SIST EN 13759:2012
(Main)Furniture - Operating mechanisms for seating and sofa-beds - Test methods
Furniture - Operating mechanisms for seating and sofa-beds - Test methods
This European Standard specifies test methods for the determination of the durability of hand and power operated reclining mechanisms for adult seating. It also specifies test methods for the determination of the durability of mechanisms for converting sofas and chairs into beds. The test methods are based on use by a person weighing up to 110 kg. Requirements for the durability of reclining mechanisms are not included within this standard. Test methods for strength and durability of the structure are not included. It does not apply to the safety of electrically driven seating which is covered by the machinery, low voltage and EMC directives.
Möbel - Funktionsmechaniken für Sitzmöbel und Liegesofas - Prüfverfahren
Diese Europäische Norm legt Prüfverfahren für hand- und motorbetriebene Wippmechaniken an Sitzmöbel für Erwachsene fest.
Sie legt auch Prüfverfahren für die Bestimmung der Dauerhaltbarkeit der Mechaniken von Liegesofas und
-sesseln fest.
Prüfverfahren für die Festigkeit und Dauerhaltbarkeit des Gestelles sind nicht enthalten. Hierfür gelten EN 12520 und EN 1725.
Sie gilt nicht für die Sicherheit von elektrisch betriebenen Sitzmöbeln, die unter die Maschinenrichtlinie, Niederspannungsrichtlinie und Elektromagnetische Verträglichkeits-Richtlinie (EMV) fallen.
Sie gilt nicht für eingebaute Neige- und Wippmechaniken für Büro-Arbeitsstühle.
Anhang A (informativ) enthält empfohlene Anforderungen.
Meubles - Mécanismes de manoeuvre des sièges et des canapés - Méthodes d'essai
La présente Norme européenne spécifie des méthodes d’essai permettant de déterminer la durabilité des
mécanismes d’inclinaison manuels ou électriques équipant les sièges pour adultes.
Elle prescrit également des méthodes d’essai pour la détermination de la durabilité des mécanismes
permettant de convertir en lits des canapés et des sièges.
Les méthodes d’essai sont basées sur l’utilisation par une personne dont la masse est au plus de 110 kg.
Les exigences de durabilité des mécanismes d’inclinaison ne sont pas incluses dans cette norme.
Les méthodes d’essai de résistance et de durabilité de la structure ne sont pas incluses.
La présente norme ne s’applique pas à la sécurité des sièges électriques qui sont traités dans les Directives
machines, basse tension et CEM.
Elle ne s’applique pas aux mécanismes de basculement et d’inclinaison équipant les sièges de travail.
Pohištvo - Mehanizem za sestavljanje in razstavljanje sedežnega pohištva in zložljivih postelj - Preskusne metode
Ta evropski standard določa preskusne metode, s katerimi se ugotavlja vzdržljivost ročnih in samodejnih mehanizmov za prilagajanje naklona sedežev za odrasle. Določa tudi preskusne metode, s katerimi se ugotavlja vzdržljivost mehanizmov za raztegovanje kavčev in naslonjačev v postelje. Preskusne metode upoštevajo težo oseb do 110 kg. Ta standard ne vključuje zahtev za vzdržljivost mehanizmov za prilagajanje naklona. Preskusne metode za vzdržljivost in trajnost strukture niso vključene. Standard ne velja za varnost električno upravljanih sedežev, ki jih pokrivajo direktive o strojih, nizki napetosti in elektromagnetni združljivosti (EMC).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pohištvo - Mehanizem za sestavljanje in razstavljanje sedežnega pohištva in zložljivih postelj - Preskusne metodeMöbel - Funktionsmechaniken für Sitzmöbel und Liegesofas - PrüfverfahrenMeubles - Mécanismes de manoeuvre des sièges et des canapés - Méthodes d'essaiFurniture - Operating mechanisms for seating and sofa-beds - Test methods97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 13759:2012SIST EN 13759:2012en,fr,de01-november-2012SIST EN 13759:2012SLOVENSKI
STANDARDSIST ENV 13759:20021DGRPHãþD
SIST EN 13759:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13759
April 2012 ICS 97.140 Supersedes ENV 13759:2000English Version
Furniture - Operating mechanisms for seating and sofa-beds - Test methods
Meubles - Mécanismes de manoeuvre des sièges et des canapés - Méthodes d'essai
Möbel - Funktionsmechaniken für Sitzmöbel und Liegesofas - Prüfverfahren This European Standard was approved by CEN on 9 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13759:2012: ESIST EN 13759:2012
EN 13759:2012 (E) 2 Contents Page Foreword .31 Scope .42 Terms and definitions .43 General test conditions .53.1 Preliminary preparation .53.2 Tolerances .54 Test apparatus .55 Test procedure .75.1 Functional assessment .75.2 Durability test .75.2.1 Set up procedure .75.2.2 Furniture not occupied during operation of mechanism .75.2.3 Furniture occupied during operation of the mechanism .76 Test report .8 SIST EN 13759:2012
EN 13759:2012 (E) 3 Foreword This document (EN 13759:2012) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at the latest by October 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes ENV 13759:2000. Compared to ENV 13759:2000 the following modifications have been made: a) Modification of the title to better reflect the content of the standard; b) The test dummy
has been totally revised to better integrate with all types of seating; c) The test dummy loading has been modified to a single loading equivalent to a 110 kg person; d) A note has been added to give guidance on how to test chairs for heavier users; e) A duty cycle has been added for powered reclining mechanisms. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13759:2012
EN 13759:2012 (E) 4 1 Scope This European Standard specifies test methods for the determination of the durability of hand and power operated reclining mechanisms for adult seating. It also specifies test methods for the determination of the durability of mechanisms for converting sofas and chairs into beds. The test methods are based on use by a person weighing up to 110 kg. Requirements for the durability of reclining mechanisms are not included within this standard. Test methods for stre
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.