SIST ETS 300 758-3:2000

Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for end system configuration; Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) for Fixed radio Termination (FT)

Profile Test Specifications (PTS) for testing if an equipment complies with the DECT/ISDN interworking profile. The DECT/ISDN PTS is based on the GAP test specification and the DECT CI conformance testing specification, and includes Profile Specific Test Specifications (PSTS).

Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Digitalno omrežje z integriranimi storitvami (ISDN) - Vzajemno delovanje DECT/ISDN v obliki končnega sistema - Profil preskuševalne specifikacije (PTS) - 3. del: Profil preskuševalne specifikacije, odvisne od profila (PSTS), za fiksno radijsko zaključitev (FT)

General Information

• Status: Published
• Publication Date: 31-Dec-1999
• ICS: 33.070.30 - Digital Enhanced Cordless Telecommunications (DECT)
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2000
• Due Date: 01-Jan-2000
• Completion Date: 01-Jan-2000
• Mandate: T-306
• Ref Project: ETSI ETS 300 758-3 ed.1 (1997-04) - Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for end system configuration; Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) for Fixed radio Termination (FT)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); DECT/ISDN interworking for end system configuration; Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) for Fixed radio Termination (FT)33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:ETS 300 758-3 E13SIST ETS 300 758-3:en01-QRYHPEHr-3SIST ETS 300 758-3:SLOVENSKI
STANDARD
EUROPEANETS 300 758-3TELECOMMUNICATIONApril 1997STANDARDSource: ETSI EP-DECTReference: DE/DECT-040018-3ICS:33.020Key words:DECT, ISDN, interworking, PTS, radio, testing, TTCNDigital Enhanced Cordless Telecommunications (DECT);Integrated Services Digital Network (ISDN);DECT/ISDN interworking for end system configuration;Profile Test Specification (PTS);Part 3: Profile Specific Test Specification (PSTS)for Fixed radio Termination (FT)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail].: [phone] - Fax: [phone]Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1997. All rights reserved.SIST ETS 300 758-3:2000

Page 2ETS 300 758-3: April 1997Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 758-3:2000

Page 3ETS 300 758-3: April 1997ContentsForeword.71Scope.92Normative references.93Definitions and abbreviations.123.1Definitions.123.2Abbreviations.124DECT NWK layer protocol.144.1Additional test purposes.144.2Abstract test method.144.3Relevant test cases.154.4Modified test cases.175DECT DLC layer protocol.185.1Additional test purposes.185.2Abstract test method.205.3Relevant test cases.205.4Additional test cases.206DECT MAC layer protocol.216.1Additional test purposes.216.2Abstract test method.226.3Relevant test cases.226.4Additional Test Cases.247DECT Physical Layer (PHL) protocol.247.1Additional Test Purposes.247.2Abstract test method.247.3Relevant test cases.248ISDN protocols.258.1Applicability of ATS.258.2ISDN primary access protocols.258.2.1Additional test purposes.258.2.2Abstract test method.258.2.3Relevant test cases.258.2.4Additional selection expression.258.3ISDN basic access protocols.268.3.1Additional test purposes.268.3.2Abstract test method.268.3.3Relevant test cases.268.3.4Additional selection expression.269DECT GAP profile.269.1Additional test purposes.269.2Abstract test method.269.3Relevant test cases.2610DECT/ISDN IAP profile.2710.1Profile test suite structure.2710.1.1Test groups.2710.1.1.1Protocol groups.2810.1.1.1.1The IWU procedures.28SIST ETS 300 758-3:2000

Page 4ETS 300 758-3: April 199710.1.1.1.2The IWU mappings.2810.1.1.1.3The profile specific NWK procedures.2810.1.1.1.4The profile specific DLC procedures.2810.1.1.2Main test groups.2810.1.1.2.1Capability (CA) tests.2910.1.1.2.2Valid Behaviour (BV) tests.2910.1.1.2.3Inopportune Behaviour (BO) tests.2910.1.1.2.4Invalid Behaviour (BI) tests.2910.2Profile test purposes.2910.2.1TP definition conventions.2910.2.2TP naming conventions.3010.2.3Sources of TP definitions.3010.2.4Test purposes for call establishment procedures.3110.2.5Test purposes for call information procedures.3210.2.6Test purposes for call release procedures.3310.2.7Test purposes for supplementary service specific procedures.3410.2.8Test purposes for CISS functional protocol procedures.3810.2.9Test purposes for CRSS functional protocol procedures.3910.2.10Test purposes for CRSS keypad protocol procedures.4510.2.11Test purposes for IWU messages mapping.4610.2.12Test purposes for IWU management of call control protocol.4810.2.13Test purposes for segmented messages.4810.3Profile Abstract Test Method (ATM).4810.4Profile Untestable test purposes.4910.5Profile ATS Conventions.4910.5.1Declarations part naming conventions.5010.5.1.1Type and structured type definitions.5010.5.1.2Operations definitions.5010.5.1.3Parameter declarations.5010.5.1.4Selection expression definitions.5010.5.1.5Constant declarations.5010.5.1.6Test suite variable declarations.5010.5.1.7Test case variable declarations.5110.5.1.8PCO declarations.5110.5.1.9Timer declarations.5110.5.1.10ASP type definitions.5110.5.1.11PDU type definitions.5110.5.1.12Alias definitions.5210.5.2Constraints part naming conventions.5210.5.3Dynamic part naming conventions.5210.5.3.1Test Case identifier.5210.5.3.2Test step identifier.5310.5.3.3Default identifier.5310.5.3.4General aspects.5310.5.3.5ATS abbreviations.5310.5.4Declaration part implementation conventions.5310.5.5Constraint part implementation conventions.5410.5.6Dynamic part implementation conventions.5410.5.7Documentation implementation conventions.5510.6Test case and test purpose mapping.55Annex A (normative):Profile Implementation eXtra Information for Testing (IXIT) proforma forDECT/ISDN IAP profile - Fixed radio Termination (FT).56A.1Identification summary.56A.2ATS summary.56A.3Test laboratory.56A.4Client identification.57A.5System Under Test (SUT).57SIST ETS 300 758-3:2000

Page 5ETS 300 758-3: April 1997A.6Profile information.58Annex B (normative):Profile Conformance Test Report (Profile CTR) proforma for DECT/ISDN IAPprofile - Fixed radio Termination (FT).60B.1Identification summary.60B.1.1Protocol conformance test report.60B.1.2IUT identification.60B.1.3Testing environment.61B.1.4Limits and reservation.61B.1.5Comments.61B.2IUT conformance status.61B.3Static conformance summary.62B.4Dynamic conformance summary.62B.5Static conformance review report.62B.6Test campaign report.63B.7Observations.64Annex C (normative):System Conformance Test Report proforma (SCTR) for DECT/ISDN IAPprofile - Fixed radio Termination (FT).65C.1Identification summary.65C.1.1System conformance test report.65C.1.2Test laboratory.65C.1.3Client identification.66C.1.4SUT.66C.1.5Profile identification.66C.1.6Nature of conformance testing.67C.1.7Limits and reservations.67C.1.8Record of agreement.67C.1.9Comments.68C.2System report summary for DECT/ISDN IAP FT.68C.2.1Profile testing summary for DECT NWK layer protocol.68C.2.2Profile testing summary for DECT DLC layer protocol.69C.2.3Profile testing summary for DECT MAC layer protocol.70C.2.4Profile testing summary for DECT PHL protocol.71C.2.5Profile testing summary for ISDN L3, L2, L1 primary access protocol.72C.2.6Profile testing summary for ISDN L3, L2, L1 basic access protocol.73C.2.7Profile testing summary for DECT GAP profile.74C.2.8Profile testing summary for DECT/ISDN IAP profile.75Annex D (normative):Profile eXtra Requirement List (XRL) proforma for DECT/ISDN IAP profile -Fixed radio Termination (FT).76D.1ISDN primary access protocols.76D.2ISDN basic access protocols.76Annex E (normative):Modifications of the PCTR proforma related to DECT/ISDN IAP profile -Fixed radio Termination (FT).77E.1Modifications of DECT NWK layer PCTR proforma.77E.2Modifications of DECT DLC layer PCTR proforma.80SIST ETS 300 758-3:2000

