oSIST prEN IEC 61753-081-06:2022
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 081-06: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category OP+ - Extended outdoor protected environment
Fibre optic interconnecting devices and passive components - Performance standard - Part 081-06: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category OP+ - Extended outdoor protected environment
IEC 61753-081-06:2023 contains the minimum initial test and measurement requirements and severities which a fibre optic middle-scale 1 × N (16 ≤ N ≤ 64) DWDM (dense wavelength division multiplexing) arrayed waveguide grating device with channel spacing of 50 GHz, 100 GHz or 200 GHz satisfies in order to be categorized as meeting the requirements of category OP+ (extended outdoor protected environment). The requirements are given for the DWDM devices with Gaussian passband profile and flat-top passband profile. The requirements exclude the devices with dynamic electrical temperature control.
Lichtwellenleiter – Verbindungselemente und passive Bauteile – Betriebsverhalten – Teil 081-06: Nicht mit Steckverbindern versehene mittelgroße Einmoden-Lichtwellenleiter-1 x N-DWDM-Bauteile für die Kategorie OP+ – Freiluft, geschützte Umgebung, erweitert
Dispositifs d’interconnexion et composants passifs fibroniques – Norme de performance – Partie 081-06: Dispositifs DWDM 1 × N de milieu d’échelle à fibres optiques unimodales, non connectorisés, pour catégorie OP+ – Environnement extérieur protégé étendu
IEC 61753-081-06:2023 contient les exigences initiales minimales d’essai et de mesure, ainsi que les sévérités auxquelles un dispositif fibronique à réseau de diffraction à guide d’ondes matriciel DWDM (multiplexage par répartition en longueur d'onde dense, dense wavelength division multiplexing) 1 × N (16 ≤ N ≤ 64) de milieu d'échelle avec un espacement entre canaux de 50 GHz, 100 GHz ou 200 GHz satisfait pour entrer dans une catégorie satisfaisant aux exigences de la catégorie OP+ (environnement extérieur protégé étendu). Les exigences sont données pour les dispositifs DWDM à profil passe-bande gaussien et à profil passe-bande carré. Ces exigences excluent les dispositifs avec organe de commande de température électrique dynamique.
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 081-06. del: Električno krmiljeni spremenljivi optični atenuator srednje obsežne naprave 1 x N DWDM brez konektorjev za enorodovna vlakna kategorije OP+ - Razširjeno zunanje zaščiteno okolje
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61753-081-06:2022
01-oktober-2022
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 081-06. del:
Električno krmiljeni spremenljivi optični atenuator srednje obsežne naprave 1 x N
DWDM brez konektorjev za enorodovna vlakna kategorije OP+ - Razširjeno
zunanje zaščiteno okolje
Fibre optic interconnecting devices and passive components - Performance standard -
Part 081-06: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM
devices for category OP+ - Extended outdoor protected environment
Dispositifs d’interconnexion et composants passifs fibroniques – Norme de performance
– Partie 081-06: Dispositifs DWDM 1 × N de milieu d’échelle à fibres optiques
unimodales, non connectorisés, pour catégorie OP+ – Environnement extérieur protégé
étendu
Ta slovenski standard je istoveten z: prEN IEC 61753-081-06:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61753-081-06:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61753-081-06:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61753-081-06:2022
86B/4632/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61753-081-06 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-08-12 2022-11-04
SUPERSEDES DOCUMENTS:
86B/4547/CD, 86B/4581A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Fibre optic interconnecting devices and passive components – Performance standard – Part 081-
06: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category
OP+ – Extended outdoor protected environment
PROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61753-081-06:2022
IEC CDV 61753-081-06/Ed1 © IEC 2022 – 2 – 86B/4632/CDV
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 7
6 4 Test . 7
7 5 Test report . 7
8 6 Performance requirements . 8
9 6.1 Reference components . 8
10 6.2 Dimensions . 8
11 6.3 Test details and requirements . 8
12 Annex A (normative) Sample size . 17
13 Bibliography . 18
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.