SIST EN 301 908-5 V3.2.1:2008
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 5: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 5: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
In addition to Release 2, the third Release of the EN will cover also operation in the 900 MHz band, the 1800 MHz band and the 2600 MHz band. It will cover as well small modifications and enhancements according to the source specifications. Requirements on repeaters will be removed as there is a separate part 12 on cdma2000 repeaters in release 3 of EN 301 908
Base stations for IMT-2000 CDMA multi-carrier (cdma2000) may support:
1) operation in cdma2000 spread spectrum systems as defined in TIA-2000.2 [5], referred to herein as operation in Type 1 cdma2000 systems; or
2) operation in cdma2000 High Rate Packet Data Systems as defined in TIA-856 [11], referred to herein in Type 2 cdma2000 systems. The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2, which states that "[…] radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS), ponavljalniki (repetitorji) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 5. del: Harmonizirani EN za IMT-2000, CDMA “Multi-Carrier” (CDMA2000) (BS), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 908-5 V3.2.1:2008
01-marec-2008
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50 %D]QH
SRVWDMH %6 SRQDYOMDOQLNL UHSHWLWRUML LQXSRUDEQLãNDRSUHPD 8( ]DFHOLþQD
RPUHåMDWUHWMHJHQHUDFLMH,07GHO +DUPRQL]LUDQL(1]D,07&'0$
³0XOWL&DUULHU´ &'0$ %6 NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH
5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS),
Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks -
Part 5: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS) covering
essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 908-5 Version 3.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 908-5 V3.2.1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 908-5 V3.2.1:2008
---------------------- Page: 2 ----------------------
SIST EN 301 908-5 V3.2.1:2008
ETSI EN 301 908-5 V3.2.1 (2007-09)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 5: Harmonized EN for IMT-2000,
CDMA Multi-Carrier (cdma2000) (BS)
covering essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 3 ----------------------
SIST EN 301 908-5 V3.2.1:2008
2 ETSI EN 301 908-5 V3.2.1 (2007-09)
Reference
REN/ERM-TFES-003-5
Keywords
3G, 3GPP2, cdma2000, cellular, digital,
MT-2000, mobile, radio, regulation, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2007.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 908-5 V3.2.1:2008
3 ETSI EN 301 908-5 V3.2.1 (2007-09)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .7
1 Scope.8
2 References.8
3 Definitions, symbols and abbreviations .9
3.1 Definitions.9
3.2 Symbols.18
3.3 Abbreviations.21
4 Technical requirements specifications .22
4.1 Environmental profile.22
4.2 Conformance requirements.22
4.2.1 Introduction.22
4.2.2 Transmitter conducted spurious emissions .23
4.2.2.1 Definition.23
4.2.2.2 Limits.23
4.2.2.3 Conformance.25
4.2.3 Maximum output power.25
4.2.3.1 Definition.25
4.2.3.2 Limits.25
4.2.3.2.1 Base stations operating in Type 1 cdma2000 systems.25
4.2.3.2.2 Base stations operating in Type 2 cdma2000 systems.26
4.2.3.3 Conformance.26
4.2.4 Inter-base station transmitter intermodulation .26
4.2.4.1 Definition.26
4.2.4.2 Limits.26
4.2.4.3 Conformance.26
4.2.5 Receiver conducted spurious emissions.27
4.2.5.1 Definition.27
4.2.5.2 Limits.27
4.2.5.3 Conformance.27
4.2.6 Receiver blocking characteristics .27
4.2.6.1 Definition.27
4.2.6.2 Limits.27
4.2.6.2.1 Base stations operating in Type 1 cdma2000 systems.27
4.2.6.2.2 Base stations operating in Type 2 cdma2000 systems.27
4.2.6.3 Conformance.27
4.2.7 Intermodulation spurious response attenuation.28
4.2.7.1 Definition.28
4.2.7.2 Limits.28
4.2.7.2.1 Base stations operating in Type 1 cdma2000 systems.28
4.2.7.2.2 Base stations operating in Type 2 cdma2000 systems.28
4.2.7.3 Conformance.28
4.2.8 Adjacent channel selectivity .28
4.2.8.1 Definition.28