Page 6ETS 300 758-3: April 1997E.3Modifications of DECT MAC layer PCTR proforma.82E.4Observations.84Annex F (normative):Abstract Test Suite (ATS) for DECT NWK layer conforming to DECT/ISDNIAP profile - Fixed radio Termination (FT).85F.1The machine processable ATS (TTCN.MP).85F.2The graphical ATS (TTCN.GR).85Annex G (normative):Abstract Test Suite (ATS) for DECT DLC layer conforming to DECT/ISDNIAP profile - Fixed radio Termination (FT).86G.1The machine processable ATS (TTCN.MP).86G.2The graphical ATS (TTCN.GR).86Annex H (normative):Abstract Test Suite (ATS) for DECT MAC layer conforming to DECT/ISDNIAP profile - Fixed radio Termination (FT).87H.1The machine processable ATS (TTCN.MP).87H.2The graphical ATS (TTCN.GR).87Annex I (normative):Abstract Test Suite (ATS) - DECT/ISDN IAP - Fixed radio Termination (FT).88I.1The machine processable ATS (TTCN.MP).88I.2The graphical ATS (TTCN.GR).88History.89SIST ETS 300 758-3:2000

Page 7ETS 300 758-3: April 1997ForewordThis European Telecommunication Standard (ETS) has been produced by the Digital Enhanced CordlessTelecommunications (DECT) Project of the European Telecommunications Standards Institute (ETSI).This ETS consists of 3 parts as follows:Part 1:"PTS - summary".Part 2:"Profile Specific Test Specification (PSTS) for Portable radio Termination (PT)".Part 3:"Profile Specific Test Specification (PSTS) for Fixed radio Termination (FT)".Transposition datesDate of adoption:4 April 1997Date of latest announcement of this ETS (doa):31 July 1997Date of latest publication of new National Standardor endorsement of this ETS (dop/e):31 January 1998Date of withdrawal of any conflicting National Standard (dow):31 January 1998SIST ETS 300 758-3:2000

Page 8ETS 300 758-3: April 1997Blank pageSIST ETS 300 758-3:2000

Page 9ETS 300 758-3: April 19971ScopeThis European Telecommunication Standard (ETS) contains the test specification for Digital EnhancedCordless Telecommunications/Integrated Services Digital Network (DECT/ISDN) Interworking AccessProfile (IAP) Fixed Part (FP) applications as specified in ETS 300 434-1 [6] and ETS 300 434-2 [7].This test specification provides conformance tests for DECT/ISDN terminal equipment conforming toETS 300 434-1 [6] and ETS 300 434-2 [7]. The main objective is to perform a high probability of inter-operability between the DECT/ISDN terminal equipment and an ISDN network. The DECT/ISDN terminalequipment contains Fixed Part and Portable Parts that may be supplied by different manufacturers.The ISO standard for the methodology of conformance testing ISO/IEC 9646 [22] to [28] is used as thebasis for the test methodology, and as the basis for test case specification.The test cases if listed in this ETS have been derived from the corresponding Abstract Test Suite (ATS).Additional DECT/ISDN IAP specific test cases are included where required.Annex A provides Profile Implementation eXtra Information for Testing (IXIT) proforma part of thisspecification.Annex B provides Profile Conformance Test Report (Profile CTR) proforma part of this specification.Annex C provides System Conformance Test Report proforma (SCTR) part of this specification.Annex D provides the Profile IXIT Requirements List (XRL) proforma part of this specification.Annex E provides modifications of DECT layer Protocol Conformance Test Report (PCTR) proforma ofthis specification.Annex F provides the Tree and Tabular Combined Notation (TTCN) part for DECT Network (NWK) layerconforming to the requirements of this specification.Annex G provides the Tree and Tabular Combined Notation (TTCN) part for DECT Data Link Control(DLC) layer conforming to the requirements of this specification.Annex H provides the Tree and Tabular Combined Notation (TTCN) part for DECT MAC layer conformingto the requirements of this specification.Annex I provides the Tree and Tabular Combined Notation (TTCN) part for DECT/ISDN Interworking Unit(IWU) - IAP profile.2Normative references[1]ETS 300 175-2: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 2: PhysicalLayer".[2]ETS 300 175-3: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 3: MediumAccess Control (MAC) layer".[3]ETS 300 175-4: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 4: DataLink Control (DLC) layer".[4]ETS 300 175-5: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 5: Network(NWK) layer".[5]ETS 300 444 (1995): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Generic Access Profile (GAP)".SIST ETS 300 758-3:2000

Page 10ETS 300 758-3: April 1997[6]ETS 300 434-1: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT) and Integrated Services Digital Network(ISDN) interworking for end system configuration; Part 1: Interworkingspecification".[7]ETS 300 434-2: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT) and Integrated Services Digital Network(ISDN) interworking for end system configuration; Part 2: Access profile".[8]ETS 300 176: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Approval test specification".[9]ETS 300 476-4: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 4: Network(NWK) layer - Fixed radio Termination (FT)".[10]ETS 300 476-5: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 5: Data LinkControl (DLC) layer - Fixed radio Termination (FT)".[11]ETS 300 476-6: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 6: MediumAccess Control (MAC) layer - Fixed radio Termination (FT)".[12]ETS 300 476-7: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 7: Physicallayer".[13]ETS 300 474-2: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Generic Access Profile (GAP); Profilerequirement list and profile specific Implementation Conformance Statement(ICS) proforma; Part 2: Fixed radio Termination (FT)"[14]ETS 300 705-2: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications/Integrated Services Digital Network(DECT/ISDN) interworking for end system configuration; Profile ImplementationConformance Statement (ICS); Part 2: Fixed radio Termination (FT)".[15]ETS 300 497-1: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 1: Test Suite Structure (TSS) and Test Purposes (TP) forMedium Access Control (MAC) layer".[16]ETS 300 497-3: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 3: Abstract Test Suite (ATS) for Medium Access Control(MAC) layer - Fixed radio Termination (FT)".[17]ETS 300 497-4: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 4: Test Suite Structure (TSS) and Test Purposes (TP) - DataLink Control (DLC) layer".[18]ETS 300 497-5: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 5: Abstract Test Suite (ATS) - Data Link Control (DLC)layer".SIST ETS 300 758-3:2000

