SIST EN 4640-003:2008

Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 003: Plug optical connector - Product standard

This standard specifies the characteristics of a plug optical connectors, rectangular, rack and panel, multicontact.

Luft- und Raumfahrt - Optischer Rechtecksteckverbinder, Gehäuse, Einschub, Steckverbinder, Multipin, Ferrulendurchmesser 1,25 mm, demontierbarer Zentrierhülsenhalter - Teil 003: Optischer stecker - Produktnorm

Série aérospatiale - Connecteurs, optiques, rectangulraies, à contacts mutiples, rackales, férule diamètre 1,25, équipés d'un porte sleeve démontable - Partie 003: Fiche de connecteur optique - Norme de produit

Aeronavtika - Konektorji, optični, pravokotni, s stojalom in ploščo, večkontaktni, s premerom kapice 1,25, s snemljivo centrirno pušo - 003. del: Vtič optičnega kontektorja - Standard za proizvod

General Information

• Status: Published
• Publication Date: 22-Jun-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 12-Jun-2008
• Due Date: 17-Aug-2008
• Completion Date: 23-Jun-2008
• Ref Project: EN 4640-003:2008 - Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 003: Plug optical connector - Product standard

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4640-003:2008
01-september-2008
$HURQDYWLND.RQHNWRUMLRSWLþQLSUDYRNRWQLVVWRMDORPLQSORãþRYHþNRQWDNWQLV
SUHPHURPNDSLFHVVQHPOMLYRFHQWULUQRSXãRGHO9WLþRSWLþQHJD
NRQWHNWRUMD6WDQGDUG]DSURL]YRG
Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25
diameter ferrule, with removable alignment sleeve holder - Part 003: Plug optical
connector - Product standard
Luft- und Raumfahrt - Optischer Rechtecksteckverbinder, Gehäuse, Einschub,
Steckverbinder, Multipin, Ferrulendurchmesser 1,25 mm, demontierbarer
Zentrierhülsenhalter - Teil 003: Optischer stecker - Produktnorm
Série aérospatiale - Connecteurs, optiques, rectangulraies, à contacts mutiples,
rackales, férule diamètre 1,25, équipés d'un porte sleeve démontable - Partie 003: Fiche
de connecteur optique - Norme de produit
Ta slovenski standard je istoveten z: EN 4640-003:2008
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 4640-003:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 4640-003
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 49.060

English Version
Aerospace series - Connectors, optical, rectangular, rack and
panel, multicontact, 1,25 diameter ferrule, with removable
alignment sleeve holder - Part 003: Plug optical connector -
Product standard
Série aérospatiale - Connecteurs, optiques, rectangulaires, Luft- und Raumfahrt - Optischer Rechtecksteckverbinder,
à contacts mutiples, rackables, ferrule diamètre 1,25, Gehäuse, Einschub, Steckverbinder, Multipin,
équipés d'un porte sleeve démontable - Partie 003: Fiche Ferrulendurchmesser 1,25 mm, demontierbarer
de connecteur optique - Norme de produit Zentrierhülsenhalter - Teil 003: Optischer stecker -
Produktnorm
This European Standard was approved by CEN on 14 March 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4640-003:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 4640-003:2008 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Required characteristics.4
5 Designation .5
6 Marking .
...