Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power (IEC 61300-2-14:2021)

This part of IEC 61300 describes a procedure for determining the suitability of a fibre optic
interconnecting device or a passive component to withstand exposure to the optical power which
occurs during its operation.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-14: Prüfungen - Hohe Optische Leistung (IEC 61300-2-14:2021)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-14: Essais - Puissance optique élevée (IEC 61300-2-14:2021)

IEC 61300-2-14:2021 est disponible sous forme de IEC 61300-2-14:2021 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 61300-2-14:2021 décrit une méthode en vue de déterminer l'aptitude d'un dispositif d'interconnexion ou d'un composant passif fibronique à résister à l'exposition à une puissance optique susceptible d'apparaître au cours du fonctionnement. Cette quatrième édition annule et remplace la troisième édition parue en 2012. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente : - harmonisation de l’IEC 61300-1:2016 et de l’IEC 61300-3-4:2012; - ajout de termes abrégés; - ajout de l’Article A.2 relatif à la puissance optique d’entrée des deux extrémités.

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-14. del: Preskusi - Visoka optična moč (IEC 61300-2-14:2021)

General Information

Status
Published
Publication Date
22-Apr-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
31-Mar-2021
Due Date
05-Jun-2021
Completion Date
23-Apr-2021

RELATIONS

Buy Standard

Standard
SIST EN IEC 61300-2-14:2021
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 61300-2-14:2021
01-junij-2021
Nadomešča:
SIST EN 61300-2-14:2013
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni
postopki - 2-14. del: Preskusi - Visoka optična moč (IEC 61300-2-14:2021)
Fibre optic interconnecting devices and passive components - Basic test and

measurement procedures - Part 2-14: Tests - High optical power (IEC 61300-2-14:2021)

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und

Messverfahren - Teil 2-14: Prüfungen - Hohe Optische Leistung (IEC 61300-2-14:2021)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes

fondamentales d'essais et de mesures - Partie 2-14: Essais - Puissance optique élevée

(IEC 61300-2-14:2021)
Ta slovenski standard je istoveten z: EN IEC 61300-2-14:2021
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61300-2-14:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61300-2-14:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 61300-2-14:2021
EUROPEAN STANDARD EN IEC 61300-2-14
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2021
ICS 33.180.20 Supersedes EN 61300-2-14:2013 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 2-14: Tests -
High optical power
(IEC 61300-2-14:2021)

Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive

fibroniques - Procédures fondamentales d'essais et de Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-

mesures - Partie 2-14: Essais - Puissance optique élevée 14: Prüfungen - Hohe Optische Leistung

(IEC 61300-2-14:2021) (IEC 61300-2-14:2021)

This European Standard was approved by CENELEC on 2021-03-18. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 61300-2-14:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61300-2-14:2021
EN IEC 61300-2-14:2021 (E)
European foreword

The text of document 86B/4299/CDV, future edition 4 of IEC 61300-2-14, prepared by SC 86B "Fibre

optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to

the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61300-2-14:2021.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2021-12-18

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2024-03-18

document have to be withdrawn

This document supersedes EN 61300-2-14:2013 and all of its amendments and corrigenda (if any).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard IEC 61300-2-14:2021 was approved by CENELEC as a

European Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards

indicated:
IEC 61300 (series) NOTE Harmonized as EN 61300 (series)
IEC 61300-3-4:2012 NOTE Harmonized as EN 61300-3-4:2013 (not modified)
IEC 62005-9-4 NOTE Harmonized as EN IEC 62005-9-4
---------------------- Page: 4 ----------------------
SIST EN IEC 61300-2-14:2021
EN IEC 61300-2-14:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),

the relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60825-1 - Safety of laser products - Part 1: EN 60825-1 -
Equipment classification and requirements
IEC 61300-1 - Fibre optic interconnecting devices and EN IEC 61300-1 -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 -
passive components - Basic test and
measurement procedures - Part 3-1:
Examinations and measurements - Visual
examination
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures - Part 3-3:
Examinations and measurements - Active
monitoring of changes in attenuation and
return loss
IEC 61300-3-35 - Fibre optic interconnecting devices and EN IEC 61300-3-35 -
passive components - Basic test and
measurement procedures - Part 3-35:
Examinations and measurements - Visual
inspection of fibre optic connectors and
fibre-stub transceivers
---------------------- Page: 5 ----------------------
SIST EN IEC 61300-2-14:2021
---------------------- Page: 6 ----------------------
SIST EN IEC 61300-2-14:2021
IEC 61300-2-14
Edition 4.0 2021-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures –
Part 2-14: Tests – High optical power
Dispositifs d'interconnexion et composants passifs fibroniques – Procédures
fondamentales d'essais et de mesures –
Partie 2-14: Essais – Puissance optique élevée
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-9267-9