Page 11ETS 300 758-3: April 1997[19]ETS 300 497-8: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 8: Test Suite Structure (TSS) and Test Purposes (TP) -Network (NWK) layer - Fixed radio Termination (FT)".[20]ETS 300 497-9: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL); Part 9: Abstract Test Suite (ATS) for Network (NWK) layer - Fixedradio Termination (FT)".[21]ETS 300 494-3: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Generic Access Profile (GAP); ProfileTest Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) -Fixed radio Termination (FT)".[22]ISO/IEC 9646-1 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 1:General concepts". (See also CCITT Recommendation X.290 (1991)).[23]ISO/IEC 9646-2 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 2:Abstract test suite specification". (See also CCITT Recommendation X.291(1991)).[24]ISO/IEC 9646-3 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 3:The tree and tabular combined notation". (See also CCITT RecommendationX.292 (1992)).[25]ISO/IEC 9646-4 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 4:Test realisation". (See also CCITT Recommendation X.292 (1992)).[26]ISO/IEC 9646-5 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 5:Requirements on test laboratories and clients for the conformance assessmentprocess". (See also CCITT Recommendation X.292 (1992)).[27]ISO/IEC 9646-6 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 6:Protocol profile test specification".[28]ISO/IEC 9646-7 (1995): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 7:Implementation Conformance Statements".[29]ETS 300 403-1: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1: Protocol specification [ITU-T RecommendationQ.931 (1993), modified]".[30]ETS 300 403-3: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 3: Protocol Implementation ConformanceStatement (PICS) proforma specification".[31]ETS 300 402-2: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1) protocol; Data link layer; Part 2: Generalprotocol specification [ITU-T Recommendation Q.921 (1993), modified]".SIST ETS 300 758-3:2000

Page 12ETS 300 758-3: April 1997[32]ETS 300 402-4: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1) protocol; Data link layer; Part 4: ProtocolImplementation Conformance Statement (PICS) proforma specification for thegeneral protocol".[33]ETS 300 011 (1992): "Integrated Services Digital Network (ISDN); Primary rateuser-network interface; Layer 1 specification and test principles".[34]ETS 300 011/A2: "Amendment 2 to ETS 300 011 (1992), adding a SCS, a PICSand a PIXIT for interface points Ia and Ib".[35]ETS 300 012 (1992): "Integrated Services Digital Network (ISDN); Basic user-network interface; Layer 1 specification and test principles".[36]ETS 300 012/A2: "Amendment 2 to ETS 300 012 (1992), adding a SCS, a PICSand a PIXIT for interface points Ia and Ib".[37]TBR 3: "Integrated Services Digital Network (ISDN); Attachment requirementsfor terminal equipment to connect to an ISDN using ISDN basic access".[38]TBR 4: "Integrated Services Digital Network (ISDN); Attachment requirementsfor terminal equipment to connect to an ISDN using ISDN primary rate access".[39]TBR 22: "Radio Equipment and Systems (RES); Attachment requirements forterminal equipment for Digital Enhanced Cordless Telecommunications (DECT)Generic Access Profile (GAP) applications".3Definitions and abbreviations3.1DefinitionsFor the purposes of this ETS, the following terms and definitions apply:a)the terms defined in ISO/IEC 9646-7 [28]; andb)the definitions in ETS 300 434-1 [6] and ETS 300 434-2 [7].3.2AbbreviationsFor the purposes of this ETS, the abbreviations defined in ISO/IEC 9646-1 [22], ISO/IEC 9646-6 [27],ISO/IEC 9646-7 [28], the abbreviations defined in ETS 300 434-1 [6] and ETS 300 434-2 [7] apply. Inparticular, the following abbreviations apply:ASPAbstract Service PrimitiveATMAbstract Test MethodATSAbstract Test SuiteBIInvalid BehaviourBOInopportune BehaviourBVValid BehaviourCACapability testsCCCall ControlCICommon InterfaceCISSCall Independent Supplementary ServicesCPCo-ordination PointCTRConformance Test ReportDECTDigital Enhanced Cordless TelecommunicationsDLCData Link ControlDFSDECT Fixed SystemDPSDECT Portable SystemFTFixed radio TerminationGAPGeneric Access ProfileICSImplementation Conformance StatementIEInformation ElementSIST ETS 300 758-3:2000

Page 13ETS 300 758-3: April 1997ISDNIntegrated Services Digital NetworkIUTImplementation Under TestIXITImplementation eXtra Information for TestingIWPInterworking ProfileIWUInterworking UnitLCELink Control EntityLTLower TesterLTSLocal Test StepMACMedium Access Control layerMMMobility Management entityMTCMaster Test ComponentNWKNetworkPCOPoint of Control and ObservationPCTRProtocol Conformance Test ReportPDUProtocol Data UnitPHLPhysical LayerPICSProtocol Implementation Conformance StatementPIXITProtocol Implementation eXtra Information for TestingPSTSProfile Specific Test SpecificationPTPortable radio TerminationPTCParallel Test ComponentPTSProfile Test SpecificationRLRequirements ListSDUService Data UnitSCSSystem Conformance StatementSCTRSystem Conformance Test ReportSUTSystem Under TestTPTest PurposeTSSTest Suite StructureTTCNTree and Tabular Combined NotationUTUpper TesterXRLIXIT Requirements listSIST ETS 300 758-3:2000

Page 14ETS 300 758-3: April 19974DECT NWK layer protocol4.1Additional test purposesFigure 1 shows the NWK Test Suite Structure (TSS) defined in ETS 300 497-8 [19] for the conformancetesting.CCLCICCICRSCBVBIITBVBITIBVBVTIISMLLRLSRSBOTIBIBVMOBVLLLEAUPRKACACABOMMLOPMNWKMEBOOCITIDARCHFigure 1: NWK TSSAll test purposes for Call Control (CC) entity of the NWK layer as specified in ETS 300 497-8 [19] applywith no required addition.All test purposes for Link Control Entity (LCE) of the NWK layer as specified in ETS 300 497-8 [19] applywith no required addition.All test purposes for Call Independent Supplementary Services (CISS) entity of the NWK layer asspecified in ETS 300 497-8 [19] apply with no required addition.4.2Abstract test methodAs stated in ETS 300 497-9 [20], the Abstract Test Method (ATM) used for the DECT NWK layer is theremote embedded test method.The DECT/ISDN IAP implies no modification for the definition and the use of the ATM.SIST ETS 300 758-3:2000

Page 15ETS 300 758-3: April 19974.3Relevant test casesThe test cases defined for the test group "FT/CC/BV/OC" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_CC_BV_OC_01;-TC_FT_CC_BV_OC_02;-TC_FT_CC_BV_OC_03;-TC_FT_CC_BV_OC_04;-TC_FT_CC_BV_OC_05.The test cases defined for the test group "FT/CC/BV/IC" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_CC_BV_IC_01;-TC_FT_CC_BV_IC_02.The test cases defined for the test group "FT/CC/BV/CI" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_CC_BV_CI_01;-TC_FT_CC_BV_CI_02;-TC_FT_CC_BV_CI_03;-TC_FT_CC_BV_CI_04;-TC_FT_CC_BV_CI_05;-TC_FT_CC_BV_CI_06;-TC_FT_CC_BV_CI_07;-TC_FT_CC_BV_CI_08;-TC_FT_CC_BV_CI_09;-TC_FT_CC_BV_CI_10.The test cases defined for the test group "FT/CC/BV/CR" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_CC_BV_CR_01;-TC_FT_CC_BV_CR_02;-TC_FT_CC_BV_CR_03;-TC_FT_CC_BV_CR_04;-TC_FT_CC_BV_CR_05;-TC_FT_CC_BV_CR_06;-TC_FT_CC_BV_CR_07;-TC_FT_CC_BV_CR_08;-TC_FT_CC_BV_CR_09;-TC_FT_CC_BV_CR_10;-TC_FT_CC_BV_CR_11;-TC_FT_CC_BV_CR_12.The test cases defined for the test group "FT/CC/BV/RS" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_CC_BV_RS_07.The test cases defined for the test group "FT/CC/BV/BO" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_CC_BV_BO_01;-TC_FT_CC_BV_BO_02.SIST ETS 300 758-3:2000

