Aerospace series - Arc Fault Circuit breakers, three-pole, temperature compensated, rated currents 3 A to 25 A, 115/200 V a.c. 400 Hz constant frequency - Part 003: Without auxiliary contacts - Product standard

This European Standard specifies the required characteristics for three-pole, arc fault circuit breakers,
rated currents from 3 A to 25 A, switching capacity 65 In, for use in aircraft electrical systems. Their
operating temperatures are between − 40 °C to 85 °C at a maximum altitude of Z = 15 000 m. The thermal
protection is temperature compensated and operates between − 55 °C and 125 °C.
These arc fault circuit breakers are operated by a push-pull type single pushbutton (actuator), with
delayed action "trip-free" tripping.
They will continue to function up to the short-circuit current.

Luft- und Raumfahrt - Schutzschalter, lichtbogen (überschlags)sensitiv, dreipolig, temperaturkompensiert, Nennströme von 3 A bis 25 A, 115/200 V a.c. 400 Hz Konstantfrequenz - Teil 003: Ohne Signalkontakt - Produktnorm

Série aérospatiale - Disjoncteurs tripolaires à détection d’arc, compensés en température, intensités nominales 3 A á 25 A, 115/200 V c.a. 400 Hz fréquence fixe - Partie 003 : Sans contacts auxiliaires - Norme de produit

Aeronavtika - Obločni dušilni odklopniki, tripolni, temperaturno kompenzirani, za naznačene toke od 3 A do 25 A, 115/200 V izmenična napetost, 400 Hz konstantna frekvenca - 003. del: Brez pomožnih kontaktov - Standard za proizvod

Ta evropski standard določa potrebne lastnosti obločnih dušilnih odklopnikov, tripolnih, temperaturno kompenziranih, za naznačene toke od 3 A do 25 A, s preklopno zmogljivostjo 65 In, za uporabo v letalskih električnih sistemih. Njihove obratovalne temperature so od 40 °C do 85 °C pri največji višini Z = 15.000 m. Toplotna zaščita je temperaturno kompenzirana in obratuje pri temperaturah od  55 °C do 125 °C.
Ti obločni dušilni odklopniki se upravljajo z enim gumbom (sprožilom) vrste potisni-povleci, z zakasnjenim proženjem brez sprožila.
Delovali bodo do kratkega stika.

General Information

Status
Published
Publication Date
28-Oct-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Oct-2018
Due Date
23-Dec-2018
Completion Date
29-Oct-2018

Buy Standard

Standard
EN 4839-003:2018
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YRGLuft- und Raumfahrt - Schutzschalter, lichtbogen (überschlags)sensitiv, dreipolig, temperaturkompensiert, Nennströme von 3 A bis 25 A, 115/200 V a.c. 400 Hz Konstantfrequenz - Teil 003: Ohne Signalkontakt - ProduktnormSérie aérospatiale - Disjoncteurs tripolaires à détection d’arc, compensés en température, intensités nominales 3 A á 25 A, 115/200 V c.a. 400 Hz fréquence fixe - Partie 003 : Sans contacts auxiliaires - Norme de produitAerospace series - Arc Fault Circuit breakers, three-pole, temperature compensated, rated currents 3 A to 25 A, 115/200 V a.c. 400 Hz constant frequency - Part 003: Without auxiliary contacts - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4839-003:2018SIST EN 4839-003:2018en,fr,de01-december-2018SIST EN 4839-003:2018SLOVENSKI
STANDARD



SIST EN 4839-003:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4839-003
October
t r s z ICS
v {ä r x r English Version
Aerospace series æ Arc Fault Circuit breakersá threeæpoleá temperature compensatedá rated currents
u A to
t w Aá Without auxiliary contacts æ Product standard Série aérospatiale æ Disjoncteurs tripolaires à détection d 5arcá compensés en températureá intensités nominales Partie
r r u ã Sans contacts auxiliaires æ Norme de produit
Luftæ und Raumfahrt æ Schutzschalterá lichtbogen temperaturkompensiertá Nennströme von
u A bis
t w Aá Ohne Signalkontakt æ Produktnorm This European Standard was approved by CEN on
z February
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v z u {æ r r uã t r s z ESIST EN 4839-003:2018



EN 4839-003:2018 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Dimension and mass . 5 5 Characteristics . 6 6 Designation. 11 7 Rated current code . 11 8 Delivery codes . 11 9 Marking . 12 10 Technical specification . 12
SIST EN 4839-003:2018



EN 4839-003:2018 (E) 3 European foreword This document (EN 4839-003:2018) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April,2019 and conflicting national standards shall be withdrawn at the latest by April,2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. SIST EN 4839-003:2018



EN 4839-003:2018 (E) 4 1 Scope This European Standard specifies the required characteristics for three-pole, arc fault circuit breakers, rated currents from 3 A to 25 A, switching capacity 65 In, for use in aircraft electrical systems. Their operating temperatures are between − 40 °C to 85 °C at a maximum altitude of Z = 15 000 m. The thermal protection is temperature compensated and operates between − 55 °C and 125 °C. These arc fault circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action "trip-free" tripping. They will continue to function up to the short-circuit current. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 3841-100, Aerospace series — Circuit breakers — Test Methods — Part 100: General EN 3841-305, Aerospace series — Circuit breakers — Test Methods — Part 305: Short-circuit performance EN 4839-001, Aerospace series — Arc fault circuit breakers, three-pole, temperature compensated, rated current from 3 A to 25 A, 115 V a.c. 400 Hz constant frequency — Part 001: Technical specification EN 6113, Aerospace series — Circuit breaker, connecting and attachment hardware TR 6083, Aerospace series — Cut-outs f
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.