Temperature and humidity.67.2Determination of free height.67.3Deflection recovery test.67.4Re-measurement of free height.77.5Expression of results.77.6Determination of final result of samples.78Test report.7Annex A (informative)
Arrangement of compression block.8Annex B (informative)
Flow chart of test procedure.9Bibliography.10SIST EN 12365-3:2003



EN 12365-3:2003 (E)3ForewordThis document (EN 12365-3:2003) has been prepared by Technical Committee CEN/TC 33 “Doors,windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by March 2004, and conflicting national standards shallbe withdrawn at the latest by March 2004.EN 12365 – Building hardware – Gaskets and weatherstripping, consists of the following parts :— Part 1: Performance requirements and classification;— Part 2: Linear compression force test method;— Part 3: Deflection recovery test method;— Part 4: Recovery after accelerated ageing test method.This Standard is one of a series of European Standards for building hardware.Annexes A and B are informative.Accordi
...