SIST EN 50377-15-1:2011

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 15-1: Type MPO with PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre

1.1   Product definition
This European Standard contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled 12 fibre multimode MPO connector set (plug adapter plug) must meet in order for it to be categorised as an EN standard product.
Since different variants are permitted, product marking details are given in 3.5.
1.2   Intermateability
All products conforming to the requirements of this standard will intermate and give the specified level of random attenuation and random return loss performance provided the same core size is used. The intention is that this will be true irrespective of the manufacturing source(s) of the product.
1.3   Operating environment
The tests selected combined with the severity and duration are representative of a backplane/back panel indoor application derived from customer premise protected environment as defined in EN 50173 series and ISO/IEC 11801 and as specified in category C per EN 61753-1:2007.
1.4   Reliability
Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this standard does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment programme.
1.5   Quality assurance
Compliance with this standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme.

Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-Datenübertragungssysteme - Produktnormen - Teil 15-1: Bauart MPO mit 12-Faser PPS-Ferrulen zum Anschluss an Mehrmodenfasern der Kategorie A1a nach IEC 60793-2 für 50/125-µm-Mehrmodenfasern

Jeux de connecteurs et composants d’interconnexion à utiliser dans les systèmes de communication par fibres optiques - Spécifications de produits - Partie 15-1: Type MPO équipé de férules PPS 12 fibres, raccordé sur fibres multimodales de catégorie A1a de la CEI 60793-2 pour fibres multimodales de 50/125 microns

Konektorski sestavi in povezovalne komponente za uporabo v optičnih komunikacijskih sistemih - Specifikacije izdelka - 15-1. del: Tip MPO s tulkami PPS, zaključenimi na večrodovnem vlaknu kategorije A1a po IEC 60793-2 za večrodovno vlakno velikosti 50/125 mikrometrov

1.1 Opredelitev izdelka
Ta standard vsebuje začetne zahteve za dimenzije, optične in mehanske zahteve ter zahteve za okoljsko učinkovitost, ki jim mora ustrezati zaključeni in sestavljeni 12-vlakenski večrodovni (z obojko) konektorski sestav MPO (priključek-adapter-priključek), da bi bil opredeljen kot izdelek standarda EN.
Ker so dovoljene različice, so podrobnosti o označevanju izdelka navedene v 3.5.
1.2 Medsebojna združljivost
Vsi izdelki, v skladu z zahtevami tega standarda so medsebojno združljivi in omogočajo določeno raven uspešnosti naključnega slabljenja in naključne povratne izgube, če se uporablja ista velikost sredice. To velja ne glede na vir(-e) izdelave izdelka.
1.3 Delovno okolje
Izbrani preskusi v kombinaciji s strogostjo in trajanjem predstavljajo aplikacijo za zaprte prostore na hrbtni plošči, izpeljano iz zaščitenega okolja uporabniških prostorov, kot je opredeljeno v seriji EN 50173 in ISO/IEC 11801 ter kot je določeno v kategoriji C po EN 61753-1:2007.
1.4 Zanesljivost
Medtem ko je pričakovana življenjska doba izdelka v tem okolju 20 let, skladnost s tem standardom ne jamči zanesljivosti izdelka. Ta se mora predvideti z uporabo priznanega programa za ocenjevanje zanesljivosti.
1.5 Zagotavljanje kakovosti
Skladnost s tem standardom ne jamči skladnosti izdelave izdelka. Ta se mora vzdrževati z uporabo priznanega programa za zagotavljanje kakovosti.

General Information

• Status: Published
• Public Enquiry End Date: 30-Nov-2008
• Publication Date: 13-Apr-2011
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Apr-2011
• Due Date: 12-Jun-2011
• Completion Date: 14-Apr-2011
• Ref Project: EN 50377-15-1:2011 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre

Relations

• Revised: oSIST prEN 50377-15-1:2020 - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 15-1: Type MPO with 12 fibre PPS ferrules terminated on EN 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre - macrobend enhanced fibre only
• Effective Date: 05-Feb-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2011
.RQHNWRUVNLVHVWDYLLQSRYH]RYDOQHNRPSRQHQWH]DXSRUDERYRSWLþQLK
NRPXQLNDFLMVNLKVLVWHPLK6SHFLILNDFLMHL]GHONDGHO7LS032VWXONDPL336
]DNOMXþHQLPLQDYHþURGRYQHPYODNQXNDWHJRULMH$DSR,(&]DYHþURGRYQR
YODNQRYHOLNRVWLPLNURPHWURY
Connector sets and interconnect components to be used in optical fibre communication
systems - Product specifications - Part 15-1: Type MPO with PPS ferrules terminated on
IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre
Steckverbindersätze und Verbindungsbauelemente für Lichtwellenleiter-
Datenübertragungssysteme - Produktnormen - Teil 15-1: Bauart MPO mit 12-Faser PPS-
Ferrulen zum Anschluss an Mehrmodenfasern der Kategorie A1a nach IEC 60793-2 für
50/125-µm-Mehrmodenfasern
Jeux de connecteurs et composants d’interconnexion à utiliser dans les systèmes de
communication par fibres optiques - Spécifications de produits - Partie 15-1: Type MPO
équipé de férules PPS 12 fibres, raccordé sur fibres multimodales de catégorie A1a de la
CEI 60793-2 pour fibres multimodales de 50/125 microns
Ta slovenski standard je istoveten z: EN 50377-15-1:2011
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 50377-15-1
NORME EUROPÉENNE
February 2011
EUROPÄISCHE NORM
ICS 33.180.20
English version
Connector sets and interconnect components to be used in optical fibre
communication systems -
Product specifications -
Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2
category A1a multimode fibre for 50/125 micron multimode fibre

