SIST EN 14837:2006

Surfaces for sports areas - Determination of slip resistance

This European Standard specifies a method for the determination of the slip resistance of a sports surface in relation to a studded or smooth soled sports shoe.

Sportböden - Bestimmung der Rutschfestigkeit

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Rutschfestigkeit eines Sportbodens in Bezug
auf einen Sportschuh mit Stollenprofil oder glatter Sohle fest.

Sols sportifs - Détermination de la glissance

La présente Norme européenne spécifie une méthode de détermination de la glissance d’un sol sportif par
rapport a une chaussure de sport a crampons ou a semelle lisse.

Podloge za športne dejavnosti - Ugotavljanje odpornosti proti zdrsu

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2006
• Withdrawal Date: 19-Nov-2020
• ICS: 97.220.10 - Sports facilities
• Technical Committee: SPO - Sports
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-Nov-2020
• Due Date: 13-Dec-2020
• Completion Date: 20-Nov-2020
• Ref Project: EN 14837:2006 - Surfaces for sports areas - Determination of slip resistance

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Surfaces for sports areas - Determination of slip resistancePodloge za športne dejavnosti - Ugotavljanje odpornosti proti zdrsuSols sportifs - Détermination de la glissanceSportböden - Bestimmung der RutschfestigkeitTa slovenski standard je istoveten z:EN 14837:2006SIST EN 14837:2006en97.220.10ICS:SLOVENSKI
STANDARDSIST EN 14837:200601-julij-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14837May 2006ICS 97.150; 97.220.10 English VersionSurfaces for sports areas - Determination of slip resistanceSols sportifs - Détermination de la glissanceSportböden - Bestimmung der RutschfestigkeitThis European Standard was approved by CEN on 13 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14837:2006: E



EN 14837:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative reference.4 3 Terms and definitions.4 4 Principle.4 5 Apparatus.4 6 Test piece.11 7 Procedure.11 8 Calculation and expression of results.11 9 Test report.12 Bibliography.13



EN 14837:2006 (E) 3 Foreword This document (EN 14837:2006) has been prepared by CEN /TC 217, "Surfaces for sports areas", the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 14837:2006 (E) 4 1 Scope This European Standard specifies a method for the determination of the slip resistance of a sports surface in relation to a studded or smooth soled sports shoe. 2 Normative reference The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 4662, Rubber – Determination of rebound resilience of vulcanizates. 3 Terms and definitions For the purposes of this document, the following term and definition applies. 3.1 slip resistance calculated value from the reduction of the height of rise of a pendulum as a result of the friction between the profile and sports surface using correction factors 4 Principle A free falling weight covered with a rubber or plastic shoe profile (studded or smooth) rotates around a horizontal axis (pendulum). During its circular course, the profile is dragged over the sports surface and is slowed down by the friction between the shoe profile and the test surface. 5 Apparatus 5.1 Slip resistance tester (see Figure 1), comprising:  pendulum, having a length (axis to shoe profile) of 340 mm ± 3 mm;  falling weight, having a mass of 1 600 g ± 50 g (including pendulum arm, metal profile holder and shoe profile);  profile holder, with a sharp pointer to adjust the pressure on the profile;  spring, having a K-value of 0,8 N/mm ± 0,05 N/mm, to adjust the pressure of the shoe profile on the test piece;  frame equipped with a device to hold the pendulum horizontal prior to the start of the test and to release the pendulum at the start of the test;  scale, with a p
...