oSIST prEN IEC 61810-7-1:2023
(Main)Electrical relays - Tests and Measurements - Part 7-1: Visual inspection and check of dimensions
Electrical relays - Tests and Measurements - Part 7-1: Visual inspection and check of dimensions
Relais électriques - Essais et mesurages - Partie 1: Examen visuel et contrôle des dimensions
Električni releji - Preskusi in meritve - 7-1. del: Vizualni pregled in preverjanje mer
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61810-7-1:2023
01-september-2023
Električni releji - Preskusi in meritve - 7-1. del: Vizualni pregled in preverjanje mer
Electrical relays - Tests and Measurements - Part 7-1: Visual inspection and check of
dimensions
Ta slovenski standard je istoveten z: prEN IEC 61810-7-1:2023
ICS:
29.120.70 Releji Relays
oSIST prEN IEC 61810-7-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61810-7-1:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61810-7-1:2023
94/878/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61810-7-1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-07-07 2023-09-29
SUPERSEDES DOCUMENTS:
94/837/CD, 94/865/CC
IEC TC 94 : ELECTRICAL RELAYS
SECRETARIAT: SECRETARY:
Austria Mr Bernhard Spalt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 121,SC 121A
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Electrical relays – Tests and Measurements - Part 7-1: Visual inspection and check of
dimensions
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61810-7-1:2023
– 2 – IEC CDV 61810-7-1:2023 © IEC 2023
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 5
6 4 Test procedure . 6
7 5 Evaluation . 8
8 Bibliography . 10
9
10
11
---------------------- Page: 4 ----------------------
oSIST prEN IEC 61810-7-1:2023
IEC CDV 61810-7-1:2023 © IEC 2023 – 3 –
12 INTERNATIONAL ELECTROTECHNICAL COMMISSION
13 ____________
14
15 Electrical Relays –
16 Tests and measurements
17
18 Part 7-1: Visual inspection and check of dimensions
19
20 FOREWORD
21 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization
22 comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to p
23 2) romote international co-operation on all questions concerning standardization in the electrical and electronic
24 fields. To this end and in addition to other activities, IEC publishes International Standards, Technical
25 Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred
26 to as "IEC Publication(s)"). Their preparation is entrusted to technical committees; any IEC National
27 Committee interested in the subject dealt with may participate in this preparatory work. International,
28 governmental and non-governmental organizations l
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.