Page 16ETS 300 758-3: April 1997The test cases defined for the test group "FT/CC/BI" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_CC_BI_01;-TC_FT_CC_BI_02;-TC_FT_CC_BI_03;-TC_FT_CC_BI_04.The test cases defined for the test group "FT/CC/TI" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_CC_TI_01;-TC_FT_CC_TI_02;-TC_FT_CC_TI_03;-TC_FT_CC_TI_04.The test cases defined for the test group "FT/LC/BV/LE" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_LC_BV_LE_01;-TC_FT_LC_BV_LE_02;-TC_FT_LC_BV_LE_03.The test cases defined for the test group "FT/LC/BV/LR" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_LC_BV_LR_01;-TC_FT_LC_BV_LR_02;-TC_FT_LC_BV_LR_03;-TC_FT_LC_BV_LR_04.The test cases defined for the test group "FT/LC/BI" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_LC_BI_01;-TC_FT_LC_BI_03;-TC_FT_LC_BI_04;-TC_FT_LC_BI_05;-TC_FT_LC_BI_06;-TC_FT_LC_BI_07.The test cases defined for the test group "FT/LC/TI" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_LC_TI_02;-TC_FT_LC_TI_03.The test cases defined for the test group "FT/IS/BV" in ETS 300 497-9 [20] relevant for the profileaccording to their own selection rules are:-TC_FT_IS_BV_01;-TC_FT_IS_BV_02;-TC_FT_IS_BV_03.SIST ETS 300 758-3:2000

Page 17ETS 300 758-3: April 19974.4Modified test casesTest cases, in witch the following call control messages can be received and sent, are considered asmodified test cases due to the new format of these messages:-CC-SETUP;-CC-INFO;-CC-ALERTING;-CC-CONNECT;-CC-RELEASE;-CC-RELEASE-COM.The new format of these messages implies a set of modified TTCN constraint.Test cases, in witch the following call control messages can be sent, are considered as modified testcases due to the new format of these messages:-CC-SETUP-ACK;-CC-CALL-PROC;-CC-CONNECT-ACK.The new format of these messages implies a set of modified TTCN constraint.Test cases, in witch the following CISS messages can be received and sent, are considered as modifiedtest cases due to the new format of these messages:-FACILITY-ciss;-CISS-REGISTER;-CISS-RELEASE-COM.The new format of these messages implies a set of modified TTCN constraint.Test cases, in witch the following CISS messages can be sent, are considered as modified test cases dueto the new format of these messages:-HOLD-REJECT;-RETRIEVE-REJECT.The new format of these messages implies a set of modified TTCN constraint.Test cases, in witch some messages use the following information elements, are considered as modifiedtest cases due to the new value range of some fields:-Call attributes;-IWU-to-IWU;-Progress indicator.The new value range of the fields of these information elements implies a set of modified TTCNconstraint.Test cases, in witch the CC_02 timer is used, are considered as modified test cases due to the new valueof this timer.The value of the CC_02 timer (changed from 30s to 36s) shall be updated by modifying the associatedtest suite parameter.SIST ETS 300 758-3:2000

Page 18ETS 300 758-3: April 19975DECT DLC layer protocol5.1Additional test purposesFigure 2 shows the Data Link Control Test Suite Structure (TSS) defined in ETS 300 497-4 [17] for theconformance testing.DLCC-planeU-planeClass 0Class 1Class 2Class 3BVCABOBIBVCABOBIBVCABOBIBVCABOBIClass UClass AClass BLbBVCABOBIBVCABOBIBVCABOBIBVCABOBIFigure 2: DLC TSSAdditional test purposes for LU7 are added in the functional module "Class 0" and in the correspondingstandard main test group CA, BV, BO and BI.According to the Test Purpose (TP) naming convention and the existing TP defined inETS 300 497-4 [17], the identifier to use for the first additional test purpose is "DLC/U-Plane/Class0/TP0V–000".SIST ETS 300 758-3:2000

Page 19ETS 300 758-3: April 1997DLC/U-Plane/Class0/TP0V-000ETS 300 434-1 [6], subclause B.4.3.2.1ETS 300 476-2 [10] Protocol ICS table A.28 item 1Only for an Implementation Under Test (IUT), that transmits astream of data frames after the establishment of the LU7 service.Initial condition: The LU7 service is established. The IUT received aframe with incorrect checksum, and the IUT's V(O) = 0.Check that the IUT uses the first time transmission procedure with a64 kbit/s frame format to transmit the next frames.DLC/U-Plane/Class0/TP0V-001ETS 300 434-1 [6], subclause B.4.3.2.1ETS 300 476-2 [10] Protocol ICS table A.28 item 1Only for an IUT, that transmits a stream of data frames after theestablishment of the LU7 service.Initial condition: The LU7 service is established. The IUT received aframe with incorrect checksum, and the IUT's V(O) = (Max. VOvalue - 8).Check that the IUT uses the 72 kbit/s frame format to transmit thenext frames.DLC/U-Plane/Class0/TP0V-002ETS 300 434-1 [6], subclause B.4.3.2.2ETS 300 476-2 [10] Protocol ICS table A.28 item 2Only for an IUT, that transmits a stream of data frames after theestablishment of the LU7 service.Initial condition: The LU7 service is established. The IUT received are-transmit request, and the IUT's V(O) < (Max. VO value).Check that the IUT re-transmits the requested frame with the sameframe speed format as the initial sending of this frame.DLC/U-Plane/Class0/TP0V-003ETS 300 434-1 [6], subclause B.4.3.2.4ETS 300 476-2 [10] Protocol ICS table A.28 item 4Only for an IUT, that transmits a stream of data frames after theestablishment of the LU7 service.Initial condition: The LU7 service is established. The IUT received64 kbit/s frames, and the IUT's V(O) = 0.Check that the IUT acknowledges the received frames bytransmitting a frame with N(R) set to the correct value.DLC/U-Plane/Class0/TP0V-004ETS 300 434-1 [6], subclause B.4.3.2.5ETS 300 476-2 [10] Protocol ICS table A.28 item 5Only for an IUT, that transmits a stream of data frames after theestablishment of the LU7 service.Initial condition: The LU7 service is established. The IUT received64 kbit/s frames, and the IUT's V(O) = 0.Check that the IUT treats the N(R) value contained in a receivedframe as an acknowledgement for all frames it has transmitted withan N(S) up to this value.SIST ETS 300 758-3:2000

Page 20ETS 300 758-3: April 19975.2Abstract test methodAs stated in ETS 300 497-5 [18], the ATM used for the DECT DLC layer is the remote embedded testmethod. The fragmentation and recombination of the CF and CS channels (subset of Lc entity) areconsidered as a part of the lower layer under the Point of Control and Observation (PCO).The DECT/ISDN IAP implies no modification for the definition and the use of the ATM.5.3Relevant test casesAll test cases defined for the test group "DLC/C-Plane/ClassA" in ETS 300 497-5 [18] are relevant for theprofile according to their own selection rules.All test cases defined for the test group "DLC/C-Plane/Lb" in ETS 300 497-5 [18] are relevant for theprofile according to their own selection rules.All test cases defined for the test group "DLC/U-Plane/Class0" in ETS 300 497-5 [18] are relevant for theprofile according to their own selection rules.5.4Additional test casesFor covering the new test purposes, the derived test cases are:-TC-0-BV-000;-TC-0-BV-001;-TC-0-BV-002;-TC-0-BV-003;-TC-0-BV-004.SIST ETS 300 758-3:2000

Page 21ETS 300 758-3: April 19976DECT MAC layer protocol6.1Additional test purposesFigure 3 shows the MAC Test Suite Structure (TSS) defined in ETS 300 497-1 [15] for the conformancetesting.MACConnectionless servicesDownlink servicesUplink servicesBroadcast servicesDownlink servicesPaging servicesNon-continous servicesBVCABVCABVCABVCABVCAC/O servicesBearer set-upConnection modificationBearer handoverBVCABVCACABearer releaseData transferBVCABVCALayer managementTest messagesBVCACABIFigure 3: TSS for DECT M
...

