SIST EN 301 908-7 V3.2.1:2007

Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive

The present document applies to the following radio equipment type:
• Base stations for IMT-2000 CDMA TDD (UTRA TDD).
The requirements in the present document apply to both Wide Area Base Stations and Local Area Base Stations unless otherwise stated. IMT-2000 CDMA TDD (UTRA TDD) supports two options of the TDD mode with the chip rates of 3,84 Mchip/s and 1,28 Mchip/s. These two options are called the 3,84 Mcps TDD option and the 1,28 Mchip/s TDD option respectively.
The requirements are listed in different subsections only if the parameters deviate. The present document covers requirements for 3,84 Mcps TDD option Base Station for Releases 99, 4, 5, 6 and 7 and for 1,28 Mcps TDD option Base Stations for Releases 4, 5, 6 and 7.
For general purpose Base Stations of Releases 99 and 4 only the requirements for Wide Area Base Stations shall apply. The present document is intended to cover the provisions of Directive 1999/5/EC [1] (R&TTE Directive) article 3.2, which states that "[…] radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS), ponavljalniki (repetitorji) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 7. del: Harmonizirani EN za IMT-2000, CDMA TDD (UTRA TDD) (BS), ki zajema bistvene zahteve člena 3.2 direktive R&TTEs

General Information

• Status: Published
• Publication Date: 05-Nov-2007
• ICS: 33.060.99 - Other equipment for radiocommunications
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 30-Oct-2007
• Due Date: 04-Jan-2008
• Completion Date: 06-Nov-2007
• Directive: 1999/5/EC - Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
• Mandate: M/284
• Ref Project: ETSI EN 301 908-7 V3.2.1 (2007-05) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive

Relations

• Official Journal Project Relation: SIST EN 301 908-7 V2.2.1:2004 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
• Effective Date: 25-Jan-2010
• Official Journal Project Relation: SIST EN 301 908-7 V2.2.2:2005 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
• Effective Date: 25-Jan-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 908-7 V3.2.1:2007
01-december-2007
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50%D]QH
SRVWDMH%6SRQDYOMDOQLNLUHSHWLWRUMLLQXSRUDEQLãNDRSUHPD8(]DFHOLþQD
,07&'0$RPUHåMDWUHWMHJHQHUDFLMH,07GHO+DUPRQL]LUDQL(1]D
7''875$7''%6NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(V
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS),
Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks -
Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 908-7 Version 3.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 908-7 V3.2.1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 908-7 V3.2.1:2007

---------------------- Page: 2 ----------------------

SIST EN 301 908-7 V3.2.1:2007

ETSI EN 301 908-7 V3.2.1 (2007-05)
Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 7: Harmonized EN for IMT-2000,
CDMA TDD (UTRA TDD) (BS)
covering essential requirements
of article 3.2 of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 301 908-7 V3.2.1:2007
 2 ETSI EN 301 908-7 V3.2.1 (2007-05)



