SIST EN IEC 61753-131-03:2022
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 131-03: Single-mode mechanical fibre splice for category OP - Outdoor Protected environment (IEC 61753-131-03:2021)
Fibre optic interconnecting devices and passive components - Performance standard - Part 131-03: Single-mode mechanical fibre splice for category OP - Outdoor Protected environment (IEC 61753-131-03:2021)
This part of IEC 61753 contains the minimum tests, test severities and measurement requirements which a mechanical fibre splice need to satisfy in order to be categorised as meeting the requirements of single-mode fibre splice for use in category OP (Outdoor protected) environments, as defined in IEC 61753-1.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 131-3: Mechanische Spleiße für Einmoden- Lichtwellenleiter für die Kategorie OP - Freiluft, geschützte Umgebung (IEC 61753-131-03:2021)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance - Partie 131-03 : Épissure mécanique de fibres unimodales pour catégorie OP - Environnement extérieur protégé (IEC 61753-131-03:2021)
IEC 61753-131-03:2021 indique les exigences minimales relatives aux essais, aux sévérités des essais ainsi qu’aux mesurages auxquelles il est nécessaire qu’une épissure mécanique de fibre satisfasse pour être classée comme satisfaisant aux exigences des épissures de fibres unimodales destinées à être utilisées dans des environnements de catégorie extérieur protégé (OP – Outdoor protected), tels qu’ils sont définis dans l’IEC 61753-1. Le présent document applicable aux épissures mécaniques définit les exigences de performance optique normalisée selon un ensemble de conditions spécifiées. La norme contient une série ou un ensemble d'essais et de mesurages dont les conditions, les sévérités et les critères d’acceptation/de rejet sont clairement indiqués. La série d'essais, à laquelle il est généralement fait référence en tant que catégorie de performance ou d'environnement de service de fonctionnement, est destinée à servir de base pour démontrer la capacité du produit à satisfaire aux exigences d'un secteur de marché, d'un groupe d'utilisateurs ou d'une application spécifique. Cette première édition annule et remplace l’IEC 61753-131-3 la première édition parue en 2010. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) ajout de définitions;
b) ajout de l’IEC 60068-2-10 essai de moisissure et sévérité d'essai pour les matériaux;
c) remplacement des essais de catégorie U de l’IEC 61753-1:2007 et de leurs sévérités par les essais de catégorie OP de l’IEC 61753‑1:2018;
d) ajout de l’exigence de conformité des dimensions à l’IEC 61756-1;
e) ajout de l'essai de moment de flexion;
f) modification de la température basse dans l’essai de froid et l’essai de variations de température à −25°C. Si 40°C est exigé, l’utilisateur peut se reporter à la catégorie OP+.
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 131-03. del: Enorodovna mehanska optična spojnica za kategorijo OP - Zunanje zaščiteno okolje (IEC 61753-131-03:2021)
Ta del standarda IEC 61753 vsebuje minimalne zahteve glede preskusov, stopenj zahtevnosti preskusov in merjenja, ki jih mora izpolnjevati mehanska optična spojnica, da ustreza zahtevam enorodovne optične spojnice za uporabo v kategoriji OP (Zunanje zaščiteno okolje), kot je opredeljeno v standardu IEC 61753-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61753-131-03:2022
01-januar-2022
Nadomešča:
SIST EN 61753-131-3:2011
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 131-03. del:
Enorodovna mehanska optična spojnica za kategorijo OP - Zunanje zaščiteno
okolje (IEC 61753-131-03:2021)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 131-03: Single-mode mechanical fibre splice for category OP - Outdoor Protected
environment (IEC 61753-131-03:2021)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
131-3: Mechanische Spleiße für Einmoden- Lichtwellenleiter für die Kategorie OP -
Freiluft, geschützte Umgebung (IEC 61753-131-03:2021)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 131-03 : Épissure mécanique de fibres unimodales pour catégorie OP -
Environnement extérieur protégé (IEC 61753-131-03:2021)
Ta slovenski standard je istoveten z: EN IEC 61753-131-03:2021
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-131-03:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61753-131-03:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 61753-131-03:2022
EUROPEAN STANDARD EN IEC 61753-131-03