SLOVENSKI STANDARD
01-januar-2000
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH'(&7'LJLWDOQRRPUHåMH]
LQWHJULUDQLPLVWRULWYDPL,6'19]DMHPQRGHORYDQMH'(&7,6'1YREOLNLNRQþQHJD
VLVWHPD3URILOSUHVNXãHYDOQHVSHFLILNDFLMH376GHO3URILOSUHVNXãHYDOQH
VSHFLILNDFLMHRGYLVQHRGSURILOD3676]DILNVQRUDGLMVNR]DNOMXþLWHY)7
Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital
Network (ISDN); DECT/ISDN interworking for end system configuration; Profile Test
Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) for Fixed radio
Termination (FT)
Ta slovenski standard je istoveten z: ETS 300 758-3 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN ETS 300 758-3
TELECOMMUNICATION April 1997
STANDARD
Source: ETSI EP-DECT Reference: DE/DECT-040018-3
ICS: 33.020
Key words: DECT, ISDN, interworking, PTS, radio, testing, TTCN
Digital Enhanced Cordless Telecommunications (DECT);
Integrated Services Digital Network (ISDN);
DECT/ISDN interworking for end system configuration;
Profile Test Specification (PTS);
Part 3: Profile Specific Test Specification (PSTS)
for Fixed radio Termination (FT)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.

Page 2
ETS 300 758-3: April 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

Page 3
ETS 300 758-3: April 1997
Contents
Foreword .7
1 Scope .9
2 Normative references.9
3 Definitions and abbreviations .12
3.1 Definitions .12
3.2 Abbreviations .12
4 DECT NWK layer protocol .14
4.1 Additional test purposes.14
4.2 Abstract test method.14
4.3 Relevant test cases.15
4.4 Modified test cases .17
5 DECT DLC layer protocol.18
5.1 Additional test purposes.18
5.2 Abstract test method.20
5.3 Relevant test cases.20
5.4 Additional test cases.20
6 DECT MAC layer protocol .21
6.1 Additional test purposes.21
6.2 Abstract test method.22
6.3 Relevant test cases.22
6.4 Additional Test Cases.24
7 DECT Physical Layer (PHL) protocol .24
7.1 Additional Test Purposes.24
7.2 Abstract test method.24
7.3 Relevant test cases.24
8 ISDN protocols .25
8.1 Applicability of ATS .25
8.2 ISDN primary access protocols .25
8.2.1 Additional test purposes .25
8.2.2 Abstract test method .25
8.2.3 Relevant test cases.25
8.2.4 Additional selection expression .25
8.3 ISDN basic access protocols.26
8.3.1 Additional test purposes .26
8.3.2 Abstract test method .26
8.3.3 Relevant test cases.26
8.3.4 Additional selection expression .26
9 DECT GAP profile .26
9.1 Additional test purposes.26
9.2 Abstract test method.26
9.3 Relevant test cases.26
10 DECT/ISDN IAP profile .27
10.1 Profile test suite structure .27
10.1.1 Test groups .27
10.1.1.1 Protocol groups.28
10.1.1.1.1 The IWU procedures .28

Page 4
ETS 300 758-3: April 1997
10.1.1.1.2 The IWU mappings . 28
10.1.1.1.3 The profile specific NWK procedures . 28
10.1.1.1.4 The profile specific DLC procedures. 28
10.1.1.2 Main test groups. 28
10.1.1.2.1 Capability (CA) tests. 29
10.1.1.2.2 Valid Behaviour (BV) tests . 29
10.1.1.2.3 Inopportune Behaviour (BO) tests. 29
10.1.1.2.4 Invalid Behaviour (BI) tests . 29
10.2 Profile test purposes . 29
10.2.1 TP definition conventions. 29
10.2.2 TP naming conventions . 30
10.2.3 Sources of TP definitions. 30
10.2.4 Test purposes for call establishment procedures. 31
10.2.5 Test purposes for call information procedures . 32
10.2.6 Test purposes for call release procedures . 33
10.2.7 Test purposes for supplementary service specific procedures . 34
10.2.8 Test purposes for CISS functional protocol procedures. 38
10.2.9 Test purposes for CRSS functional protocol procedures . 39
10.2.10 Test purposes for CRSS keypad protocol procedures . 45
10.2.11 Test purposes for IWU messages mapping. 46
10.2.12 Test purposes for IWU management of call control protocol . 48
10.2.13 Test purposes for segmented messages . 48
10.3 Profile Abstract Test Method (ATM). 48
10.4 Profile Untestable test purposes . 49
10.5 Profile ATS Conventions . 49
10.5.1 Declarations part naming conventions. 50
10.5.1.1 Type and structured type definitions . 50
10.5.1.2 Operations definitions . 50
10.5.1.3 Parameter declarations. 50
10.5.1.4 Selection expression definitions. 50
10.5.1.5 Constant declarations . 50
10.5.1.6 Test suite variable declarations . 50
10.5.1.7 Test case variable declarations . 51
10.5.1.8 PCO declarations. 51
10.5.1.9 Timer declarations . 51
10.5.1.10 ASP type definitions . 51
10.5.1.11 PDU type definitions. 51
10.5.1.12 Alias definitions . 52
10.5.2 Constraints part naming conventions . 52
10.5.3 Dynamic part naming conventions. 52
10.5.3.1 Test Case identifier . 52
10.5.3.2 Test step identifier. 53
10.5.3.3 Default identifier . 53
10.5.3.4 General aspects. 53
10.5.3.5 ATS abbreviations. 53
10.5.4 Declaration part implementation conventions. 53
10.5.5 Constraint part implementation conventions . 54
10.5.6 Dynamic part implementation conventions. 54
10.5.7 Documentation implementation conventions. 55
10.6 Test case and test purpose mapping. 55
Annex A (normative): Profile Implementation eXtra Information for Testing (IXIT) proforma for
DECT/ISDN IAP profile - Fixed radio Termination (FT). 56
A.1 Identification summary. 56
A.2 ATS summary. 56
A.3 Test laboratory. 56
A.4 Client identification. 57
A.5 System Under Test (SUT) . 57

