SIST EN 61753-062-6:2008

Fibre optic interconnecting devices and passive components performance standard -- Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test

This part of IEC 61753 contains the minimum test and measurement requirements and severities which a fibre optic isolator must satisfy in order to be categorized as meeting the requirements of isolator devices used in outside plant environments. The requirements cover non-connectorized single-mode fibre optic pigtailed isolators for category O used in an uncontrolled environment and a sequential test.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten -- Teil 062-6: Nicht mit Steckern versehene Einmoden-LWL-Isolatoren f�r die Kategorie O - Freiluftanlagen und Pr�ffolge

Norme de qualit� de fonctionnement des dispositifs d'interconnexion et composants passifs � fibres optiques -- Partie 062-6: Isolateurs � fibres optiques monomodales � fibre amorce non connectoris�s pour la cat�gorie O - Environnement non contr�l� et essai s�quentiel

La présente partie de la CEI 61753 contient les sévérités et les exigences minimales d'essai et de mesure auxquelles un isolateur à fibres optiques doit satisfaire afin d'être classé comme conforme aux exigences des dispositifs d'isolateurs utilisés pour les installations dans un environnement extérieur. Les exigences couvrent les isolateurs à fibres optiques monomodales à fibre amorce non connectorisés pour la catégorie O, destinés à un environnement non contrôlé et à des essais séquentiels.

Standard lastnosti naprav za medsebojno povezovanje optičnih vlaken in pasivne komponente - 062-6. del: Nespojeni enorodni optični spojitveni izolatorji za kategorijo O - Zunanje okoljsko in sekvenčno preskušanje (IEC 61753-062-6:2007)

General Information

• Status: Published
• Publication Date: 10-Feb-2008
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 25-Jan-2008
• Due Date: 31-Mar-2008
• Completion Date: 11-Feb-2008
• Ref Project: EN 61753-062-6:2008 - Fibre optic interconnecting devices and passive components performance standard - Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-062-6:2008
01-marec-2008
6WDQGDUGODVWQRVWLQDSUDY]DPHGVHERMQRSRYH]RYDQMHRSWLþQLKYODNHQLQSDVLYQH
NRPSRQHQWHGHO1HVSRMHQLHQRURGQLRSWLþQLVSRMLWYHQLL]RODWRUML]D
NDWHJRULMR2=XQDQMHRNROMVNRLQVHNYHQþQRSUHVNXãDQMH,(&
Fibre optic interconnecting devices and passive components performance standard -
Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O -
Outside plant environment and sequential test (IEC 61753-062-6:2007)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
062-6: Nicht mit Steckern versehene Einmoden-LWL-Isolatoren für die Kategorie O -
Freiluftanlagen und Prüffolge (IEC 61753-062-6:2007)
Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants
passifs à fibres optiques - Partie 062-6: Isolateurs à fibres optiques monomodales à fibre
amorce non connectorisés pour la catégorie O - Environnement non contrôlé et essai
séquentiel (CEI 61753-062-6:2007)
Ta slovenski standard je istoveten z: EN 61753-062-6:2008
ICS:
33.180.20
SIST EN 61753-062-6:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61753-062-6

NORME EUROPÉENNE
January 2008
EUROPÄISCHE NORM

ICS 33.180.20


English version


Fibre optic interconnecting devices and passive components
performance standard -
Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators
for category O -
Uncontrolled environment and sequential test
(IEC 61753-062-6:2007)

Norme de qualité de fonctionnement  Lichtwellenleiter -
des dispositifs d'interconnexion Verbindungselemente
et composants passifs à fibres optiques - und passive Bauteile -
Partie 062-6: Isolateurs à fibres optiques Betriebsverhalten -
monomodales à fibre amorce
Teil 062-6: Nicht mit Steckern versehene
non connectorisés pour la catégorie O - Einmoden-LWL-Isolatoren
Environnement non contrôlé für die Kategorie O -
et essai séquentiel Freiluftanlagen und Prüffolge
(CEI 61753-062-6:2007) (IEC 61753-062-6:2007)


This European Standard was approved by CENELEC on 2007-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-062-6:2008 E

---------------------- Page: 2 ----------------------

EN 61753-062-6:2008 – 2 –
Foreword
The text of document 86B/2529/FDIS, future edition 1 of IEC 61753-062-6, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-062-6 on 2007-12-01.
The following dates were fixed:

– latest date by which the EN has to be implemented

at national level by publication of an identical
(dop) 2008-09-01
national standard or by endorsement

– latest date by which the national standards conflicting
(dow) 2010-12-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Notice
This document contains material that is Copyright © 2006, Telcordia Technologies, Inc. ("Telcordia").
All rights reserved.
The reader is advised that this IEC document and Telcordia source(s) may differ, and the context and use
of said material in this IEC document may differ from that of Telcordia. Telcordia makes no representation
or warranty, express or implied, with respect to the sufficiency, accuracy, or utility of any information or
opinion contained herein. Any use of or reliance upon said information or opinion is at the risk of the user.
Telcordia shall not be liable for any damage or injury incurred by any person arising out of the sufficiency,
accuracy, or utility of any information or opinion contained herein.
__________
Endorsement notice
The text of the International Standard IEC 61753-062-6:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61753-021-6 NOTE Harmonized as EN 61753-021-6:2008 (not modified).
__________