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS 33.180.20 Supersedes EN 61753-131-3:2011 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 131-03: Single-mode mechanical
fibre splice for category OP - Outdoor protected environment
(IEC 61753-131-03:2021)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 131-03: Bauteile - Betriebsverhalten - Teil 131-3: Mechanische
Épissure mécanique de fibres unimodales pour catégorie Spleiße für Einmoden- Lichtwellenleiter für die Kategorie
OP - Environnement extérieur protégé OP - Freiluft, geschützte Umgebung
(IEC 61753-131-03:2021) (IEC 61753-131-03:2021)
This European Standard was approved by CENELEC on 2021-11-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61753-131-03:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61753-131-03:2022
EN IEC 61753-131-03:2021 (E)
European foreword
The text of document 86B/4500/FDIS, future edition 1 of IEC 61753-131-03, prepared by SC 86B
“Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics” was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 61753-131-03:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–08–08
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022–11–08
document have to be withdrawn
This document supersedes EN 61753-131-3:2011 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61753-131-03:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60721-3-1 NOTE Harmonized as EN IEC 60721-3-1
IEC 60721-3-2 NOTE Harmonized as EN IEC 60721-3-2
IEC 62005 (series) NOTE Harmonized as EN IEC 62005 (series)
2
---------------------- Page: 4 ----------------------
SIST EN IEC 61753-131-03:2022
EN IEC 61753-131-03:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-10 - Environmental testing - Part 2–10: Tests - EN 60068-2-10 -
Test J and guidance: Mould growth
IEC 60793-2-50 - Optical fibres - Part 2–50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 61073-1 - Fibre optic interconnecting devices and EN 61073-1 -
passive components - Mechanical splices
and fusion splice protectors for optical
fibres and cables - Part 1: Generic
specification
IEC 61300 series Fibre optic interconnecting devices and EN 61300 series
passive components - Basic test and
measurement procedures
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures - Part 2–1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2–4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures - Part 2–5: Tests
- Torsion
IEC 61300-2-7 - Fibre optic interconnecting devices and EN 61300-2-7 -
passive components - Basic test and
measurement procedures - Part 2–7: Tests
- Bending moment
3
---------------------- Page: 5 ----------------------
SIST EN IEC 61753-131-03:2022
EN IEC 61753-131-03:2021 (E)
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures - Part 2–9: Tests
- Shock
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2–17:
Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2–18:
Tests - Dry heat - High temperature
endurance
IEC 61300-2-22 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2–22:
Tests - Change of temperature
IEC 61300-2-26 - Fibre optic interconnecting devices and EN 61300-2-26 -
passive components - Basic test and
measurement procedures - Part 2–26:
Tests - Salt mist
IEC 61300-2-27 - Fibre optic interconnecting devices and EN 61300-2-27 -
passive components - Basic test and
measurement procedures - Part 2–27:
Tests - Dust - Laminar flow
IEC 61300-2-33 - Fibre optic interconnecting devices and EN 61300-2-33 -
passive components - Basic test and
measurement procedures - Part 2–33:
Tests - Assembly and disassembly of fibre
optic mechanical splices, fibre
management systems and closures
IEC 61300-2-46 - Fibre optic interconnecting devices and EN IEC 61300-2-46 -
passive components - Basic test and
measurement procedures - Part 2–46:
Tests - Damp heat, cyclic
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures - Part 3–3:
Examinations and measurements - Active
monitoring of changes in attenuation and
return loss
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 -
passive components - Basic test and
measurement procedures - Part 3–4:
Examinations and measurements -
Attenuation
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3–6:
Examinations and measurements - Return
loss
4
---------------------- Page: 6 ----------------------
SIST EN IEC 61753-131-03:2022
EN IEC 61753-131-03:2021 (E)
IEC 61300-3-7 - Fibre optic interconnecting devices and EN IEC 61300-3-7 -
passive components - Basic test and
measurement procedures - Part 3–7:
