SIST EN 61587-6:2017
(Main)Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 6: Security aspects for indoor cabinets (IEC 61587-6:2017)
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 6: Security aspects for indoor cabinets (IEC 61587-6:2017)
This part of IEC 61587 specifies security aspects and security performance levels of indoor
cabinets in accordance with IEC 60917 and IEC 60297.
Mechanische Bauweisen für elektrische und elektronische Einrichtungen - Prüfungen für die Reihen IEC 60917 und IEC 60297 - Teil 6: Sicherheitsaspekte für Innenraumschränke
Structures mécaniques pour équipement électrique et électronique - Essais pour les séries IEC 60917 et IEC 60297 - Partie 6: Aspects de sécurité pour les baies d’intérieur
Mehanske strukture za električno in elektronsko opremo - Preskušanje za skupini standardov IEC 60917 in IEC 60297 - 6. del: Varnostni vidiki za notranje omarice (IEC 61587-6:2017)
Ta del standarda IEC 61587 določa varnostne vidike in ravni varnostne učinkovitosti notranje omarice v skladu s standardoma IEC 60917 in IEC 60297.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2017
0HKDQVNHVWUXNWXUH]DHOHNWULþQRLQHOHNWURQVNRRSUHPR3UHVNXãDQMH]DVNXSLQL
VWDQGDUGRY,(& LQ,(& GHO 9DUQRVWQLYLGLNL]DQRWUDQMHRPDULFH
,(&
Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and
IEC 60297 - Part 6: Security aspects for indoor cabinets (IEC 61587-6:2017)
Ta slovenski standard je istoveten z: EN 61587-6:2017
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61587-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2017
ICS 31.240
English Version
Mechanical structures for electrical and electronic equipment -
Tests for IEC 60917 and IEC 60297 series - Part 6: Security
aspects for indoor cabinets
(IEC 61587-6:2017)
Structures mécaniques pour équipement électrique et Mechanische Bauweisen für elektrische und elektronische
électronique - Essais pour les séries IEC 60917 et IEC Einrichtungen - Prüfungen für die Reihen IEC 60917 und
60297 - Partie 6 : Aspects de sécurité pour les baies IEC 60297 - Teil 6: Sicherheitsaspekte für
d'intérieur Innenraumschränke
(IEC 61587-6:2017) (IEC 61587-6:2017)
This European Standard was approved by CENELEC on 2017-06-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61587-6:2017 E
European foreword
The text of document 48D/634/FDIS, future edition 1 of IEC 61587-6, prepared by
SC 48D “Mechanical structures for electrical and electronic equipment” of IEC/TC 48 “Electrical
connectors and mechanical structures for electrical and electronic equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61587-6:2017.
The following dates are fixed:
• latest date by which the document has to be (dop) 2018-03-23
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-06-23
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61587-6:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC27001 NOTE Harmonized as EN 27001.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60297 series Dimensions of mechanical structures of the - series
482,6 mm (19 in) series
IEC 60529 - Degrees of protection provided by - -
enclosures (IP Code)
IEC 60917 series Modular order for the development of EN 60917 series
mechanical structures for electronic
equipment practices
IEC 60917-1 - Modular order for the development of EN 60917-1 -
mechanical structures for electronic
equipment practices -- Part 1: Generic
standard
IEC 61587-1 - Mechanical structures for electronic EN 61587-1 -
equipment - Tests for IEC 60917 and IEC
60297 series - Part 1: Environmental
requirements, test set-up and safety
aspects for cabinets, racks, subracks and
chassis under indoor condition use and
transportation
IEC 61587-2 - Mechanical structures for electronic EN 61587-2 -
equipment - Tests for IEC 60917 and IEC
60297 -- Part 2: Seismic tests for cabinets
and racks
IEC 61587-6 ®
Edition 1.0 2017-05
INTERNATIONAL
STANDARD
colour
inside
Mechanical structures for electrical and electronic equipment – Tests for
IEC 60917 and IEC 60297 series –
Part 6: Security aspects for indoor cabinets
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.240 ISBN 978-2-8322-4303-9
– 2 – IEC 61587-6:2017 © IEC 2017
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Security aspects for indoor cabinets . 8
4.1 General . 8
4.2 Access security level of the cabinet . 9
5 Security performance levels of cabinets . 9
5.1 General . 9
5.2 Security performance levels of cabinet mechanical components . 10
5.2.1 Handle and associated mechanical lock . 10
5.2.2 Key . 12
5.2.3 Cabinet floor anchoring . 13
Annex A (normative) Mechanical performance and test methods for handles . 14
A.1 Mechanical strengths of levers of handles . 14
A.1.1 General . 14
A.1.2 Static loading test, push/pull performance . 14
A.1.3 Static loading test, turn performance . 15
Bibliography . 16
Figure 1 – Typical mechanical components for security provision of the cabinet . 8
Figure 2 – Concept of access protection within buildings or premises . 9
Figure 3 – Static loading test for handle and associated mechanical lock . 11
Figure A.1 – Lever handles push/pull performance . 14
Figure A.2 – Lever handles turn performance. 15
Table 1 – Access security levels of indoor cabinet installation sites . 9
Table 2 – Security performance levels of cabinets . 10
Table 3 – Security performance levels of handle and associated mechanical lock . 10
Table 4 – Test procedures for operation of handle and mechanical lock . 12
Table 5 – Security performance levels of key . 12
Table 6 – Security performance level of cabinet floor anchoring . 13
IEC 61587-6:2017 © IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MECHANICAL STRUCTURES FOR ELECTRICAL AND ELECTRONIC
EQUIPMENT – TESTS FOR IEC 60917 AND IEC 60297 SERIES –
Part 6: Security aspects for indoor cabinets
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61587-6 has been prepared by subcommittee 48D:Mechanical
structures for electrical and electronic equipment, of IEC technical committee 48: Electrical
connectors and mechanical structures for electrical and electronic equipment.
The text of this International Standard is based on the following documents:
FDIS Report on voting
48D/634/FDIS 48D/641/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
– 4 – IEC 61587-6:2017
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.