---------------------- Page: 3 ----------------------

– 3 – EN 61753-062-6:2008

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year
1) 2)
IEC 60793-1-1 – Optical fibres - EN 60793-1-1 2003
Part 1-1: Measurement methods and test
procedures - General and guidance


1) 2)
IEC 61300-2-1 – Fibre optic interconnecting devices and EN 61300-2-1 2003
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)


1) 2)
IEC 61300-2-4 – Fibre optic interconnecting devices and EN 61300-2-4 1997
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention


1) 2)
IEC 61300-2-5 – Fibre optic interconnecting devices and EN 61300-2-5 2002
passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion/twist


1) 2)
IEC 61300-2-9 – Fibre optic interconnecting devices and EN 61300-2-9 1997
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock


1) 2)
IEC 61300-2-14 – Fibre optic interconnecting devices and EN 61300-2-14 2006
passive components - Basic test and + corr. November 2006
measurement procedures -
Part 2-14: Tests - Optical power handling and
damage threshold characterization


1) 2)
IEC 61300-2-19 – Fibre optic interconnecting devices and EN 61300-2-19 2005
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)



1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

EN 61753-062-6:2008 – 4 –
Publication Year Title EN/HD Year
1) 2)
IEC 61300-2-22 – Fibre optic interconnecting devices and EN 61300-2-22 2007
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature


1) 2)
IEC 61300-2-42 – Fibre optic interconnecting devices and EN 61300-2-42 2005
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors


1) 2)
IEC 61300-2-44 – Fibre optic interconnecting devices and EN 61300-2-44 2005
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices


1) 2)
IEC 61300-2-48 – Fibre optic interconnecting devices and EN 61300-2-48 2003
passive components - Basic test and
measurement procedures -
Part 2-48: Tests - Temperature-humidity
cycling


1) 2)
IEC 61300-3-2 – Fibre optic interconnecting devices and EN 61300-3-2 1999
passive components - Basic tests and
measurement procedures -
Part 3-2: Examinations and measurements -
Polarization dependence of attenuation in a
single-mode fibre optic device


1) 2)
IEC 61300-3-7 – Fibre optic interconnecting devices and EN 61300-3-7 2001
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss


1) 2)
IEC 61300-3-32 – Fibre optic interconnecting devices and EN 61300-3-32 2006
passive components - Basic test and
measurement procedures -
Part 3-32: Examinations and measurements -
Polarisation mode dispersion measurement
for passive optical components

---------------------- Page: 5 ----------------------

INTERNATIONAL IEC
STANDARD
CEI



61753-062-6
NORME


First edition
INTERNATIONALE

Première édition
2007-07


Fibre optic interconnecting devices and passive
components performance standard –
Part 062-6:
Non-connectorized single-mode fibre
optic pigtailed isolators for category O –
Uncontrolled environment and sequential test

Norme de qualité de fonctionnement des
dispositifs d’interconnexion et composants
passifs à fibres optiques –
Partie 062-6:
Isolateurs à fibres optiques monomodales à fibre
amorce non connectorisés pour la catégorie O –
Environnement non contrôlé et essai séquentiel
PRICE CODE
N
CODE PRIX
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
Pour prix, voir catalogue en vigueur

---------------------- Page: 6 ----------------------

– 2 – 61753-062-6 © IEC:2007
CONTENTS
FOREWORD.3

1 Scope.6
2 Normative references.6
3 Test.7
4 Test report.8
5 Performance requirements.8
5.1 Sample size, sequencing and grouping .8
5.2 Test details and requirements.8

Annex A (normative) Sequencing and grouping of tests .14

Bibliography .15

Table 1 – Single-mode spectral bands.8
Table 2 – Test details and requirements .9

---------------------- Page: 7 ----------------------

61753-062-6 © IEC:2007 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS PERFORMANCE STANDARD –

Part 062-6: Non-connectorized single-mode fibre optic
pigtailed isolators for category O –
Uncontrolled environment and sequential test


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment
declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-062-6 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/2529/FDIS 86B/2579/RVD

Full information on the voting for the approval of this standard can be found in the report on voting
indicated in the above table.

---------------------- Page: 8 ----------------------

– 4 – 61753-062-6 © IEC:2007
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61753 series, published under the general title Fibre optic
interconnecting devices and passive components performance standard, can be found on the IEC
website.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 9 ----------------------

61753-062-6 © IEC:2007 – 5 –
NOTICE
This document contains material that is Copyright © 2006, Telcordia Technologies, Inc.
("Telcordia"). All rights reserved.
The reader is advised that this IEC document and Telcordia source(s) may differ, and the context
and use of said material in this IEC document may differ from that of Telcordia. TELCORDIA
MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO
THE SUFFICIENCY, ACCURACY, OR UTILITY OF ANY INFORMATION OR OPINION
CONTAINED HEREIN. ANY USE OF OR RELIANCE UPON SAID INFORMATION OR OPINION
IS AT THE RISK OF THE USER. TELCORDIA SHALL NOT BE LIABLE FOR ANY DAMAGE OR
INJURY INCURRED BY ANY PERSON ARISING OUT OF THE SUFFICIENCY, ACCURACY, OR
UTILITY OF ANY INFORMATION OR OPINION CONTAINED HEREIN.

---------------------- Page: 10 ----------------------

– 6 – 61753-062-6 © IEC:2007
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS PERFORMANCE STANDARD –

Part 062-6: Non-connectorized single-mode fibre optic
pigtailed isolators for category O –
Uncontrolled environment an
...