SIST EN ISO 3822-3:1999

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances

This part of EN ISO 3822 specifies the mounting and operating conditions to be used for on-line valves and appliances which control the flow, pressure or temperature of the water in water supply installations, when measuring noise emission resulting from water flow. It is applicable to in-line valves and appliances of maximum nominal size DN 32 and to systems in which the maximum water flow rate does not exceed 2 l/s. The procedures described are for general use for all types of in-line valves of conventional design.

Akustik - Prüfung des Geräuschverhaltens von Armaturen und Geräten der Wasserinstallation im Laboratorium - Teil 3: Anschluß- und Betriebsbedingungen für Durchgangsarmaturen

Dieser Teil der EN ISO 3822 legt die Anschluß- und Betriebsbedingungen für Durchgangsarmaturen und Geräte zum Einstellen von Durchfluß, Druck oder Temperatur des Wassers in Wasserinstallationsanlagen bei der Messung des Geräusches fest, das durch Fließen des Wassers hervorgerufen wird. Sie ist für Durchgangsarmaturen und Geräte mit einer größten Nennweite von DN 32 und Einrichtungen, in denen der größte Durchfluß 2 l/s nicht überschritten wird, anwendbar.

Acoustique - Mesurage en laboratoire du bruit émis par les robinetteries et les équipements hydrauliques utilisés dans les installations de distribution d'eau - Partie 3: Conditions de montage et de fonctionnement des robinetteries et des équipements hydrauliques en ligne

La présente partie de l'EN ISO 3822 spécifie les conditions de montage de fonctionnement a utiliser pour les robinetteries et les équipements hydrauliques en ligne qui contrôlent le débit, la pression ou la température de l'eau dans les installations de distribution d'eau, quand on mesure le bruit émis résultant de l'écoulement de l'eau. Elle est applicable aux robinetteries et aux équipements hydrauliques en lignes de dimension nominale DN 32 et aux dispositifs dans lesquels le débit d'eau maximal dans le dispositif ne dépasse pas 2 l/s.

Akustika - Laboratorijski preskusi emisije hrupa armatur in naprav pri inštalacijah za oskrbo z vodo - 3. del: Pogoji za priključitev in delovanje pretočnih armatur (ISO 3822-3:1997)

Določa pogoje priključitve in delovanja, ki se uporabljajo za pretočne ventile in armature, kateri nadzorujejo pretok, pritisk ali temperaturo vode v napravah za oskrbo z vodo, kadar se merijo emisije hrupa, ki nastaja zaradi pretoka vode. Uporablja se za pretočne ventile in armature, ki so maksimalne nominalne velikosti DN 32 ter pri sistemih, kjer vrednost največjega pretoka vode ne preseže 2 l/s. Opisani postopek velja za splošno uporabo in za vse vrste pretočnih ventilov konvencionalnih oblik.

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-1999
• Withdrawal Date: 15-Mar-2018
• ICS: 17.140.20 - Noise emitted by machines and equipment
• ICS: 91.140.60 - Water supply systems
• Technical Committee: AKU - Acoustics
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 15-Mar-2018
• Due Date: 07-Apr-2018
• Completion Date: 16-Mar-2018
• Directive: 89/106/EEC - Construction products
• Mandate: M/BC/CEN/91/8 - CPD: Protection against noise
• Ref Project: EN ISO 3822-3:1997 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances

Relations

• Amended By: SIST EN ISO 3822-3:1999/A1:2010 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances - Amendment 1 (ISO 3822-3:1997/Amd 1:2009)
• Effective Date: 01-Feb-2010
• Replaced By: SIST EN ISO 3822-3:2018 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:2018)
• Effective Date: 01-Apr-2018
• Amended By: SIST EN ISO 3822-3:1999/A1:2010 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances - Amendment 1 (ISO 3822-3:1997/Amd 1:2009)
• Effective Date: 08-Jun-2022
• Replaced By: SIST EN ISO 3822-3:2018 - Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:2018)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3822-3:1999
01-november-1999
$NXVWLND/DERUDWRULMVNLSUHVNXVLHPLVLMHKUXSDDUPDWXULQQDSUDYSULLQãWDODFLMDK
]DRVNUER]YRGRGHO3RJRML]DSULNOMXþLWHYLQGHORYDQMHSUHWRþQLKDUPDWXU,62

Acoustics - Laboratory tests on noise emission from appliances and equipment used in
water supply installations - Part 3: Mounting and operating conditions for in-line valves
and appliances
Akustik - Prüfung des Geräuschverhaltens von Armaturen und Geräten der
Wasserinstallation im Laboratorium - Teil 3: Anschluß- und Betriebsbedingungen für
Durchgangsarmaturen
Acoustique - Mesurage en laboratoire du bruit émis par les robinetteries et les
équipements hydrauliques utilisés dans les installations de distribution d'eau - Partie 3:
Conditions de montage et de fonctionnement des robinetteries et des équipements
hydrauliques en ligne
Ta slovenski standard je istoveten z: EN ISO 3822-3:1997
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 3822-3:1999 en
2003-01.Slovenski inštitut za s
...