Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function

This European Standard specifies the safety, design, construction and performance requirements for Temperature Control Function (TCF) and Combustion Product Discharge Safety Device (TTB) intended for use with burners and appliances using gaseous or liquid fuels.
It also describes the test procedures for checking compliance with these requirements.
This European Standard is applicable to AC and DC supplied TCF and TTB (for TCF and TTB supplied by stand-alone battery system, battery systems for mobile applications or systems which are intended to be connected to DC supply networks, see Annex I).
This European Standard is applicable to electronically based TTB and TCF only.

Sicherheits- und Regeleinrichtungen für Brenner und Brennstoffgeräte für gasförmige oder flüssige Brennstoffe - Regelfunktionen in elektronischen Systemen - Temperaturüberwachungsfunktion

Dieses Dokument legt Sicherheits-, Ausführungs-, Konstruktions-, Funktionsanforderungen und die Prüfung der Temperaturüberwachungsfunktionen (TCF) und Sicherheitseinrichtungen zur Abgasüberwachung (TTB) für gasförmige und flüssige Brennstoffe und Brennstoffgeräte fest, die ein oder mehr gasförmige oder flüssige Brennstoffe verbrennen, die im weiteren Verlauf als "TCF" oder "TTB" bezeichnet werden.
Außerdem werden die Prüfverfahren für die Überprüfung der Übereinstimmung mit diesen Anforderungen beschrieben.
Dieses Dokument gilt für TCF und TTB, die mit Wechsel- und Gleichspannung betrieben werden (für TCF und TTB, die mit unabhängigen Batteriesystemen, Batteriesystemen für die mobile Anwendung oder Systemen für den Anschluss an Gleichspannungsnetze betrieben werden, siehe Anhang I).
Dieses Dokument gilt ausschließlich für elektronisch betriebene TTB und TCF.
Für beide, TTB und TCF, gelten die Anforderungen in diesem Dokument für die Kombination von Messfühler und Steuerung.

Équipements auxiliaires pour brûleurs et appareils utilisant des combustibles gazeux ou liquides - Dispositifs de contrôle des systèmes électroniques - Dispositifs de régulation de la température

Le présent document spécifie les exigences de sécurité, de conception, de construction, de fonctionnement et d’essais applicables aux dispositifs de régulation de la température (TCF) et aux dispositifs de contrôle de l'évacuation des produits de combustion (TTB) destinés à être utilisés sur des brûleurs et dans des appareils utilisant des combustibles gazeux ou liquides désignés dans le document par ‘TCF’ et ‘TTB’.
Il décrit également les procédures d'essai ayant pour objet de vérifier la conformité avec ces exigences.
Ce document est applicable aux dispositifs TCF et TTB alimentés en courant alternatif et en courant continu (pour les dispositifs TCF et TTB alimentés par des systèmes de batterie autonomes, des systèmes de batterie pour applications mobiles ou des systèmes destinés à être connectés à des réseaux d’alimentation en courant continu, voir l'Annexe I).
Ce document s’applique uniquement aux dispositifs TCF et TTB électroniques.
Dans les deux cas, TTB et TCF, les exigences de ce document sont applicables à l’ensemble capteur / commande.

Varnostne in nadzorne naprave za gorilnike in aparate na plin ali tekoča goriva - Regulacijske in nadzorne funkcije v elektronskih sistemih - Regulacija temperature

General Information

Status
Not Published
Public Enquiry End Date
01-Feb-2021
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
13-Oct-2021
Due Date
01-Dec-2021
Completion Date
17-Nov-2021

RELATIONS

Buy Standard

Draft
oSIST prEN 16830:2021
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 16830:2021
01-januar-2021

Varnostne in nadzorne naprave za gorilnike in aparate na plin ali tekoča goriva -

Regulacijske in nadzorne funkcije v elektronskih sistemih - Regulacija temperature

Safety and control devices for burners and appliances burning gaseous or liquid fuels -

Control functions in electronic systems - Temperature Control function

Sicherheits- und Regeleinrichtungen für Brenner und Brennstoffgeräte für gasförmige

oder flüssige Brennstoffe - Regelfunktionen in elektronischen Systemen -
Temperaturüberwachungsfunktion

Équipements auxiliaires pour brûleurs et appareils utilisant des combustibles gazeux ou

liquides - Dispositifs de contrôle des systèmes électroniques - Dispositifs de régulation

de la température
Ta slovenski standard je istoveten z: prEN 16830
ICS:
27.060.20 Plinski gorilniki Gas fuel burners
97.100.20 Plinski grelniki Gas heaters
oSIST prEN 16830:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16830:2021
---------------------- Page: 2 ----------------------
oSIST prEN 16830:2021
DRAFT
EUROPEAN STANDARD
prEN 16830
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2021
ICS 91.140.40; 97.100.20 Will supersede EN 16830:2017
English Version
Safety and control devices for burners and appliances
burning gaseous or liquid fuels - Control functions in
electronic systems - Temperature Control function

