SIST EN 60974-10:2003

Arc welding equipment -- Part 10: Electromagnetic compatibility (EMC) requirements

Applicable to equipment for arc welding and allied processes, including power sources and ancillary equipment, for example wire feeders, liquid cooling systems and arc striking and stabilising devices. With regard to emissions, the objective of this standard is to specify a) test methods to be used in conjunction with CISPR 11 and its amendments 1 and 2 to determine electromagnetic emissions; b) relevant standards for harmonic current emission, voltage fluctuations and flicker. With regard to immunity,the objective of this standard is to define immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges.

Lichtbogenschweißeinrichtungen -- Teil 10: Elektromagnetische Verträglichkeit (EMV) Anforderungen

Matériel de soudage à l'arc -- Partie 10: Exigences relatives à la compatibilité électromagnétique (CEM)

S'applique aux matériels de soudage à l'arc et techniques connexes y compris les sources de courant de soudage et les équipements auxiliaires, tels que les dévidoirs, les groupes de refroidissement par liquide et les dispositifs d'amorçage et de stabilisation de l'arc. En ce qui concerne les emissions, l'objectif de cette norme est de définir a) les méthodes d'essai à utiliser conjointement avec la CISPR 11 et ses amendements 1 et 2, pour déterminer les émissions électromagnétiques; b) les normes correspondant aux émissions de courants harmoniques, aux fluctuations de tension et aux flickers. En ce qui concerne l'immunité, l'objectif de cette norme est de définir les exigences d'immunités nécessaires et les méthodes d'essai pour les perturbations continues ou transitoires, conduites et rayonnées, y compris les décharges électrostatiques

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2003
• Withdrawal Date: 13-Jun-2016
• ICS: 25.160.30 - Welding equipment
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 14-Jun-2016
• Due Date: 07-Jul-2016
• Completion Date: 14-Jun-2016
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 89/336/EEC - Electromagnetic compatibility (EMC)
• Ref Project: EN 60974-10:2003 - Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

Relations

• Official Journal Project Relation: SIST EN 60974-10:2008 - Arc welding equipment -- Part 10: Electromagnetic compatibility (EMC) requirements
• Effective Date: 09-Sep-2009
• Replaced By: SIST EN 60974-10:2008 - Arc welding equipment -- Part 10: Electromagnetic compatibility (EMC) requirements
• Effective Date: 29-Jan-2023
• Official Journal Project Relation: SIST EN 50199:1998 - Electromagnetic compatibility (EMC) - Product standard for arc welding equipment
• Effective Date: 09-Sep-2009
• Replaces: SIST EN 50199:1998 - Electromagnetic compatibility (EMC) - Product standard for arc welding equipment
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 50199:1998 - Electromagnetic compatibility (EMC) - Product standard for arc welding equipment
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60974-10:2003
01-oktober-2003
1DGRPHãþD
SIST EN 50199:1998
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC)
requirements
Arc welding equipment -- Part 10: Electromagnetic compatibility (EMC) requirements
Lichtbogenschweißeinrichtungen -- Teil 10: Elektromagnetische Verträglichkeit (EMV)
Anforderungen
Matériel de soudage à l'arc -- Partie 10: Exigences relatives à la compatibilité
électromagnétique (CEM)
Ta slovenski standard je istoveten z: EN 60974-10:2003
ICS:
25.160.30 Varilna oprema Welding equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 60974-10:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60974-10:2003

---------------------- Page: 2 ----------------------

SIST EN 60974-10:2003
EUROPEAN STANDARD EN 60974-10
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2003

ICS 25.160.30 Supersedes EN 50199:1995


English version


Arc welding equipment
Part 10: Electromagnetic compatibility (EMC) requirements
(IEC 60974-10:2002, modified)


Matériel de soudage à l'arc Lichtbogenschweißeinrichtungen
Partie 10: Exigences relatives Teil 10: Elektromagnetische
à la compatibilité électromagnétique Verträglichkeit (EMV) Anforderungen
(CEM) (IEC 60974-10:2002, modifiziert)
(CEI 60974-10:2002, modifiée)



This European Standard was approved by CENELEC on 2003-03-18. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60974-10:2003 E

---------------------- Page: 3 ----------------------

SIST EN 60974-10:2003
EN 60974-10:2003 - 2 -
Foreword
The text of document 26/237/FDIS, future edition 1 of IEC 60974-10, prepared by IEC TC 26, Electric
welding, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60974-10 on 2003-03-18.
A draft amendment, prepared by the Technical Committee CENELEC TC 26A, Electric arc welding
equipment, was submitted to the formal vote and was approved by CENELEC for inclusion into
EN 60974-10 on 2003-03-18.
This European Standard supersedes EN 50199:1995 + corrigendum January 1998.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-03-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annex A is informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60974-10:2002 was approved by CENELEC as a European
Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
6.2.2 Mains terminal disturbance voltage limits
Delete under “a)…” the wording “and IEC/TS 61000-3-4”.
Replace the note by the following:
NOTE IEC/TS 61000-3-4 may be used for guidance by the parties concerned with the installation of arc welding equipment in
a low voltage network.
7.4 Immunity levels
Table 1, row 2, column 3, replace the given number “3” by the number “10”, so it will be read as
10 V/m.
__________

-------------
...