SIST EN 1367-5:2002

Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock

This European Standard specifies methods for the determination of resistance to thermal shock of aggregates.

Prüfverfahren für thermische Eigenschaften und Verwitterungsbeständigkeit von Gesteinskörnungen - Teil 5: Bestimmung des Widerstandes gegen Hitzebeanspruchung

Diese Europäische Norm legt Verfahren für die Bestimmung des Widerstands gegen Hitzebeanspruchung von Gesteinskörnungen fest.

Essais pour déterminer les propriétés thermiques et l'altérabilité des granulats - Partie 5 : Détermination de la résistance au choc thermique

La présente Norme européenne spécifie les méthodes permettant de déterminer la résistance au choc thermique des granulats chauffés et séchés lors de la production des mélanges hydrocarbonés a chaud.

Preskusi lastnosti agregatov zaradi termičnih in vremenskih vplivov - 5. del: Določevanje odpornosti proti temperaturnemu šoku

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2002
• Withdrawal Date: 01-Feb-2011
• ICS: 91.100.15 - Mineral materials and products
• Technical Committee: AGR - Aggregates
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 02-Feb-2011
• Due Date: 25-Feb-2011
• Completion Date: 02-Feb-2011
• Directive: 89/106/EEC - Construction products
• Mandate: M/125 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on aggregates
• Ref Project: EN 1367-5:2002 - Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock

Relations

• Replaced By: SIST EN 1367-5:2011 - Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
• Effective Date: 01-Mar-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für thermische Eigenschaften und Verwitterungsbeständigkeit von Gesteinskörnungen - Teil 5: Bestimmung des Widerstandes gegen HitzebeanspruchungEssais pour déterminer les propriétés thermiques et l'altérabilité des granulats - Partie 5 : Détermination de la résistance au choc thermiqueTests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 1367-5:2002SIST EN 1367-5:2002en01-december-2002SIST EN 1367-5:2002SLOVENSKI
STANDARD



SIST EN 1367-5:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1367-5August 2002ICS 91.100.15; 93.080.20English versionTests for thermal and weathering properties of aggregates - Part5: Determination of resistance to thermal shockEssais pour déterminer les propriétés thermiques etl'altérabilité des granulats - Partie 5: Détermination de larésistance au choc thermiquePrüfverfahren für thermische Eigenschaften undVerwitterungsbeständigkeit von Gesteinskörnungen - Teil 5:Bestimmung des Widerstandes gegen HitzebeanspruchungThis European Standard was approved by CEN on 10 May 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1367-5:2002 ESIST EN 1367-5:2002



EN 1367-5:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Principle.45Apparatus.56Sampling.77Procedure.78Calculation and expression of results.89Test report.8SIST EN 1367-5:2002



EN 1367-5:2002 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 154 "Aggregates", the secretariat ofwhich is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2003, and conflicting national standards shall be withdrawn at the latestby December 2003.This standard forms part of a series of tests for thermal and weathering properties of aggregates. Test methods forother properties of aggregates will be covered by parts of the following European Standards:EN 932Tests for general properties of aggregates.EN 933Tests for geometrical properties of aggregates.EN 1097Tests for mechanical and physical properties of aggregates.EN 1744Tests for chemical properties of aggregates.EN 13179Tests for filler aggregate used in bituminous mixtures.The other parts of EN 1367 will be:Part 1: Determination of resistance to freezing and thawing.Part 2: Magnesium sulfate test.Part 3: Boiling test for “Sonnenbrand basalt”.Part 4: Determination of drying shrinkage.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countriesare bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France,Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.SIST EN 1367-5:2002



EN 1367-5:2002 (E)41 ScopeThis European Standard specifies methods for the determination of resistance to thermal shock of aggregates,subject to heating and drying in the production of hot bituminous mixtures.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 932-1, Tests for general properties of aggregates — Part 1: Methods for sampling.EN 932-5, Tests for general properties of aggregates — Part 5: Common equipment and calibration.EN 933-2, Tests for geometrical properties of aggregates — Part 2: Determination of particle sizedistribution – Test sieves, nominal size of apertures.EN 1097-2:1998, Tests for mechanical and physical properties of aggregates — Part 2: Methods for thedetermination of resistance to fragmentation.3 Terms and definitionsFor the purposes of this European Standard the following terms and definitions apply.3.1thermal shockchange in physical properties of aggregates subjected to 700 °C environment for a 3 min int
...