Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C - Controlled environments (IEC 61753-061-2:2020)

This part of IEC 61753 contains the minimum test and measurement requirements and
severities which a fibre optic isolator as specified by IEC 61202-1 satisfies in order to be
categorized as meeting the requirements of isolators used in controlled environments as
specified in IEC 61753-1. The requirements cover single-mode pigtailed style polarization
independent isolators for category C used in controlled environments.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 061-2: Einmoden-Lichtwellenleiter-Isolatoren mit Pigtails für Kategorie C - Kontrollierte Umgebung (IEC 61753-061-2:2020)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 061-2: Isolateurs à fibres optiques unimodales munis de fibres amorces non connectorisées pour la catégorie C - Environnements contrôlés (IEC 61753-061-2:2020)

IEC 61753-061-2:2020 est disponible sous forme de IEC 61753-061-2:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

IEC 61753-061-2:2020 contient les sévérités et les exigences minimales de mesure et d'essai auxquelles un isolateur fibronique tel que spécifié dans l'IEC 61202-1 est tenu de satisfaire afin d'être considéré comme conforme aux exigences des isolateurs utilisés dans des environnements contrôlés tel que spécifié dans l'IEC 61753-1. Les exigences couvrent les isolateurs à fibres unimodales munis de fibres amorces non connectorisées pour la catégorie C utilisés dans des environnements contrôlés. Cette deuxième édition annule et remplace la première édition parue en 2012 et constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- ajout des détails et des conditions des procédures d'essai à puissance optique élevée dans l'Annexe B;
- modification des conditions d'essai en harmonisation avec l'IEC 61753-1:2018;
- ajout de la catégorie CHD;
- ajout des conditions de mesure détaillées dans l'Annexe C;
- modification de la structure des articles conformément aux dernières Directives ISO/IEC, Partie 2.

Optični spojni elementi in pasivne komponente - Tehnični standard - 061-2. del: Enorodovni optični izolatorji z repki, neodvisni od polarizacije, za kategorijo C - Nadzorovana okolja (IEC 61753-061-2:2020)

General Information

Status
Published
Publication Date
09-Jun-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Jun-2020
Due Date
10-Aug-2020
Completion Date
10-Jun-2020

Relations

Buy Standard

Standard
EN IEC 61753-061-2:2020
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61753-061-2:2020
01-september-2020
Nadomešča:
SIST EN 61753-061-2:2013
Optični spojni elementi in pasivne komponente - Tehnični standard - 061-2. del:
Enorodovni optični izolatorji z repki, neodvisni od polarizacije, za kategorijo C -
Nadzorovana okolja (IEC 61753-061-2:2020)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for
category C - Controlled environments (IEC 61753-061-2:2020)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
061-2: Einmoden-Lichtwellenleiter-Isolatoren mit Pigtails für Kategorie C - Kontrollierte
Umgebung (IEC 61753-061-2:2020)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 061-2: Isolateurs à fibres optiques unimodales munis de fibres
amorces non connectorisées pour la catégorie C - Environnements contrôlés (IEC 61753
-061-2:2020)
Ta slovenski standard je istoveten z: EN IEC 61753-061-2:2020
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-061-2:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61753-061-2:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 61753-061-2:2020


EUROPEAN STANDARD EN IEC 61753-061-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2020
ICS 33.180.10 Supersedes EN 61753-061-2:2012 and all of its
amendments and corrigenda (if any)
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 061-2: Single-mode fibre optic
pigtailed style polarization independent isolators for category C -
Controlled environments
(IEC 61753-061-2:2020)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 061-2: Bauteile - Betriebsverhalten - Teil 061-2:
Isolateurs fibroniques à fibres unimodales munis de fibres Polarisationsunabhängige-Einmoden-Lichtwellenleiter-
amorces non connectorisées pour la catégorie C - Isolatoren mit Pigtails für Kategorie C - Kontrollierte
Environnements contrôlés Umgebung
(IEC 61753-061-2:2020) (IEC 61753-061-2:2020)
This European Standard was approved by CENELEC on 2020-05-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61753-061-2:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61753-061-2:2020
EN IEC 61753-061-2:2020 (E)
European foreword
The text of document 86B/4270/FDIS, future edition 2 of IEC 61753-061-2, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-061-2:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-02-14
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-05-14
document have to be withdrawn

