SIST ISO 4384-1:2015

Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials

This part of ISO 4384 specifies parameters for the hardness testing of compound materials for plain
bearings made from steel and bearing metal with bearing metals based on copper and aluminium,
manufactured by casting, sintering or bonding. It represents a supplement to the existing ISO
publications on hardness testing and, therefore, includes only the extensions and restrictions to be
observed compared to those publications.
The measuring method applied depends on the bearing metal layer thickness, its hardness and its structure.

Paliers lisses - Essai de dureté des matériaux antifriction - Partie 1: Matériaux multicouches pour paliers lisses

Drsni ležaji - Preskušanje trdote materialov za ležaje - 1. del: Kompozitni materiali

Ta del standarda ISO 4384 določa parametre za preskušanje trdote kompozitnih materialov za drsne ležaje, ki so izdelani iz jekla in ležajnega materiala, pri čemer ležajni materiali temeljijo na bakru in aluminiju ter so izdelani z litjem, sintranjem ali lepljenjem. Predstavlja dodatek k obstoječim objavam ISO o preskušanju trdote in zato vključuje samo razširitve ter omejitve, ki jih je treba upoštevati v primerjavi s temi objavami. Uporabljena merilna metoda je odvisna od debeline, trdote in strukture kovinske plasti ležaja.

General Information

• Status: Withdrawn
• Publication Date: 19-Feb-2015
• Withdrawal Date: 23-Jun-2020
• ICS: 21.100.10 - Plain bearings
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 24-Jun-2020
• Due Date: 17-Jul-2020
• Completion Date: 24-Jun-2020
• Ref Project: ISO 4384-1:2012 - Plain bearings — Hardness testing of bearing metals — Part 1: Multilayer bearings materials

Relations

• Replaces: SIST ISO 4384-1:2002 - Plain bearings -- Hardness testing of bearing metals -- Part 1: Compound materials
• Effective Date: 01-Mar-2015
• Revised: SIST ISO 4384-1:2020 - Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials
• Effective Date: 23-Apr-2020

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 4384-1
Third edition
2012-10-01
Plain bearings — Hardness testing of
bearing metals —
Part 1:
Multilayer bearings materials
Paliers lisses — Essai de dureté des matériaux antifriction —
Partie 1: Matériaux multicouches pour paliers lisses
Reference number
ISO 4384-1:2012(E)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 4384-1:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 4384-1:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Specimen . 1
4 Procedure. 1
5 Test report . 2
© ISO 2012 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 4384-1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4384-1 was prepared by Technical Committee ISO/TC 123, Plain bearings, Subcommittee SC
...

SLOVENSKI STANDARD
SIST ISO 4384-1:2015
01-marec-2015
1DGRPHãþD
SIST ISO 4384-1:2002
Drsni ležaji - Preskušanje trdote materialov za ležaje - 1. del: Kompozitni materiali
Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings
materials
Paliers lisses - Essai de dureté des matériaux antifriction - Partie 1: Matériaux
multicouches pour paliers lisses
Ta slovenski standard je istoveten z: ISO 4384-1:2012
ICS:
21.100.10 Drsni ležaji Plain bearings
SIST ISO 4384-1:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 4384-1:2015

---------------------- Page: 2 ----------------------

SIST ISO 4384-1:2015
INTERNATIONAL ISO
STANDARD 4384-1
Third edition
2012-10-01
Plain bearings — Hardness testing of
bearing metals —
Part 1:
Multilayer bearings materials
Paliers lisses — Essai de dureté des matériaux antifriction —
Partie 1: Matériaux multicouches pour paliers lisses
Reference number
ISO 4384-1:2012(E)
©
ISO 2012

---------------------- Page: 3 ----------------------

SIST ISO 4384-1:2015
ISO 4384-1:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 4384-1:2015
ISO 4384-1:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Specimen . 1
4 Procedure. 1
5 Test report . 2
© ISO 2012 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 4384-1:2015
ISO 4384-1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the tech
...