Reference
REN/ERM-TFES-003-7
Keywords
3G, 3GPP, cell, digital, IMT-2000, mobile, radio,
regulation, TD-CDMA, TDD, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2007.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 908-7 V3.2.1:2007
 3 ETSI EN 301 908-7 V3.2.1 (2007-05)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .7
1 Scope.8
2 References.8
3 Definitions, symbols and abbreviations .9
3.1 Definitions.9
3.2 Symbols.10
3.3 Abbreviations.10
4 Technical requirements specifications.11
4.1 Environmental profile.11
4.2 Conformance requirements.11
4.2.1 Introduction.11
4.2.2 Spectrum emission mask.11
4.2.2.1 Definition.11
4.2.2.1.1 3,84 Mcps TDD option.11
4.2.2.1.2 1,28 Mcps TDD option.12
4.2.2.2 Limits.12
4.2.2.2.1 3,84 Mcps TDD option.12
4.2.2.2.2 1,28 Mcps TDD option.13
4.2.2.3 Conformance.14
4.2.3 Transmitter adjacent channel leakage power ratio.14
4.2.3.1 Definition.14
4.2.3.2 Limits.14
4.2.3.2.1 General requirements.14
4.2.3.2.2 Co-existence with UTRA-FDD.15
4.2.3.2.3 Co-existence with unsynchronized UTRA TDD on adjacent channels.15
4.2.3.3 Conformance.16
4.2.4 Transmitter spurious emissions.16
4.2.4.1 Definition.16
4.2.4.2 Limits.16
4.2.4.2.1 General requirements.16
4.2.4.2.2 Co-existence with GSM 900.18
4.2.4.2.3 Co-existence with DCS 1800 .18
4.2.4.2.4 Co-existence with UTRA FDD .19
4.2.4.2.5 Co-existence with unsynchronized TDD.19
4.2.4.3 Conformance.20
4.2.5 Base station maximum output power.20
4.2.5.1 Definition.20
4.2.5.2 Limits.20
4.2.5.3 Conformance.20
4.2.6 Transmit intermodulation.20
4.2.6.1 Definition.20
4.2.6.2 Limits.20
4.2.6.2.1 3,84 Mcps TDD option.20
4.2.6.2.2 1,28 Mpcs TDD option.21
4.2.6.3 Conformance.21
4.2.7 Receiver spurious emissions.21
4.2.7.1 Definition.21
4.2.7.2 Limits.21
4.2.7.2.1 3,84 Mcps TDD option.21
4.2.7.2.2 1,28 Mcps TDD option.22
4.2.7.3 Conformance.22
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 908-7 V3.2.1:2007
 4 ETSI EN 301 908-7 V3.2.1 (2007-05)
4.2.8 Receiver blocking characteristics .22
4.2.8.1 Definition.22
4.2.8.2 Limits.22
4.2.8.2.1 3,84 Mcps TDD option.22
4.2.8.2.2 1,28 Mcps TDD option.23
4.2.8.3 Conformance.24
4.2.9 Receiver intermodulation characteristics .25
4.2.9.1 Definition.25
4.2.9.2 Limits.25
4.2.9.2.1 3,84 Mcps TDD option.25
4.2.9.2.2 1,28 Mcps TDD option.25
4.2.9.3 Conformance.26
4.2.10 Receiver adjacent channel selectivity .26
4.2.10.1 Definition.26
4.2.10.2 Limits.26
4.2.10.2.1 3,84 Mcps TDD option.26
4.2.10.2.2 1,28 Mcps TDD option.26
4.2.10.3 Conformance.27
5 Testing for compliance with technical requirements.27
5.1 Environmental conditions for testing .27
5.2 Interpretation of the measurement results .27
5.3 Essential radio test suites.29
5.3.1 Spectrum emission mask.29
5.3.1.1 Method of test .29
5.3.1.1.1 Initial conditions.29
5.3.1.1.2 Procedure.31
5.3.1.2 Test requirements.31
5.3.1.2.1 3,84 Mcps TDD option.31
5.3.1.2.2 1,28 Mcps TDD option.32
5.3.2 Transmitter adjacent channel leakage power ratio.32
5.3.2.1 Method of test .32
5.3.2.1.1 Initial conditions.32
5.3.2.1.2 Procedure.34
5.3.2.2 Test requirements.35
5.3.2.2.1 3,84 Mcps TDD option.35
5.3.2.2.2 1,28 Mcps TDD option.35
5.3.3 Transmitter spurious emissions.35
5.3.3.1 Method of test .35
5.3.3.1.1 Initial conditions.35
5.3.3.1.2 Procedure.37
5.3.3.2 Test requirements.38
5.3.4 Base station maximum output power.38
5.3.4.1 Method of test .38
5.3.4.1.1 Initial conditions.38
5.3.4.1.2 Procedure.39
5.3.4.2 Test requirements.39
5.3.5 Transmit intermodulation.39
5.3.5.1 Method of test .39
5.3.5.1.1 Initial conditions.39
5.3.5.1.2 Procedure.43
5.3.5.2 Test requirements.43
5.3.6 Receiver spurious emissions.43
5.3.6.1 Method of test .43
5.3.6.1.1 Initial conditions.43
5.3.6.1.2 Procedure.44
5.3.6.2 Test requirements.45
5.3.7 Receiver blocking characteristics .45
5.3.7.1 Method of test .45
5.3.7.1.1 Initial conditions.45
5.3.7.1.2 Procedure.46
5.3.7.2 Test requirements.46
ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 908-7 V3.2.1:2007
 5 ETSI EN 301 908-7 V3.2.1 (2007-05)
5.3.8 Receiver intermodulation characteristics .47
5.3.8.1 Method of test .47
5.3.8.1.1 Initial conditions.47
5.3.8.1.2 Procedure.47
5.3.8.2 Test requirements.48
5.3.9 Receiver adjacent channel selectivity .48
5.3.9.1 Method of test .48
5.3.9.1.1 Initial conditions.48
5.3.9.1.2 Procedure.49
5.3.9.1.3 Test requirements.49
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).50
Annex B (normative): BS configurations.52
B.1 Receiver Diversity.52
B.2 Power Supply options.52
B.3 Ancillary RF amplifiers.52
B.4 BS using antenna arrays .52
B.4.1 Receiver tests.53
B.4.2 Transmitter tests.53
Annex C (informative): Environmental profile specification .54
Annex D (informative): The EN title in the official languages .55
Annex E (informative): Bibliography.57
History .58

ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 908-7 V3.2.1:2007
 6 ETSI EN 301 908-7 V3.2.1 (2007-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The present document is part 3 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS and Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive";
ETSI

---------------------- Page: 8 ----------------------

SIST EN 301 908-7 V3.2.1:2007
 7 ETSI EN 301 908-7 V3.2.1 (2007-05)
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeater) covering essential
requirements of article 3.2 of the R&TTE Directive".

National transposition dates
Date of adoption of this EN: 27 April 2007
Date of latest announcement of this EN (doa): 31 July 2007
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2008
Date of withdrawal of any conflicting National Standard (dow): 31 January 2009

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 (see bibliography).
ETSI

---------------------- Page: 9 ---------------------
...