Jeux de connecteurs et composants Steckverbindersätze und
d’interconnexion à utiliser dans les Verbindungsbauelemente für
systèmes de communication par fibres Lichtwellenleiter-
optiques – Spécifications de produits - Datenübertragungssysteme –
Partie 15-1: Type MPO équipé de férules Produktnormen – Teil 15 1: Bauart MPO
PPS 12 fibres, raccordé sur fibres mit PPS-Ferrulen mit 12 Fasern zum
multimodales de catégorie A1a de la CEI Anschluss an Mehrmodenfasern der
60793-2 pour fibres multimodales de Kategorie A1a nach IEC 60793 2 für
50/125 microns 50/125 µm-Mehrmodenfasern

This European Standard was approved by CENELEC on 2011-01-03. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50377-15-1:2011 E
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic
interconnect, passive and connectorised components.
The text of the draft was submitted to the formal vote and was accepted by CENELEC as EN 50377-15-1 on
2011-01-03.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.
The following dates were fixed:
– latest date by which the EN has to be implemented

at national level by publication of an identical

national standard or by endorsement
(dop) 2012-01-03
– latest date by which the national standards conflicting

with the EN have to be withdrawn
(dow) 2014-01-03
__________
– 3 – EN 50377-15-1:2011
CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE
COMMUNICATION SYSTEMS – PRODUCT SPECIFICATIONS
Part 15-1: Type MPO with 12 fibre PPS ferrules terminated on IEC 60793-2 category
A1a multimode fibre for 50/125 micron multimode fibre
Description Performance
Coupling mechanism: push-pull Application: Indoor applications (test
severities derived from
IEC category C)
Configuration: plug/adaptor/plug Attenuation grades: Max. ≤ 0,75 dB
(random mated)
95 % < 0,5 dB
Fibre category: EN 60793-2, type A1a
Mean ≤ 0,35 dB
Cable type: see Table 2 Return loss grades:
R: ≥ 20 dB
Related documents:
EN 50173 series, Information technology – Generic cabling systems
EN 60793-2, Optical fibres – Part 2: Product specifications – General (IEC 60793-2)
EN 60794-2, Optical fibre cables – Part 2: Indoor cables – Sectional specification (IEC 60794-2)
EN 60794-2-30, Optical fibre cables – Part 2-30: Indoor cables – Family specification for ribbon cables
(IEC 60794-2-30)
EN 61300 series, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures (IEC 61300 series)
EN 61753-1, Fibre optic interconnecting devices and passive components performance standard – Part 1:
General and guidance for performance standards (IEC 61753-1)
EN 61754-7, Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces –
Part 7: Type MPO connector family (IEC 61754-7)
ISO/IEC 11801, Information technology – Generic cabling for customer premises
Maximum outline dimensions:
REV
Contents
Foreword . 2
1 Scope . 6
1.1 Product definition . 6
1.2 Intermateability . 6
1.3 Operating environment . 6
1.4 Reliability . 6
1.5 Quality assurance . 6
2 Normative references . 6
3 Introduction . 8
3.1 Des c r iption . 8
3.2 Plug . 8
3.3 Adapter . 8
3.4 Materials . 8
3.5 Dimensions . 8
3.6 Colour and marking . 8
4 Variants . 9
4.1 Terminated plug . 9
4.2 Adapter . 9
4.3 Identification of variants . 9
5 Dimensional requirements . 10
5.1 Outline dimensions . 10
5.2 Mating face and other limit dimensions . 13
6 Tests. 22
6.1 Sample size . 22
6.2 Test and measurement methods . 22
6.3 Test sequence . 22
6.4 Pass/fail criteria . 22
7 Test report . 22
8 Product qualification requirements . 22
8.1 Dimensional and marking requirements . 22
8.2 Optical performance requirements . 23
8.3 Mechanical performance requirements . 24
8.4 Environmental performance requirements . 27
Annex A (normative) Sample size and product sourcing requirements . 29
Annex B (informative) Reference connector details . 30
B.1 Reference plug . 30
B.2 Test details . 31
Annex C (normative) Requirements for launch condition (Encircled flux) . 32
Bibliography . 33

– 5 – EN 50377-15-1:2011
Figures
Figure 1 – Outline dimensions – Plug C01F / C02F . 10
Figure 2 – Outline dimensions – Plug C01M / C02M . 10
Figure 3 – Outline dimensions – Plug C03F . 11
Figure 4 – Outline dimensions – Plug C03M . 11
Figure 5 – Outline dimensions – Adapter D01 . 12
Figure 6 – Dimensions – Plug . 13
Figure 7 – Optical datum target location diagram . 15
Figure 8 – Gauge pin . 15
Figure 9 – Plug gauge . 16
Figure 10 – Fibre core lateral location . 17
Figure 11 – Alignment pin . 17
Figure 12 – End face parameters related to attenuation . 18
Figure 13 – End face parameters related to physical contact . 19
Figure 14 – Dimensions – Adapter . 21
Figure B.1 – End face parameters of reference connector . 30

Tables
Table 1 – Preferred colour scheme . 9
Table 2 – Plug variants . 9
Table 3 – Adapter variants . 9
Table 4 – Identification of plug variants . 9
Table 5 – Identification of adapter variants . 10
Table 6 – Optical performance requirements .
...