4.2.8.2 Limits.28
4.2.8.2.1 Base stations operating in Type 1 cdma2000 systems.28
4.2.8.2.2 Base stations operating in Type 2 cdma2000 systems.28
4.2.8.3 Conformance.28
5 Testing for compliance with technical requirements.29
5.1 Conditions for testing .29
5.1.1 Introduction.29
5.1.2 Standard equipment under test.29
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 908-5 V3.2.1:2008
4 ETSI EN 301 908-5 V3.2.1 (2007-09)
5.1.2.1 Basic equipment.29
5.1.2.2 Ancillary equipment.29
5.2 Interpretation of the measurement results .29
5.3 Essential radio test suites.30
5.3.1 Transmitter conducted spurious emissions .30
5.3.1.1 Test procedure for base stations supporting operation in Type 1 cdma2000 systems.30
5.3.1.2 Test procedure for base stations supporting operation in Type 2 cdma2000 systems.30
5.3.2 Maximum output power.31
5.3.2.1 Test procedure for base stations supporting operation in Type 1 cdma2000 systems.31
5.3.2.2 Test procedure for base stations supporting operation in Type 2 cdma2000 systems.31
5.3.3 Inter-base station transmitter intermodulation .32
5.3.3.1 Test procedure for base stations supporting operation in Type 1 cdma2000 systems.32
5.3.3.2 Test procedure for base stations supporting operation in Type 2 cdma2000 systems 2.32
5.3.4 Receiver conducted spurious emissions.33
5.3.4.1 Test procedure for base stations supporting operation in Type 1 or Type 2 cdma2000 systems .33
5.3.5 Receiver blocking characteristics .34
5.3.5.1 Test procedure for base stations supporting operation in Type 1 cdma2000 systems.34
5.3.5.2 Test procedure for base stations supporting operation in Type 2 cdma2000 systems.35
5.3.6 Intermodulation spurious response attenuation.35
5.3.6.1 Test procedure for base stations supporting operation in Type 1 cdma2000 systems.35
5.3.6.2 Test procedure for base stations supporting operation in Type 2 cdma2000 systems.36
5.3.7 Adjacent channel selectivity .36
5.3.7.1 Test procedure for base stations supporting operation in Type 1 cdma2000 systems.36
5.3.7.2 Test procedure for base stations supporting operation in Type 2 cdma2000 systems.37
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).38
Annex B (normative): Base station Configurations .40
B.1 Receiver diversity.40
B.2 Duplexers.40
B.3 Power supply options .40
B.4 Ancillary RF amplifiers.41
B.5 BS using antenna arrays .41
B.5.1 Receiver tests.42
B.5.2 Transmitter tests .42
Annex C (informative): Environmental profile and standard test conditions .43
C.1 Introduction.43
C.2 CDMA environmental requirements.43
C.2.1 Temperature and power supply voltage.43
C.2.1.1 Definition.43
C.2.1.2 Method of measurement.43
C.2.1.3 Minimum standard.44
C.2.2 High humidity.44
C.2.2.1 Definition.44
C.2.2.2 Method of measurement.44
C.2.2.3 Minimum standard.44
C.3 Standard test conditions.45
C.3.1 Standard environmental test conditions.45
C.3.2 Standard conditions for the primary power supply.45
C.3.2.1 General.45
C.3.2.2 Standard DC test voltage from accumulator batteries.45
C.3.2.3 Standard AC voltage and frequency .45
Annex D (informative): The EN title in the official languages .46
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 908-5 V3.2.1:2008
5 ETSI EN 301 908-5 V3.2.1 (2007-09)
Annex E (informative): Bibliography.48
History .49
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 908-5 V3.2.1:2008
6 ETSI EN 301 908-5 V3.2.1 (2007-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The present document is part 5 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 10: "Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive".
ETSI
---------------------- Page: 8 ----------------------
SIST EN 301 908-5 V3.2.1:2008
7 ETSI EN 301 908-5 V3.2.1 (2007-09)
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 24 August 2007
Date of latest announcement of this EN (doa): 30 November 2007
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 May 2008
Date of withdrawal of any conflicting National Standard (dow): 31 May 2009
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 (see bibliography).