Équipements auxiliaires pour brûleurs et appareils Sicherheits- und Regeleinrichtungen für Brenner und

utilisant des combustibles gazeux ou liquides - Brennstoffgeräte für gasförmige oder flüssige

Dispositifs de contrôle des systèmes électroniques - Brennstoffe - Regelfunktionen in elektronischen

Dispositifs de régulation de la température Systemen - Temperaturüberwachungsfunktion

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 58.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16830:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16830:2021
prEN 16830:2021 (E)
Contents Page

European foreword ....................................................................................................................................................... 4

Introduction .................................................................................................................................................................... 5

Figure 1 — Temperature control function ........................................................................................................... 6

1 Scope .................................................................................................................................................................... 7

2 Normative references .................................................................................................................................... 7

3 Terms and definitions ................................................................................................................................... 7

4 Classification ..................................................................................................................................................... 8

4.1 Classes of control ............................................................................................................................................. 8

4.1.1 TTB ....................................................................................................................................................................... 8

4.1.2 TCF ........................................................................................................................................................................ 8

4.2 Groups of control ............................................................................................................................................. 8

4.3 Classes of control functions ......................................................................................................................... 8

4.4 Types of DC supplied controls .................................................................................................................... 8

5 Test conditions and uncertainty of measurements ............................................................................ 8

6 Design and Construction .............................................................................................................................. 8

6.1 General ................................................................................................................................................................ 8

6.2 Mechanical parts of the control ................................................................................................................. 9

6.3 Materials ............................................................................................................................................................. 9

6.4 Gas Connections ............................................................................................................................................... 9

6.5 Electrical parts of the control ..................................................................................................................... 9

6.5.1 General ................................................................................................................................................................ 9

6.5.2 Switching elements ......................................................................................................................................... 9

6.5.3 Electrical components ................................................................................................................................... 9

6.6 Protection against internal faults for the purpose of functional safety ................................... 10

6.6.1 Design and construction requirements ............................................................................................... 10

6.6.2 Class A ............................................................................................................................................................... 10

6.6.3 Class B ............................................................................................................................................................... 10

6.6.4 Class C ............................................................................................................................................................... 11

6.6.5 Circuit and construction evaluation ...................................................................................................... 11

6.7 TTB .................................................................................................................................................................... 11

6.7.1 General ............................................................................................................................................................. 11

6.7.2 Threshold value ............................................................................................................................................ 11

6.8 TCF ..................................................................................................................................................................... 11

7 Performance .................................................................................................................................................. 12

7.1 General ............................................................................................................................................................. 12

7.2 Leak-tightness ............................................................................................................................................... 12

7.3 Torsion and bending ................................................................................................................................... 12

7.4 Rated flow rate .............................................................................................................................................. 12

7.5 Durability ........................................................................................................................................................ 12

7.5.1 Elastomers in contact with gas ................................................................................................................ 12

7.5.2 Durability of marking ................................................................................................................................. 12

7.5.3 Resistance to scratching ............................................................................................................................ 12

7.5.4 Resistance to humidity ............................................................................................................................... 12

7.5.5 Lubricants in contact with gas .................................................................................................................... 13

---------------------- Page: 4 ----------------------
oSIST prEN 16830:2021
prEN 16830:2021 (E)

7.6 Performance tests for electronic controls ........................................................................................... 13

7.6.1 At ambient temperature ............................................................................................................................ 13

7.6.2 At minimum temperature.......................................................................................................................... 13

7.6.3 At maximum temperature ......................................................................................................................... 13

7.7 Long-term performance for electronic controls ............................................................................... 13

7.7.1 General ............................................................................................................................................................. 13

7.7.2 Stress test ........................................................................................................................................................ 13

7.7.3 Long term performance tests ................................................................................................................... 13

7.7.4 TCF Sensing element(s) assembly .......................................................................................................... 13

7.7.5 TTB Sensing element(s) assembly .......................................................................................................... 14

7.8 Data exchange ................................................................................................................................................ 14

8 Electrical requirements .............................................................................................................................. 14

8.1 General ............................................................................................................................................................. 14

8.2 Protection by enclosure ............................................................................................................................. 14

9 Electromagnetic compatibility (EMC) ................................................................................................... 14

10 Marking, instructions .................................................................................................................................. 14

10.1 Marking ............................................................................................................................................................ 14

10.2 Instructions ..................................................................................................................................................... 15

10.3 Warning Notice .............................................................................................................................................. 15

Annex A (informative) Abbreviations and Symbols ...................................................................................... 16