Examinations and measurements -
Wavelength dependence of attenuation
and return loss of single mode components
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures - Part 3–28:
Examinations and measurements -
Transient loss
IEC 61753-1 - Fibre optic interconnecting devices and EN IEC 61753-1 -
passive components - Performance
standard - Part 1: General and guidance
IEC 61756-1 - Fibre optic interconnecting devices and EN IEC 61756-1 -
passive components - Interface standard
for fibre management systems - Part 1:
General and guidance
5
---------------------- Page: 7 ----------------------
SIST EN IEC 61753-131-03:2022
---------------------- Page: 8 ----------------------
SIST EN IEC 61753-131-03:2022
IEC 61753-131-03
®
Edition 1.0 2021-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 131-03: Single-mode mechanical fibre splice for category OP – Outdoor
protected environment
Dispositifs d’interconnexion et composants passifs fibroniques – Norme de
performance –
Partie 131-03: Épissure mécanique de fibres unimodales pour catégorie OP –
Environnement extérieur protégé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-1029-3
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST EN IEC 61753-131-03:2022
– 2 – IEC 61753-131-03:2021 © IEC 2021
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 General requirements . 7
4.1 General . 7
4.2 Storage, transportation and packaging . 7
4.3 Marking and identification . 7
4.4 Materials . 8
5 Test . 8
5.1 General . 8
5.2 Test sample preparation . 8
5.3 Test and measurement methods . 8
5.4 Acceptance criteria . 9
5.5 Test report . 9
6 Performance tests, test severities and pass/fail requirements . 9
6.1 Sample size, sequencing and grouping . 9
6.2 Dimensions . 9
6.3 Installation yield requirement . 9
6.4 Pass/fail criteria . 9
6.5 Detailed performance requirements tests . 11
Annex A (normative) Fibre type for test samples . 15
Annex B (normative) Sample size and product sourcing requirements . 16
Bibliography . 17
Table 1 – Pass/fail requirements . 10
Table 2 – Performance requirements . 11
Table A.1 – Fibre type characteristics . 15
Table B.1 – Sample size per test . 16
---------------------- Page: 10 ----------------------
SIST EN IEC 61753-131-03:2022
IEC 61753-131-03:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 131-03: Single-mode mechanical fibre splice
for category OP – Outdoor protected environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 61753-131-03 has been prepared by subcommittee 86B: Fibre optic interconnecting
devices and passive components, of IEC technical committee 86: Fibre optics. It is an
International Standard.
This first edition cancels and replaces IEC 61753-131-3 first edition published in 2010. This
edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) addition of definitions;
b) addition of IEC 60068-2-10 mould growth test and test severities for materials;
c) replacement of the IEC 61753-1:2007 category U tests and test severities by the
IEC 61753-1:2018 category OP tests;
---------------------- Page: 11 ----------------------
SIST EN IEC 61753-131-03:2022
– 4 – IEC 61753-131-03:2021 © IEC 2021
d) addition of the requirement that dimensions are in accordance with IEC 61756-1;
e) addition of the bending moment test;
f) change of low temperature in cold test and change of temperature test to −25°C. If 40°C is
required, the user can refer to category OP+.
The text of this International Standard is based on the following documents:
Draft Report on voting
86B/4500/FDIS 86B/4524/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,
available at www.iec.ch/members_experts/refdocs. The main document types developed by
IEC are described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 61753 series, published under the general title Fibre optic
interconnecting devices and passive components – Performance standard, can be found on
the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 12 ----------------------
SIST EN IEC 61753-131-03:2022
IEC 61753-131-03:2021 © IEC 2021 – 5 –
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 131-03: Single-mode mechanical fibre splice
for category OP – Outdoor protected environment
1 Scope
This part of IEC 61753 contains the minimum tests, test severities and measurement
requirements which a mechanical fibre splice need to satisfy in order to be categorised as
meeting the requirements of single-mode fibre splice for use in category OP (Outdoor
protected) environments, as defined in IEC 61753-1.