This document supersedes EN 61753-061-2:2012 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61753-061-2:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61300-3-38 NOTE Harmonized as EN 61300-3-38
IEC 61753-1 NOTE Harmonized as EN IEC 61753-1


2

---------------------- Page: 4 ----------------------
SIST EN IEC 61753-061-2:2020
EN IEC 61753-061-2:2020 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor EN IEC 60794-2-50 -
optical fibre cables - Family specification for
simplex and duplex cables for use in
terminated cable assemblies
IEC 61202-1 - Fibre optic interconnecting devices and EN 61202-1 -
passive components - Fibre optic isolators -
Part 1: Generic specification
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures - Part 2-1: Tests -
Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2-4: Tests -
Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures - Part 2-5: Tests -
Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures - Part 2-9: Tests -
Shock
3

---------------------- Page: 5 ----------------------
SIST EN IEC 61753-061-2:2020
EN IEC 61753-061-2:2020 (E)
Publication Year Title EN/HD Year
IEC 61300-2-14 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 2-14: Tests
- High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2-17: Tests
- Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2-18: Tests
- Dry heat - High temperature endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures - Part 2-19: Tests
- Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2-22: Tests
- Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures - Part 2-42: Tests
- Static side load for strain relief
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures - Part 2-44: Tests
- Flexing of the strain relief of fibre optic
devices
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures - Part 3-2:
Examination and measurements -
Polarization dependent loss in a single-mode
fibre optic device
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures - Part 3-3:
Examinations and measurements - Active
monitoring of changes in attenuation and
return loss
IEC 61300-3-7 - Fibre optic interconnecting devices and - -
passive components - Basic test and
measurement procedures - Part 3-7:
Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components
4

---------------------- Page: 6 ----------------------
SIST EN IEC 61753-061-2:2020
EN IEC 61753-061-2:2020 (E)
Publication Year Title EN/HD Year
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures - Part 3-28:
Examinations and measurements - Transient
loss
IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 -
passive components - Basic test and
measurement procedures - Part 3-32:
Examinations and measurements -
Polarization mode dispersion measurement
for passive optical components
IEC/TS 62627-09 - Fibre optic interconnecting devices and - -
passive components - Vocabulary for
passive optical devices

5

---------------------- Page: 7 ----------------------
SIST EN IEC 61753-061-2:2020

---------------------- Page: 8 ----------------------
SIST EN IEC 61753-061-2:2020



IEC 61753-061-2

®


Edition 2.0 2020-04




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Fibre optic interconnecting devices and passive components – Performance

standard –

Part 061-2: Single-mode fibre optic pigtailed style polarization independent


isolators for category C – Controlled environments



Dispositifs d'interconnexion et composants passifs fibroniques – Norme de


performance –

Partie 061-2: Isolateurs fibroniques à fibres unimodales munis de fibres amorces

non connectorisées pour la catégorie C – Environnements contrôlés










INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.180.10 ISBN 978-2-8322-8108-6




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 9 ----------------------
SIST EN IEC 61753-061-2:2020
– 2 – IEC 61753-061-2:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Test . 6
5 Test report . 7
6 Performance requirements. 7
6.1 Sample size . 7
6.2 Test details and requirements . 7
Annex A (normative) Sample size . 15
Annex B (normative) High power test procedure of fibre optic isolators . 16
B.1 General . 16
B.2 Forward input test . 16
B.2.1 Forward input test set-up . 16
B.2.2 Forward input test procedure . 16
B.3 Backward input test . 17
B.3.1 Backward input test set-up. 17
B.3.2 Backward input test procedure . 17
B.4 Both direction input test . 17
B.4.1 Both direction input test set-up . 17
B.4.2 Both direction input test procedure . 18
Annex C (informative) Example of detailed measurement conditions including test
details and requirements . 19
Bibliography . 21