ETSI
---------------------- Page: 9 ----------------------
SIST EN 301 908-5 V3.2.1:2008
8 ETSI EN 301 908-5 V3.2.1 (2007-09)
1 Scope
The present document applies to the following radio equipment types:
• Base stations for IMT-2000 CDMA multi-carrier (cdma2000).
These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1.
Table 1: CDMA multi-carrier base station service frequency bands
Direction of transmission CDMA multi-carrier base station service Band Class (BC)
frequency bands
Transmit 2 110 MHz to 2 170 MHz
6
Receive 1 920 MHz to 1 980 MHz
Transmit 1 805 MHz to 1 880 MHz
8
Receive 1 710 MHz to 1 785 MHz
Transmit 925 MHz to 960 MHz
9
Receive 880 MHz to 915 MHz
Transmit 2 620 MHz to 2 690 MHz
13
Receive 2 500 MHz to 2 570 MHz
Base stations for IMT-2000 CDMA multi-carrier (cdma2000) may support:
1) operation in cdma2000 spread spectrum systems as defined in TIA-2000.2 [5], referred to herein as operation
in Type 1 cdma2000 systems; or
2) operation in cdma2000 High Rate Packet Data Systems as defined in TIA-856 [11], referred to herein in
Type 2 cdma2000 systems.
The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2,
which states that "[…] radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org/.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
ETSI
---------------------- Page: 10 ----------------------
SIST EN 301 908-5 V3.2.1:2008
9 ETSI EN 301 908-5 V3.2.1 (2007-09)
[2] Void.
[3] void.
[4] ANSI/TIA-97-F-1 (June 2006): "Recommended Minimum Performance Standard for cdma2000
Spread Spectrum Base Stations".
[5] TIA-2000.2-D-1 (January 2006): "Physical Layer Standard for cdma2000 Spread Spectrum
Systems - Addendum 1".
[6] ANSI/TIA-98-F-1 (June 2006): "Recommended Minimum Performance Standards for cdma2000
Spread Spectrum Mobile Stations - Addendum".
[7] ANSI/TIA/EIA-126-D-2001 (June 2001): "Loopback Service Option (LSO) for cdma Spread
Spectrum Systems".
[8] TIA-870-A (March 2005): "Test Data Service Option (TDSO) for cdma2000 Spread Spectrum
Systems - Revision A".
[9] TIA/EIA/IS-871 (April 2001): "Markov Service Option (MSO) for cdma2000 Spread Spectrum
Systems".
[10] void.
[11] TIA-856-A-1[E] (February 2007): "cdma2000 High Rate Packet Data Air Interface Specification -
Addendum 1".
[12] TIA-864-A (January 2006): "Recommended Minimum Performance Standards for cdma2000 High
Rate Packet Data Access Network Equipment".
[13] TIA-890-1[E] (January 2004): "Test Application Specification (TAS) for High Rate Packet Data
Air Interface, Addendum 1".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following
apply:
1X: mode of operation of a base station or access network using spreading rate 1
1XDO: mode of operation of a base station or access network using spreading rate 1 in data optimized systems
3X: mode of operation of a base station using spreading rate 3
access attempt: sequence of one or more access probe sequences on the access channel or enhanced access channel
containing the same message
NOTE: See also access probe, access probe sequence, and enhanced access probe.
access channel: reverse CDMA channel used by mobile stations for communicating to the base station
NOTE: The access channel is used for short signalling message exchanges, such as call originations, responses to
pages, and registrations. The access channel is a slotted random access channel.
access channel preamble: preamble of an access probe consisting of a sequence of all-zero frames that is sent at the
4 800 bit/s rate
ETSI
---------------------- Page: 11 ----------------------
SIST EN 301 908-5 V3.2.1:2008
10 ETSI EN 301 908-5 V3.2.1 (2007-09)
access network: network equipment providing data connectivity between a packet switched data network (typical
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.