This document for mechanical splices defines the requirements for standard optical
performance under a set of specified conditions. The standard contains a series or a set of
tests and measurements with clearly stated conditions, severities and pass/fail criteria. The
series of tests, commonly referred to as an operating service environment or performance
category, is intended to be a basis to prove the product’s ability to satisfy the requirements of
a specific application, market sector or user group.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 60068-2-10, Environmental testing – Part 2-10: Tests – Test J and guidance: Mould
growth
IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for
class B single-mode fibres
IEC 61073-1, Fibre optic interconnecting devices and passive components – Mechanical
splices and fusion splice protectors for optical fibres and cables – Part 1: Generic
specification
IEC 61300 (all parts), Fibre optic interconnecting devices and passive components – Basic
test and measurement procedures
IEC 61300-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 1: General and guidance
IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-4: Tests – Fibre or cable retention
IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-5: Tests – Torsion
---------------------- Page: 13 ----------------------
SIST EN IEC 61753-131-03:2022
– 6 – IEC 61753-131-03:2021 © IEC 2021
IEC 61300-2-7, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-7: Tests – Bending moment
IEC 61300-2-9, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-9: Tests – Shock
IEC 61300-2-17, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-17: Tests – Cold
IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-18: Tests – Dry heat – High temperature endurance
IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-22: Tests – Change of temperature
IEC 61300-2-26, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-26: Tests – Salt mist
IEC 61300-2-27, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-27: Tests – Dust – Laminar flow
IEC 61300-2-33, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-33: Tests – Assembly and disassembly of fibre optic
mechanical splices, fibre management systems and closures
IEC 61300-2-46, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 2-46: Tests – Damp heat, cyclic
IEC 61300-3-3, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-3: Examinations and measurements – Active monitoring of
changes in attenuation and return loss
IEC 61300-3-4, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-4: Examinations and measurements – Attenuation
IEC 61300-3-6, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-6: Examinations and measurements – Return Loss
IEC 61300-3-7, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-7: Examinations and measurements – Wavelength
dependence of attenuation and return loss of single mode components
IEC 61300-3-28, Fibre optic interconnecting devices and passive components – Basic test
and measurement procedures – Part 3-28: Examinations and measurements – Transient loss
IEC 61753-1, Fibre optic interconnecting devices and passive components – Performance
standard – Part 1: General and guidance
IEC 61756-1, Fibre optic interconnecting devices and passive components – Interface
standard for fibre management systems – Part 1: General and guidance
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 61073-1 apply.
---------------------- Page: 14 ----------------------
SIST EN IEC 61753-131-03:2022
IEC 61753-131-03:2021 © IEC 2021 – 7 –
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 General requirements
4.1 General
A product that has been shown to meet all the requirements of this performance standard can
be declared as conforming to this performance standard. Products having the same
classification from one manufacturer that satisfy this performance standard, will operate within
the boundaries set by the performance standard. There is no guarantee that products from
different manufacturers, having the same classification and which conform to the same
performance standard, will provide an equivalent level of performance when they are used
together.
Conformance to IEC environmental policy according to IEC Guide 109 and concerning the
need to reduce the impact on the natural environment of fibre management system products
during all phases of their life – from acquiring materials to manufacturing, distribution, use,
and end-of-life treatment (i.e. re-use, recycling – recovery and disposal) are not part of this
document, but will be covered in the generic specification.
Conformance to a performance standard demonstrates that a product has passed a design
verification test. It is not a guarantee of lifetime assured performance or reliability. Reliability
testing are the subject of a separate test schedule, where the tests and severities selected
are such that they are truly representative of the requirements of this reliability test
programme. Consistency of manufacture is maintained using a recognised quality assurance
programme whilst the reliability of product is evaluated using the procedures recommended in
IEC 62005 series.
Tests and measurements are selected from IEC 61300 (all parts).
4.2 Storage, transportation and packaging
The classes of environmental conditions and their severities to which the mechanical splice
can be exposed during transportation are defined in IEC 60721-3-1 and IEC 60721-3-2.
Normal transportation time is considered to be 30 days or less.
The product, in its original packaging, shall be suitable for normal public or commercial
transportation and storage in weather protected non-temperature controlled storage
environments and after installation meet the requirements as specified in Table 1 and Table 2.
4.3 Marking and identification
Marking of the packaging of the mechanical splice shall be according to IEC 61073-1.
Product m
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.