Figure B.1 – Test set-up of forward input test. 16
Figure B.2 – Test set-up of the backward input test. 17
Figure B.3 – Test set-up of both direction input test . 18

Table 1 – Single-mode spectral bands . 7
Table 2 – Test details and requirements for category C . 8
HD
Table 3 – Test details and requirements for category C . 11
Table A.1 – Sample size . 15
Table C.1 – Example of detailed measurement conditions. 19
Table C.2 – Example of detailed measurement conditions for before, during (if required)
and after the environmental tests . 20

---------------------- Page: 10 ----------------------
SIST EN IEC 61753-061-2:2020
IEC 61753-061-2:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –

Part 061-2: Single-mode fibre optic pigtailed style
polarization independent isolators for category C –
Controlled environments

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-061-2 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
This second edition cancels and replaces the first edition published in 2012 and constitutes a
technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) addition of the detail high optical power test procedures and the condition in Annex B;
b) change of test conditions harmonizing with IEC 61753-1:2018;
HD
c) addition of category C ;
d) addition of the detailed measurements conditions in Annex C;
e) change of clause structure accordance with the latest ISO/IEC Directives, Part 2.

---------------------- Page: 11 ----------------------
SIST EN IEC 61753-061-2:2020
– 4 – IEC 61753-061-2:2020 © IEC 2020
The text of this International Standard is based on the following documents:
FDIS Report on voting
86B/4270/FDIS 86B/4284/RVD

Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61753 series, published under the general title Fibre optic
interconnecting devices and passive components – Performance standard, can be found on the
IEC website.
Future standards will carry the new general title as cited above. Titles of existing standards in
this series will be updated at the time of the next edition.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 12 ----------------------
SIST EN IEC 61753-061-2:2020
IEC 61753-061-2:2020 © IEC 2020 – 5 –
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –

Part 061-2: Single-mode fibre optic pigtailed style
polarization independent isolators for category C –
Controlled environments



1 Scope
This part of IEC 61753 contains the minimum test and measurement requirements and
severities which a fibre optic isolator as specified by IEC 61202-1 satisfies in order to be
categorized as meeting the requirements of isolators used in controlled environments as
specified in IEC 61753-1. The requirements cover single-mode pigtailed style polarization
independent isolators for category C used in controlled environments.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for
class B single-mode fibres
IEC 60794-2-50, Optical fibre cables – Part 2-50: Indoor cables – Family specification for
simplex and duplex cables for use in terminated cable assemblies
IEC 61202-1, Fibre optic interconnecting devices and passive components – Fibre optic
isolators – Part 1: Generic specification
IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-4: Tests – Fibre or cable retention
IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-5: Tests – Torsion
IEC 61300-2-9, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-9: Tests – Shock
IEC 61300-2-14, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-14: Tests – High optical power
IEC 61300-2-17, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-17: Tests – Cold
IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-18: Tests – Dry heat – High temperature endurance

---------------------- Page: 13 ----------------------
SIST EN IEC 61753-061-2:2020
– 6 – IEC 61753-061-2:2020 © IEC 2020
IEC 61300-2-19, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-19: Tests – Damp heat (steady state)
IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-22: Tests – Change of temperature
IEC 61300-2-42, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-42: Tests – Static side load for strain relief
IEC 61300-2-44, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-44: Tests – Flexing of the strain relief of fibre optic devices
IEC 61300-3-2, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-2: Examinations and measurements – Polarization
dependence loss in a single-mode fibre optic device
IEC 61300-3-3, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-3: Examinations and measurements – Active monitoring of
changes in attenuation and return loss
IEC 61300-3-7, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-7: Examinations and measurements – Wavelength
dependence of attenuation and return loss of single mode components
IEC 61300-3-28, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-28: Examinations and measurements – Transient loss
IEC 61300-3-32, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 3-32: Examinations and measurements – Polarization mode
dispersion measurement for passive optical components
IEC TS 62627-09, Fibre optic interconnecting devices and passive components – Vocabulary
for passive optical devices
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 61202-1 and
IEC TS 62627-09 apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Test
All test methods are in accordance with a specific standard of the IEC 61300 series, of which
parts applicable to this document are mentioned in 6.2 (see Table 2 and Table 3).
The samples shall be terminated onto single-mode fibres as per IEC 60793-2-50 category
B-652.B, B-652.D or B-657 in either coated fibres (primary and secondary) or reinforced cable
format as per IEC 60794-2-50.

