SIST EN 14066:2013
(Main)Natural stone test methods - Determination of resistance to ageing by thermal shock
Natural stone test methods - Determination of resistance to ageing by thermal shock
This European Standard specifies a method to assess possible changes of natural stones under the effect of sudden changes in temperature (thermal shock).
Prüfverfahren für Naturstein - Bestimmung des Widerstandes gegen Alterung durch Wärmeschock
Diese Europäische Norm legt ein Verfahren für die Beurteilung möglicher Veränderungen von Natursteinen unter Einwirkung plötzlicher Temperaturwechsel (Wärmeschock) fest.
Méthodes d'essai pour les pierres naturelles - Détermination de la résistance au vieillissement accéléré par choc thermique
La présente Norme européenne décrit une méthode permettant de déterminer les modifications possibles des pierres naturelles sous l’effet de changements brusques de températures (choc thermique).
Preskušanje naravnega kamna - Ugotavljanje odpornosti proti staranju s temperaturnim šokom
Ta evropski standard določa metodo za ocenjevanje morebitnih sprememb naravnega kamna zaradi nenadnih sprememb temperature (temperaturni šok).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskušanje naravnega kamna - Ugotavljanje odpornosti proti staranju s temperaturnim šokomPrüfverfahren für Naturstein - Bestimmung des Widerstandes gegen Alterung durch WärmeschockMéthodes d'essai pour les pierres naturelles - Détermination de la résistance au vieillissement accéléré par choc thermiqueNatural stone test methods - Determination of resistance to ageing by thermal shock91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 14066:2013SIST EN 14066:2013en,fr,de01-junij-2013SIST EN 14066:2013SLOVENSKI
STANDARDSIST EN 14066:20031DGRPHãþD
SIST EN 14066:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14066
March 2013 ICS 73.020; 91.100.15 Supersedes EN 14066:2003English Version
Natural stone test methods - Determination of resistance to ageing by thermal shock
Méthodes d'essai pour les pierres naturelles - Détermination de la résistance au vieillissement accéléré par choc thermique
Prüfverfahren für Naturstein - Bestimmung des Widerstandes gegen Alterung durch Wärmeschock This European Standard was approved by CEN on 19 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14066:2013: ESIST EN 14066:2013
EN 14066:2013 (E) 2 Contents Page Foreword .3 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Symbols and abbreviations .5 5 Principle .6 6 Apparatus .6 7 Preparation of specimens .6 7.1 Sampling .6 7.2 Dimensions of the test specimens.6 7.3 Putting reference marks on the specimens .6 7.4 Drying the specimens .7 8 Test procedure .7 8.1 Control measurements before cycling .7 8.2 Description of the cycles .7 8.3 Control measurements after cycling .7 9 Expression of results .7 9.1 Visual appearance .7 9.2 Modulus of elasticity .7 9.3 Open porosity .8 9.4 Ultrasound pulse velocity .8 9.5 Flexural strength .8 10 Test report .8 Bibliography . 10
SIST EN 14066:2013
EN 14066:2013 (E) 3 Foreword This document (EN 14066:2013) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14066:2003. The following modifications have been made: The new standard requires the evaluation of the produced decay through both non-destructive and destructive methods. Specimens' dimensions have been modified. The normative references have been updated. Test methods for natural stone consist of the following European Standards: EN 1925, Natural stone test methods – Determination of water absorption coefficient by capillarity EN 1926, Natural stone test methods – Determination of uniaxial compressive strength
EN 1936, Natural stone test methods – Determination of real density and apparent density, and of total and open porosity EN 12370, Natural stone test methods – Determination of resistance to salt crystallisation
EN 12371, Natural stone test methods – Determination of frost resistance
EN 12372, Natural stone test methods – Determination of flexural strength under concentrated load
EN 12407, Natural stone test methods – Petrographic examination
EN 13161, Natural stone test methods – Determination of flexural strength under constant moment
EN 13364, Natural stone test methods – Determination of the breaking load at dowel hole
EN 13373, Natural stone test methods – Determination of geometric characteristics on units EN 13755, Natural stone test methods – Determination of water absorption at atmospheric pressure
EN 14146, Natural stone test methods – Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency) EN 14147, Natural stone test methods – Determination of resistance to ageing by salt mist
SIST EN 14066:2013
EN 14066:2013 (E) 4 EN 14157, Natural stone test methods – Determination of the abrasion resistance
EN 14158, Natural stone test methods – Determination of rupture energy
EN 14205, Natural stone test methods – Determination of Knoop hardness
EN 14231, Natural stone test methods – Determination of the slip resistance by means of the pendulum tester EN 14579, Natural stone test methods – Determination of sound speed propagation EN 14580, Natural stone test methods – Determination of static elastic modulus
EN 14581, Natural stone test methods – Determination of linear thermal expansion coefficient According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.