Page 5
ETS 300 758-3: April 1997
A.6 Profile information .58
Annex B (normative): Profile Conformance Test Report (Profile CTR) proforma for DECT/ISDN IAP
profile - Fixed radio Termination (FT).60
B.1 Identification summary .60
B.1.1 Protocol conformance test report.60
B.1.2 IUT identification .60
B.1.3 Testing environment .61
B.1.4 Limits and reservation.61
B.1.5 Comments .61
B.2 IUT conformance status.61
B.3 Static conformance summary.62
B.4 Dynamic conformance summary.62
B.5 Static conformance review report.62
B.6 Test campaign report .63
B.7 Observations .64
Annex C (normative): System Conformance Test Report proforma (SCTR) for DECT/ISDN IAP
profile - Fixed radio Termination (FT).65
C.1 Identification summary .65
C.1.1 System conformance test report.65
C.1.2 Test laboratory.65
C.1.3 Client identification.66
C.1.4 SUT.66
C.1.5 Profile identification.66
C.1.6 Nature of conformance testing.67
C.1.7 Limits and reservations.67
C.1.8 Record of agreement.67
C.1.9 Comments .68
C.2 System report summary for DECT/ISDN IAP FT .68
C.2.1 Profile testing summary for DECT NWK layer protocol.68
C.2.2 Profile testing summary for DECT DLC layer protocol .69
C.2.3 Profile testing summary for DECT MAC layer protocol.70
C.2.4 Profile testing summary for DECT PHL protocol .71
C.2.5 Profile testing summary for ISDN L3, L2, L1 primary access protocol .72
C.2.6 Profile testing summary for ISDN L3, L2, L1 basic access protocol.73
C.2.7 Profile testing summary for DECT GAP profile.74
C.2.8 Profile testing summary for DECT/ISDN IAP profile.75
Annex D (normative): Profile eXtra Requirement List (XRL) proforma for DECT/ISDN IAP profile -
Fixed radio Termination (FT).76
D.1 ISDN primary access protocols.76
D.2 ISDN basic access protocols .76
Annex E (normative): Modifications of the PCTR proforma related to DECT/ISDN IAP profile -
Fixed radio Termination (FT).77
E.1 Modifications of DECT NWK layer PCTR proforma.77
E.2 Modifications of DECT DLC layer PCTR proforma .80

Page 6
ETS 300 758-3: April 1997
E.3 Modifications of DECT MAC layer PCTR proforma. 82
E.4 Observations. 84
Annex F (normative): Abstract Test Suite (ATS) for DECT NWK layer conforming to DECT/ISDN
IAP profile - Fixed radio Termination (FT) . 85
F.1 The machine processable ATS (TTCN.MP). 85
F.2 The graphical ATS (TTCN.GR) . 85
Annex G (normative): Abstract Test Suite (ATS) for DECT DLC layer conforming to DECT/ISDN
IAP profile - Fixed radio Termination (FT) . 86
G.1 The machine processable ATS (TTCN.MP). 86
G.2 The graphical ATS (TTCN.GR) . 86
Annex H (normative): Abstract Test Suite (ATS) for DECT MAC layer conforming to DECT/ISDN
IAP profile - Fixed radio Termination (FT) . 87
H.1 The machine processable ATS (TTCN.MP). 87
H.2 The graphical ATS (TTCN.GR) . 87
Annex I (normative): Abstract Test Suite (ATS) - DECT/ISDN IAP - Fixed radio Termination (FT) . 88
I.1 The machine processable ATS (TTCN.MP). 88
I.2 The graphical ATS (TTCN.GR) . 88
History. 89

Page 7
ETS 300 758-3: April 1997
Foreword
This European Telecommunication Standard (ETS) has been produced by the Digital Enhanced Cordless
Telecommunications (DECT) Project of the European Telecommunications Standards Institute (ETSI).
This ETS consists of 3 parts as follows:
Part 1: "PTS - summary".
Part 2: "Profile Specific Test Specification (PSTS) for Portable radio Termination (PT)".
Part 3: "Profile Specific Test Specification (PSTS) for Fixed radio Termination (FT)".
Transposition dates
Date of adoption: 4 April 1997
Date of latest announcement of this ETS (doa): 31 July 1997
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 31 January 1998
Date of withdrawal of any conflicting National Standard (dow): 31 January 1998

Page 8
ETS 300 758-3: April 1997
Blank page
Page 9
ETS 300 758-3: April 1997
1 Scope
This European Telecommunication Standard (ETS) contains the test specification for Digital Enhanced
Cordless Telecommunications/Integrated Services Digital Network (DECT/ISDN) Interworking Access
Profile (IAP) Fixed Part (FP) applications as specified in ETS 300 434-1 [6] and ETS 300 434-2 [7].
This test specification provides conformance tests for DECT/ISDN terminal equipment conforming to
ETS 300 434-1 [6] and ETS 300 434-2 [7]. The main objective is to perform a high probability of inter-
operability between the DECT/ISDN terminal equipment and an ISDN network. The DECT/ISDN terminal
equipment contains Fixed Part and Portable Parts that may be supplied by different manufacturers.
The ISO standard for the methodology of conformance testing ISO/IEC 9646 [22] to [28] is used as the
basis for the test methodology, and as the basis for test case specification.
The test cases if listed in this ETS have been derived from the corresponding Abstract Test Suite (ATS).
Additional DECT/ISDN IAP specific test cases are included where required.
Annex A provides Profile Implementation eXtra Information for Testing (IXIT) proforma part of this
specification.
Annex B provides Profile Conformance Test Report (Profile CTR) proforma part of this specification.
Annex C provides System Conformance Test Report proforma (SCTR) part of this specification.
Annex D provides the Profile IXIT Requirements List (XRL) proforma part of this specification.
Annex E provides modifications of DECT layer Protocol Conformance Test Report (PCTR) proforma of
this specification.
Annex F provides the Tree and Tabular Combined Notation (TTCN) part for DECT Network (NWK) layer
conforming to the requirements of this specification.
Annex G provides the Tree and Tabular Combined Notation (TTCN) part for DECT Data Link Control
(DLC) layer conforming to the requirements of this specification.
Annex H provides the Tree and Tabular Combined Notation (TTCN) part for DECT MAC layer conforming
to the requirements of this specification.
Annex I provides the Tree and Tabular Combined Notation (TTCN) part for DECT/ISDN Interworking Unit
(IWU) - IAP profile.
2 Normative references
[1] ETS 300 175-2: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical
Layer".
[2] ETS 300 175-3: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium
Access Control (MAC) layer".
[3] ETS 300 175-4: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data
Link Control (DLC) layer".
[4] ETS 300 175-5: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network
(NWK) layer".
[5] ETS 300 444 (1995): "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Generic Access Profile (GAP)".

