SIST EN 2591-403:2019

Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration

This European Standard specifies a method of determining the ability of elements of connection to
withstand sinusoidal or random vibrations of specified severities. It will be used together with EN 2591-100. This test is based on EN 60068-2-6 and EN 60068-2-64.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 403: Sinus- und rauschförmige Schwingungen

Série Aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 403 : Vibrations sinusoïdales et aléatoires

Aeronavtika - Elementi električnih in optičnih povezav - Preskusne metode - 403. del: Sinusna in naključna nihanja

Ta evropski standard določa metodo za ugotavljanje odpornosti elementov povezave
na sinusoidna ali naključna nihanja določenih moči. Uporablja se skupaj s standardom EN 2591-100. Ta preskus temelji na standardih EN 60068-2-6 in EN 60068-2-64.

General Information

• Status: Published
• Publication Date: 12-Nov-2018
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 05-Nov-2018
• Due Date: 10-Jan-2019
• Completion Date: 13-Nov-2018
• Ref Project: EN 2591-403:2018 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration

Relations

• Revised: SIST EN 2591-403:2012 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
• Effective Date: 03-May-2017
• Replaces: SIST EN 2591-403:2012 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
• Effective Date: 31-Oct-2018
• Revises: oSIST prEN 2591-403:2023 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
• Effective Date: 18-Jan-2023
• Revises: oSIST prEN 2591-403:2023 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
• Effective Date: 19-Jan-2023
• Revised: oSIST prEN 2591-403:2023 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
• Effective Date: 12-Oct-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2591-403:2019
01-januar-2019
1DGRPHãþD
SIST EN 2591-403:2012
$HURQDYWLND(OHPHQWLHOHNWULþQLKLQRSWLþQLKSRYH]DY3UHVNXVQHPHWRGH
GHO6LQXVQDLQQDNOMXþQDQLKDQMD
Aerospace series - Elements of electrical and optical connection - Test methods - Part
403: Sinusoidal and random vibration
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren -
Teil 403: Sinus- und rauschförmige Schwingungen
Série Aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais -
Partie 403 : Vibrations sinusoïdales et aléatoires
Ta slovenski standard je istoveten z: EN 2591-403:2018
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 2591-403:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 2591-403:2019

---------------------- Page: 2 ----------------------

SIST EN 2591-403:2019


EN 2591-403
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2018
EUROPÄISCHE NORM
ICS 49.060; 49.090 Supersedes EN 2591-403:2012
English Version

Aerospace series - Elements of electrical and optical
connection - Test methods - Part 403: Sinusoidal and
random vibration
Série Aérospatiale - Organes de connexion électrique et Luft- und Raumfahrt - Elektrische und optische
optique - Méthodes d'essais - Partie 403 : Vibrations Verbindungselemente - Prüfverfahren - Teil 403:
sinusoïdales et aléatoires Sinus- und rauschförmige Schwingungen
This European Standard was approved by CEN on 11 September 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2591-403:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 2591-403:2019
EN 2591-403:2018 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of specimens . 5
5 Method A – Sinusoidal vibration . 5
6 Method B – Random vibration . 7
7 Method C – High vibration endurance . 11

2

---------------------- Page: 4 ----------------------

SIST EN 2591-403:2019
EN 2591-403:2018 (E)
European foreword
This document (EN 2591-403:2018) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 2591-403:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 2591-403:2019
EN 2591-403:2018 (E)
1 Scope
This European Standard specifies a method of determining the ability of elements of connection to
withstand sinusoidal or random vibrations of specified severities.
It will be used together with EN 2591-100.
This test is based on EN 60068-2-6 and EN 60068-2-64.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2591-100, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 100: General
EN 2591-101, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 101: Visual examination
EN 2591-201, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 201: Contact resistance – low level
EN 2591-202, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 202: Contact resistance at rated current
EN 2591-204, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 204: Discontinuity of contacts in the microsecond range
EN 2591-408, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 408: Mating and unmating forces
EN 60068-2-6, Environmental testing — Part 2-6: Tests — Test Fc: Vibration (sinusoidal)
EN 60068-2-64, Environmental testing — Part 2-64: Test methods — Test Fh: Vibration, broad-band
random (digital control) and guidance
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp

4

---------------------- Page: 6 ----------------------

SIST EN 2591-403:2019
EN 2591-403:2018 (E)
4 Preparation of specimens
4.1 Preparation
Specimens shall be prepared according to the technical specification.
4.2 Technical details – Technical specification
Unless specified in the techn
...