Fire hazard testing -- Part 10-2: Abnormal heat - Ball pressure test

Specifies the ball pressure test as a method for testing parts of non-metallic materials for resistance to heat. Includes the following significant technical changes from the previous edition: a) The post test water immersion time (see 7.1) has been changed. b) dimension d is no longer the diameter but the greatest dimension of the indentation (see 7.2 and Figure 2). c) The stated accuracy of the measuring table has been deleted (see 4.4). Has the status of a basic safety publication in accordance with IEC Guide 104

Prüfungen zur Beurteilung der Brandgefahr -- Teil 10-2: Unübliche Wärme - Kugeldruckprüfung

Essais relatifs aux risques du feu -- Partie 10-2: Chaleurs anormales - Essai à la bille

Spécifie l'essai à la bille comme méthode d'essai appliquée aux parties en matériaux non métalliques pour vérifier la résistance à la chaleur. Elle est applicable aux matériels électrotechniques, à leurs sous-ensembles et à leurs composants, et aux matériaux isolants électriques solides à l'exception des céramiques. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) Le temps d'immersion dans l'eau à l'issue de l'essai (voir 7.1) a été modifié. b) La dimension d ne définit plus le diamètre mais la plus grande dimension de l'empreinte (voir 7.2 et Figure 2). c) La précision du tableau de mesure a été supprimée (voir 4.4.). A le statut d'une publication fondamentale de sécurité conformément au Guide 104 de la CEI.

Preskušanje požarne ogroženosti - 10-2. del: Nenormalna toplota - Preskus z jekleno kroglico (IEC 60695-10-2:2003)

General Information

Status
Withdrawn
Publication Date
31-Jan-2004
Withdrawal Date
28-Mar-2017
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
29-Mar-2017
Due Date
21-Apr-2017
Completion Date
29-Mar-2017

Relations

Buy Standard

Standard
EN 60695-10-2:2004
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60695-10-2:2004
01-februar-2004
Preskušanje požarne ogroženosti - 10-2. del: Nenormalna toplota - Preskus z
jekleno kroglico (IEC 60695-10-2:2003)
Fire hazard testing -- Part 10-2: Abnormal heat - Ball pressure test
Prüfungen zur Beurteilung der Brandgefahr -- Teil 10-2: Unübliche Wärme -
Kugeldruckprüfung
Essais relatifs aux risques du feu -- Partie 10-2: Chaleurs anormales - Essai à la bille
Ta slovenski standard je istoveten z: EN 60695-10-2:2003
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN 60695-10-2:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60695-10-2:2004

---------------------- Page: 2 ----------------------

SIST EN 60695-10-2:2004
EUROPEAN STANDARD EN 60695-10-2
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2003

ICS 29.020


English version


Fire hazard testing
Part 10-2: Abnormal heat -
Ball pressure test
(IEC 60695-10-2:2003)


Essais relatifs aux risques du feu Prüfungen zur Beurteilung
Partie 10-2: Chaleurs anormales - der Brandgefahr
Essai à la bille Teil 10-2: Unübliche Wärme -
(CEI 60695-10-2:2003) Kugeldruckprüfung
(IEC 60695-10-2:2003)






This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60695-10-2:2003 E

---------------------- Page: 3 ----------------------

SIST EN 60695-10-2:2004
EN 60695-10-2:2003 - 2 -
Foreword

The text of document 89/591/FDIS, future edition 2 of IEC 60695-10-2, prepared by IEC TC 89, Fire
hazard testing, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60695-10-2 on 2003-10-01.

The following dates were fixed:

– latest dat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.