Page 10
ETS 300 758-3: April 1997
[6] ETS 300 434-1: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT) and Integrated Services Digital Network
(ISDN) interworking for end system configuration; Part 1: Interworking
specification".
[7] ETS 300 434-2: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT) and Integrated Services Digital Network
(ISDN) interworking for end system configuration; Part 2: Access profile".
[8] ETS 300 176: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Approval test specification".
[9] ETS 300 476-4: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Protocol
Implementation Conformance Statement (PICS) proforma; Part 4: Network
(NWK) layer - Fixed radio Termination (FT)".
[10] ETS 300 476-5: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Protocol
Implementation Conformance Statement (PICS) proforma; Part 5: Data Link
Control (DLC) layer - Fixed radio Termination (FT)".
[11] ETS 300 476-6: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Protocol
Implementation Conformance Statement (PICS) proforma; Part 6: Medium
Access Control (MAC) layer - Fixed radio Termination (FT)".
[12] ETS 300 476-7: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Protocol
Implementation Conformance Statement (PICS) proforma; Part 7: Physical
layer".
[13] ETS 300 474-2: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
requirement list and profile specific Implementation Conformance Statement
(ICS) proforma; Part 2: Fixed radio Termination (FT)"
[14] ETS 300 705-2: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications/Integrated Services Digital Network
(DECT/ISDN) interworking for end system configuration; Profile Implementation
Conformance Statement (ICS); Part 2: Fixed radio Termination (FT)".
[15] ETS 300 497-1: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI) Test Case
Library (TCL); Part 1: Test Suite Structure (TSS) and Test Purposes (TP) for
Medium Access Control (MAC) layer".
[16] ETS 300 497-3: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI) Test Case
Library (TCL); Part 3: Abstract Test Suite (ATS) for Medium Access Control
(MAC) layer - Fixed radio Termination (FT)".
[17] ETS 300 497-4: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI) Test Case
Library (TCL); Part 4: Test Suite Structure (TSS) and Test Purposes (TP) - Data
Link Control (DLC) layer".
[18] ETS 300 497-5: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI) Test Case
Library (TCL); Part 5: Abstract Test Suite (ATS) - Data Link Control (DLC)
layer".
Page 11
ETS 300 758-3: April 1997
[19] ETS 300 497-8: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI) Test Case
Library (TCL); Part 8: Test Suite Structure (TSS) and Test Purposes (TP) -
Network (NWK) layer - Fixed radio Termination (FT)".
[20] ETS 300 497-9: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI) Test Case
Library (TCL); Part 9: Abstract Test Suite (ATS) for Network (NWK) layer - Fixed
radio Termination (FT)".
[21] ETS 300 494-3: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) -
Fixed radio Termination (FT)".
[22] ISO/IEC 9646-1 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 1:
General concepts". (See also CCITT Recommendation X.290 (1991)).
[23] ISO/IEC 9646-2 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 2:
Abstract test suite specification". (See also CCITT Recommendation X.291
(1991)).
[24] ISO/IEC 9646-3 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 3:
The tree and tabular combined notation". (See also CCITT Recommendation
X.292 (1992)).
[25] ISO/IEC 9646-4 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 4:
Test realisation". (See also CCITT Recommendation X.292 (1992)).
[26] ISO/IEC 9646-5 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 5:
Requirements on test laboratories and clients for the conformance assessment
process". (See also CCITT Recommendation X.292 (1992)).
[27] ISO/IEC 9646-6 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 6:
Protocol profile test specification".
[28] ISO/IEC 9646-7 (1995): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 7:
Implementation Conformance Statements".
[29] ETS 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber
Signalling System No. one (DSS1) protocol; Signalling network layer for circuit-
mode basic call control; Part 1: Protocol specification [ITU-T Recommendation
Q.931 (1993), modified]".
[30] ETS 300 403-3: "Integrated Services Digital Network (ISDN); Digital Subscriber
Signalling System No. one (DSS1) protocol; Signalling network layer for circuit-
mode basic call control; Part 3: Protocol Implementation Conformance
Statement (PICS) proforma specification".
[31] ETS 300 402-2: "Integrated Services Digital Network (ISDN); Digital Subscriber
Signalling System No. one (DSS1) protocol; Data link layer; Part 2: General
protocol specification [ITU-T Recommendation Q.921 (1993), modified]".

Page 12
ETS 300 758-3: April 1997
[32] ETS 300 402-4: "Integrated Services Digital Network (ISDN); Digital Subscriber
Signalling System No. one (DSS1) protocol; Data link layer; Part 4: Protocol
Implementation Conformance Statement (PICS) proforma specification for the
general protocol".
[33] ETS 300 011 (1992): "Integrated Services Digital Network (ISDN); Primary rate
user-network interface; Layer 1 specification and test principles".
[34] ETS 300 011/A2: "Amendment 2 to ETS 300 011 (1992), adding a SCS, a PICS
and a PIXIT for interface points I and I ".
a b
[35] ETS 300 012 (1992): "Integrated Services Digital Network (ISDN); Basic user-
network interface; Layer 1 specification and test principles".
[36] ETS 300 012/A2: "Amendment 2 to ETS 300 012 (1992), adding a SCS, a PICS
and a PIXIT for interface points I and I ".
a b
[37] TBR 3: "Integrated Services Digital Network (ISDN); Attachment requirements
for terminal equipment to connect to an ISDN using ISDN basic access".
[38] TBR 4: "Integrated Services Digital Network (ISDN); Attachment requirements
for terminal equipment to connect to an ISDN using ISDN primary rate access".
[39] TBR 22: "Radio Equipment and Systems (RES); Attachment requirements for
terminal equipment for Digital Enhanced Cordless Telecommunications (DECT)
Generic Access Profile (GAP) applications".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this ETS, the following terms and definitions apply:
a) the terms defined in ISO/IEC 9646-7 [28]; and
b) the definitions in ETS 300 434-1 [6] and ETS 300 434-2 [7].
3.2 Abbreviations
For the purposes of this ETS, the abbreviations defined in ISO/IEC 9646-1 [22], ISO/IEC 9646-6 [27],
ISO/IEC 9646-7 [28], the abbreviations defined in ETS 300 434-1 [6] and ETS 300 434-2 [7] apply. In
particular, the following abbreviations apply:
ASP Abstract Service Primitive
ATM Abstract Test Method
ATS Abstract Test Suite
BI Invalid Behaviour
BO Inopportune Behaviour
BV Valid Behaviour
CA Capability tests
CC Call Control
CI Common Interface
CISS Call Independent Supplementary Services
CP Co-ordination Point
CTR Conformance Test Report
DECT Digital Enhanced Cordless Telecommunications
DLC Data Link Control
DFS DECT Fixed System
DPS DECT Portable System
FT Fixed radio Termination
GAP Generic Access Profile
ICS Implementation Conformance Statement
IE Information Element
Page 13
ETS 300 758-3: April 1997
ISDN Integrated Services Digital Network
IUT Implementation Under Test
IXIT Implementation eXtra Information for Testing
IWP Interworking Profile
IWU Interworking Unit
LCE Link Control Entity
LT Lower Tester
LTS Local Test Step
MAC Medium Access Control layer
MM Mobility Management entity
MTC Master Test Component
NWK Network
PCO Point of Control and Observation
PCTR Protocol Conformance Test Report
PDU Protocol Data Unit
PHL Physical Layer
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
PSTS Profile Specific Test Specification
PT Portable radio Termination
PTC Parallel Test Component
PTS Profile Test Specification
RL Requirements List
SDU Service Data Unit
SCS System Conformance Statement
SCTR System Conformance Test Report
SUT System Under Test
TP Test Purpose
TSS Test Suite Structure
TTCN Tree and Tabular Combined Notation
UT Upper Tester
XRL IXIT Requirements list
Page 14
ETS 300 758-3: April 1997
4 DECT NWK layer protocol
4.1 Additional test purposes
Figure 1 shows the NWK Test Suite Structure (TSS) defined in ETS 300 497-8 [19] for the conformance
testing.
CC IT
NWK
CA
BV OC
IC
BO
BI CI
TI CR
SC
PM
RS
IT
MM
CA
BV ID
BO AU
BI LO
AR
TI
KA
PR
CH
ME
BV
BO
LC BV
LE
BI
LR
LS
TI
LL
IS
BV
MO
ML
BV
Figure 1: NWK TSS
All test purposes for Call Control (CC) entity of the NWK layer as specified in ETS 300 497-8 [19] apply
with no required addition.
All test purposes for Link Control Entity (LCE) of the NWK layer as specified in ETS 300 497-8 [19] apply
with no required addition.
All test purposes for Call Independent Supplementary Services (CISS) entity of the NWK layer as
specified in ETS 300 497-8 [19] apply with no required addition.
4.2 Abstract test method
As stated in ETS 300 497-9 [20], the Abstract Test Method (ATM) used for the DECT NWK layer is the
remote embedded test method.
The DECT/ISDN IAP implies no modification for the definition and the use of the ATM.