Annex B (informative) Leak-tightness test for gas controls – volumetric method ............................ 17

Annex C (informative) Leak-tightness test for gas controls – pressure loss method ........................ 18

Annex D (normative) Conversion of pressure loss into leakage rate ..................................................... 19

Annex E (normative) Electrical/electronic component fault modes ...................................................... 20

Annex F (normative) Additional requirements for safety accessories and pressure

accessories as defined in EU Directive 2014/68/EU........................................................................ 21

Annex G (normative) Materials for pressurized parts ................................................................................. 22

Annex H (normative) Additional materials for pressurized parts .......................................................... 23

Annex I (normative) Requirements for controls used in DC supplied burners and

appliances burning gaseous or liquid fuels......................................................................................... 24

Annex J (normative) Method for the determination of a Safety Integrity Level (SIL) ....................... 25

Annex K (normative) Method for the determination of a Performance Level (PL) ........................... 26

Annex L (informative) Relationship between Safety Integrity Level (SIL) and Performance

Level (PL) ......................................................................................................................................................... 27

Annex M (normative) Reset functions ................................................................................................................ 28

Annex N (informative) Guidance document on Environmental Aspects ............................................... 29

Annex O (normative) Seals of elastomer, cork and synthetic fibre mixtures ...................................... 30

Bibliography ................................................................................................................................................................. 31

---------------------- Page: 5 ----------------------
oSIST prEN 16830:2021
prEN 16830:2021 (E)
European foreword

This European standard (prEN 16830:2021) has been prepared by Technical Committee CEN/TC 58

“Safety and control devices for burners and appliances burning gaseous or liquid fuels”, the secretariat of

which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16830:2017.

It should be noted that the following significant editorial changes compared to the previous edition have

been incorporated in this European Standard:
— alignment to EN 13611:2019;
— terms and definitions are aligned to EN 13611:2019;
— [to be done]]
---------------------- Page: 6 ----------------------
oSIST prEN 16830:2021
prEN 16830:2021 (E)
Introduction
This document is intended to be used in conjunction with EN 13611:2019.

The generic requirements for controls are given in EN 13611:2019 and methods for classification and

assessment for new controls and control functions are given in EN 14459:2015.

This control standard refers to clauses of EN 13611:2019 or adapts it by stating “with the following

modification”, “with the following addition”, “is replaced by the following” or “is not applicable” in the

corresponding clause. This document adds clauses or subclauses to the structure of EN 13611:2019

which are particular to this document, subclauses or annexes that are additional to those in

EN 13611:2019 are numbered starting from 101 or are designated as Annex AA, BB, CC etc.

This control standard describes requirements for two types of temperature-based Appliance Control

Functions.
1) Temperature Control Function

The temperature control function (in the following called TCF) is a system that consists of temperature

sensing, signal processing, switching actions (on/off or protective action) and reset (see Figure 1).

The purpose of a TCF is to control the temperature (temperature regulator) and to prevent the risk of

excessive temperature (temperature limiter) which could lead to the hazard of overheating for gas and

liquid fuel burning appliances. A TCF requires a class C system, based on a comparison, made between an

automatic burner control system and a temperature control function, the implication on safety of either

function being considered equivalent. Gas and liquid fuel appliance standards can allow a lower class in

combination with constructional measures, as long as the overall result for TCF is a class C.

Traditional solutions, using a combination of mechanical thermostats as specified in the appliance

standards (e.g. EN 15502-1) have been considered to fulfil the requirements. This assumption is based

on specific mechanical solutions, originating from practice over many years and relying on redundancy

as the principle.
---------------------- Page: 7 ----------------------
oSIST prEN 16830:2021
prEN 16830:2021 (E)
Key
1 reset 5 protective action
2 sensing element(s) 6 on/off action
3 switching action(s) 7 control
4 temperature regulator and protective controller 8 temperature control function
Figure 1 — Temperature control function
2) TTB

The Appliance Control Function TTB (Combustion Product Discharge Safety Device) is intended to

provide protection against poisoning and suffocation in case of a (partially) blocked flue. This clause

provides the requirements for electronic TTBs consisting of:
— a control that can take a protective action and

— a sensing element that monitors a significant physical value in relation to the spillage of combustion

products into the environment where the gas appliance is installed.

If the spillage reaches a pre-set level, the TTB should initiate a protective action. Allowable spillage is

determined by the application standard.

NOTE Instead of TTB, the term “Combustion Product Discharge Safety Device” is used in EN 15502-2-2.

For both TTB and TCF, the requirements in this document are applicable to the combination of sensing

element and control.
---------------------- Page: 8 ----------------------
oSIST prEN 16830:2021
prEN 16830:2021 (E)
1 Scope

This document specifies the safety, design, construction, performance requirements and testing of

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.