---------------------- Page: 14 ----------------------
SIST EN IEC 61753-061-2:2020
IEC 61753-061-2:2020 © IEC 2020 – 7 –
Table 1 is intended to provide guidance on the wavelength ranges of the various spectral bands.
It is not intended for specification. Values of operating wavelength used in performance
verification shall be specified between the customer and supplier or shall be as defined in the
manufacturer’s specification.
Table 1 – Single-mode spectral bands
Band Descriptor Range
 nm
O-band Original 1 260 to 1 360
E-band Extended 1 360 to 1 460
S-band Short wavelength 1 460 to 1 530
C-band Conventional 1 530 to 1 565
L-band Long wavelength 1 565 to 1 625
U-band Ultralong wavelength 1 625 to 1 675
Source: ITU-T G.Supplement 39.

5 Test report
Fully documented test reports and supporting evidence shall be prepared and be available for
inspections as evidence that the tests have been carried out and complied with.
6 Performance requirements
6.1 Sample size
Sample sizes for the tests are defined in Annex A.
6.2 Test details and requirements
A minimum length of fibre or cable of 2,0 m per port shall be prepared for all tests.
HD
Test details and requirements for category C and C are shown in Table 2 and Table 3,
respectively. An example of test details and requirements including detailed measurements
conditions is shown in Annex C (informative).

---------------------- Page: 15 ----------------------
SIST EN IEC 61753-061-2:2020
– 8 – IEC 61753-061-2:2020 © IEC 2020
Table 2 – Test details and requirements for category C
No Tests Requirements Details
1 Insertion loss ≤ 0,7 dB (single stage) Launch fibre length: ≥ 2,0 m
(attenuation)
≤ 0,8 dB (double stage) Insertion loss (attenuation) shall be
Condition:
IEC 61300-3-7
met over operating wavelength
range and all state of polarization
IEC 61300-3-2
(SOP).
Refer Table C.1,
Measurement ≤ 0,1 dB
No.1.
uncertainty:
2 Isolation ≥ 20 dB (single stage) Launch fibre length: ≥ 2,0 m
IEC 61300-3-7 ≥ 40 dB (double stage) Condition: Isolation shall be met over
operating wavelength range and all
IEC 61300-3-2
SOP.
Refer Table C.1,
Measurement ≤ 0,3 dB (single stage)
No.2.
uncertainty:
≤ 0,5 dB (double stage)
NOTE IEC 61300-3-7 is the test

method to measure the wavelength
dependence of attenuation.
However, it can apply to the
measurement of isolation, because
in the case of an isolator, isolation
is the wavelength dependent
attenuation measured in the
opposite direction to test no. 1.
3 Return loss ≥ 55 dB Launch fibre length: ≥ 2,0 m
IEC 61300-3-7 Return loss shall be met over
Condition:
operating wavelength range.
Refer Table C.1,
No.3.
Measurement ≤ 1 dB
uncertainty:
The port not under test shall be
optically terminated to avoid
unwanted reflections contributing to
the measurement.
4 Polarization ≤ 0,10 dB (single stage) Launch fibre length: ≥ 2,0 m
dependent
≤ 0,15 dB (double stage) Condition: PDL shall be met over operating
loss
wavelength range.
PDL
Measurement ≤ 0,02 dB
IEC 61300-3-2
uncertainty
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.