Page 15
ETS 300 758-3: April 1997
4.3 Relevant test cases
The test cases defined for the test group "FT/CC/BV/OC" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_CC_BV_OC_01;
- TC_FT_CC_BV_OC_02;
- TC_FT_CC_BV_OC_03;
- TC_FT_CC_BV_OC_04;
- TC_FT_CC_BV_OC_05.
The test cases defined for the test group "FT/CC/BV/IC" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_CC_BV_IC_01;
- TC_FT_CC_BV_IC_02.
The test cases defined for the test group "FT/CC/BV/CI" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_CC_BV_CI_01;
- TC_FT_CC_BV_CI_02;
- TC_FT_CC_BV_CI_03;
- TC_FT_CC_BV_CI_04;
- TC_FT_CC_BV_CI_05;
- TC_FT_CC_BV_CI_06;
- TC_FT_CC_BV_CI_07;
- TC_FT_CC_BV_CI_08;
- TC_FT_CC_BV_CI_09;
- TC_FT_CC_BV_CI_10.
The test cases defined for the test group "FT/CC/BV/CR" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_CC_BV_CR_01;
- TC_FT_CC_BV_CR_02;
- TC_FT_CC_BV_CR_03;
- TC_FT_CC_BV_CR_04;
- TC_FT_CC_BV_CR_05;
- TC_FT_CC_BV_CR_06;
- TC_FT_CC_BV_CR_07;
- TC_FT_CC_BV_CR_08;
- TC_FT_CC_BV_CR_09;
- TC_FT_CC_BV_CR_10;
- TC_FT_CC_BV_CR_11;
- TC_FT_CC_BV_CR_12.
The test cases defined for the test group "FT/CC/BV/RS" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_CC_BV_RS_07.
The test cases defined for the test group "FT/CC/BV/BO" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_CC_BV_BO_01;
- TC_FT_CC_BV_BO_02.
Page 16
ETS 300 758-3: April 1997
The test cases defined for the test group "FT/CC/BI" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_CC_BI_01;
- TC_FT_CC_BI_02;
- TC_FT_CC_BI_03;
- TC_FT_CC_BI_04.
The test cases defined for the test group "FT/CC/TI" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_CC_TI_01;
- TC_FT_CC_TI_02;
- TC_FT_CC_TI_03;
- TC_FT_CC_TI_04.
The test cases defined for the test group "FT/LC/BV/LE" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_LC_BV_LE_01;
- TC_FT_LC_BV_LE_02;
- TC_FT_LC_BV_LE_03.
The test cases defined for the test group "FT/LC/BV/LR" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_LC_BV_LR_01;
- TC_FT_LC_BV_LR_02;
- TC_FT_LC_BV_LR_03;
- TC_FT_LC_BV_LR_04.
The test cases defined for the test group "FT/LC/BI" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_LC_BI_01;
- TC_FT_LC_BI_03;
- TC_FT_LC_BI_04;
- TC_FT_LC_BI_05;
- TC_FT_LC_BI_06;
- TC_FT_LC_BI_07.
The test cases defined for the test group "FT/LC/TI" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_LC_TI_02;
- TC_FT_LC_TI_03.
The test cases defined for the test group "FT/IS/BV" in ETS 300 497-9 [20] relevant for the profile
according to their own selection rules are:
- TC_FT_IS_BV_01;
- TC_FT_IS_BV_02;
- TC_FT_IS_BV_03.
Page 17
ETS 300 758-3: April 1997
4.4 Modified test cases
Test cases, in witch the following call control messages can be received and sent, are considered as
modified test cases due to the new format of these messages:
- CC-SETUP;
- CC-INFO;
- CC-ALERTING;
- CC-CONNECT;
- CC-RELEASE;
- CC-RELEASE-COM.
The new format of these messages implies a set of modified TTCN constraint.
Test cases, in witch the following call control messages can be sent, are considered as modified test
cases due to the new format of these messages:
- CC-SETUP-ACK;
- CC-CALL-PROC;
- CC-CONNECT-ACK.
The new format of these messages implies a set of modified TTCN constraint.
Test cases, in witch the following CISS messages can be received and sent, are considered as modified
test cases due to the new format of these messages:
- FACILITY-ciss;
- CISS-REGISTER;
- CISS-RELEASE-COM.
The new format of these messages implies a set of modified TTCN constraint.
Test cases, in witch the following CISS messages can be sent, are considered as modified test cases due
to the new format of these messages:
- HOLD-REJECT;
- RETRIEVE-REJECT.
The new format of these messages implies a set of modified TTCN constraint.
Test cases, in witch some messages use the following information elements, are considered as modified
test cases due to the new value range of some fields:
- Call attributes;
- IWU-to-IWU;
- Progress indicator.
The new value range of the fields of these information elements implies a set of modified TTCN
constraint.
Test cases, in witch the CC_02 timer is used, are considered as modified test cases due to the new value
of this timer.
The value of the CC_02 timer (changed from 30s to 36s) shall be updated by modifying the associated
test suite parameter.
Page 18
ETS 300 758-3: April 1997
5 DECT DLC layer protocol
5.1 Additional test purposes
Figure 2 shows the Data Link Control Test Suite Structure (TSS) defined in ETS 300 497-4 [17] for the
conformance testing.
DLC
C-plane CA
Class U
BV
BO
BI
Class A CA
BV
BO
BI
Class B
CA
BV
BO
BI
Lb CA
BV
BO
BI
U-plane
Class 0
CA
BV
BO
BI
CA
Class 1
BV
BO
BI
CA
Class 2
BV
BO
BI
Class 3 CA
BV
BO
BI
Figure 2: DLC TSS
Additional test purposes for LU7 are added in the functional module "Class 0" and in the corresponding
standard main test group CA, BV, BO and BI.
According to the Test Purpose (TP) naming convention and the existing TP defined in
ETS 300 497-4 [17], the identifier to use for the first additional test purpose is "DLC/U-
Plane/Class0/TP0V–000".
Page 19
ETS 300 758-3: April 1997
ETS 300 434-1 [6], subclause B.4.3.2.1
DLC/U-Plane/Class0/TP0V-000
ETS 300 476-2 [10] Protocol ICS table A.28 item 1
Only for an Implementation Under Test (IUT), that transmits a
stream of data frames after the establishment of the LU7 service.
Initial condition: The LU7 service is established. The IUT received a
frame with incorrect checksum, and the IUT's V(O) = 0.
Check that the IUT uses the first time transmission procedure with a
64 kbit/s frame format to transmit the next frames.
ETS 300 434-1 [6], subclause B.4.3.2.1
DLC/U-Plane/Class0/TP0V-001
ETS 300 476-2 [10] Protocol ICS table A.28 item 1
Only for an IUT, that transmits a stream of data frames after the
establishment of the LU7 service.
Initial condition: The LU7 service is established. The IUT received a
frame with incorrect checksum, and the IUT's V(O) = (Max. VO
value - 8).
Check that the IUT uses the 72 kbit/s frame format to transmit the
next frames.
DLC/U-Plane/Class0/TP0V-002 ETS 300 434-1 [6], subclause B.4.3.2.2
ETS 300 476-2 [10] Protocol ICS table A.28 item 2
Only for an IUT, that transmits a stream of data frames after
...