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 61300-2-14:2021
– 2 – IEC 61300-2-14:2021 © IEC 2021
CONTENTS

FOREWORD ........................................................................................................................... 3

1 Scope .............................................................................................................................. 5

2 Normative references ...................................................................................................... 5

3 Terms, definitions and abbreviated terms ........................................................................ 5

3.1 Terms and definitions .............................................................................................. 5

3.2 Abbreviated terms ................................................................................................... 5

4 Apparatus ........................................................................................................................ 6

4.1 Source (S) .............................................................................................................. 6

4.2 Optical detector (D) ................................................................................................. 6

4.3 Environmental chamber .......................................................................................... 7

4.4 Data acquisition system (DAS) ................................................................................ 7

4.5 Branching device (BD) ............................................................................................ 7

4.6 Temporary joints (TJ) .............................................................................................. 7

4.7 Safety devices ........................................................................................................ 7

4.8 Test set-up ............................................................................................................. 7

5 Procedure ........................................................................................................................ 8

5.1 Preconditioning ....................................................................................................... 8

5.2 Initial examinations and measurements ................................................................... 8

5.3 Conditioning ............................................................................................................ 8

5.4 Recovery ................................................................................................................ 8

5.5 Final examinations and measurements ................................................................... 9

6 Severity ........................................................................................................................... 9

6.1 General ................................................................................................................... 9

6.2 Optical power .......................................................................................................... 9

6.3 Wavelengths ........................................................................................................... 9

6.4 Temperature ........................................................................................................... 9

6.5 Humidity ................................................................................................................. 9

6.6 Exposure time ......................................................................................................... 9

7 Details to be specified ................................................................................................... 10

Annex A (normative) Examples of test set-up ....................................................................... 11

A.1 WDM devices ........................................................................................................ 11

A.2 Input optical power from both ends ....................................................................... 11

A.3 Series connection set-up ....................................................................................... 12

Annex B (informative) Examples of pass/fail criteria during exposure time ........................... 14

B.1 General ................................................................................................................. 14

B.2 Attenuation limitation of monitoring ....................................................................... 14

B.3 Return loss limitation ............................................................................................ 15

B.4 Judgment based on the change ............................................................................ 15

Bibliography .......................................................................................................................... 16

Figure 1 – Typical optical power test set-up ............................................................................ 7

Figure A.1 – Example of optical power test set-up for a 2 x 1 WDM device ........................... 11

Figure A.2 – Example of test set-up of both direction input test ............................................. 12

Figure A.3 – Example of optical power test set-up in series connection ................................. 13

---------------------- Page: 8 ----------------------
SIST EN IEC 61300-2-14:2021
IEC 61300-2-14:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-14: Tests – High optical power
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

may participate in this preparatory work. International, governmental and non-governmental organizations liaising

with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence between

any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent

rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 61300-2-14 has been prepared by subcommittee 86B: Fibre optic

interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.

This fourth edition cancels and replaces the third edition published in 2012. This edition

constitutes a technical revision.

This edition includes the following significant technical changes with respect to the previous

edition:
a) harmonizing IEC 61300-1:2016 and IEC 61300-3-4:2012;
b) addition of abbreviated terms;
c) addition of Clause A.2 regarding input optical power from both ends.
---------------------- Page: 9 ----------------------
SIST EN IEC 61300-2-14:2021
– 4 – IEC 61300-2-14:2021 © IEC 2021
The text of this International Standard is based on the following documents:
CDV Report on voting
86B/4299/CDV 86B/4362A/RVC

Full information on the voting for the approval of this International Standard can be found in the

report on voting indicated in the above table.

This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

A list of all parts in the IEC 61300 series, published under the general title Fibre optic

interconnecting devices and passive components – Basic test and measurement procedures,

can be found on the IEC website.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 10 ----------------------
SIST EN IEC 61300-2-14:2021
IEC 61300-2-14:2021 © IEC 2021 – 5 –
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-14: Tests – High optical power
1 Scope

This part of IEC 61300 describes a procedure for determining the suitability of a fibre optic

interconnecting device or a passive component to withstand exposure to the optical power which

occurs during its operation.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies.

For undated references, the latest edition of the referenced document (including any

amendments) applies.

IEC 60825-1, Safety of laser products – Part 1: Equipment classification and requirements

IEC 61300-1, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 1: General and guidance

IEC 61300-3-1, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 3-1: Examinations and measurements – Visual examination

IEC 61300-3-3, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 3-3: Examinations and measurements – Active monitoring of

changes in attenuation and return loss
IEC 61300-3-35, Fibre optic interconnectin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.