Electrostatics -- Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms

This part of IEC 61340 describes the discharge current waveforms used to simulate human body model (HBM) electrostatic discharges (ESD) and the basic requirements for equipment used to develop and verify these waveforms. This standard covers HBM ESD waveforms for use in general test methods and for application to materials or objects, electronic components and other items for ESD withstand-test or performance-evaluation purposes. The specific application of these HBM ESD waveforms to non-powered semiconductor devices is covered in IEC 60749-26. The waveforms defined in this standard are not intended for use in the testing of powered electronic systems for electromagnetic compatibility (EMC), which is covered in IEC 61000-4- 2.

Elektrostatik - Teil 3-1: Verfahren zur Simulation elektrostatischer Effekte - Prüfpulsformen der elektrostatischen Entladung für das Human Body Model (HBM)

Électrostatique -- Partie 3-1: Méthodes pour la simulation des effets électrostatiques - Formes d'onde d'essai des décharges éléctrostatiques pour le modèle du corps humain (HBM)

La présente partie de la CEI 61340 décrit les formes d'onde de courant de décharge utilisées pour simuler les décharges électrostatiques (ESD - Electrostatic Discharges) du modèle du corps humain (HBM - Human Body Model) et les exigences de base pour les appareils utilisés pour développer et vérifier ces formes d'onde.  Cette norme couvre les formes d'onde ESD du HBM prévues pour une utilisation dans les méthodes d'essai générales et pour application aux matériaux ou objets, aux composants électroniques et autres éléments pour l'essai de résistance aux ESD ou en vue de l'évaluation de la performance. L'application spécifique de ces formes d'onde ESD du HBM aux dispositifs à semiconducteurs en non-alimentés est traitée dans la CEI 60749-26. Les formes d'onde définies dans la présente norme ne sont pas destinées à être utilisées dans les essais des systèmes électroniques alimentés pour l'essai de compatibilité électromagnétique (CEM), qui est traité dans la CEI 61000-4-2. Le changement majeur par rapport à l'édition précédente est qu'elle ne contient plus d'applications pour les dispositifs à semiconducteurs

Elektrostatika - 3-1. del: Metode za simulacijo elektrostatičnih učinkov - Model človeškega telesa (HBM) - Preskušanje sestavnih delov (IEC 61340-3-1:2006)

General Information

Status
Published
Publication Date
22-Nov-2007
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
25-Oct-2007
Due Date
30-Dec-2007
Completion Date
23-Nov-2007

Relations

Buy Standard

Standard
EN 61340-3-1:2008
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61340-3-1:2008
01-januar-2008
1DGRPHãþD
SIST EN 61340-3-1:2002
(OHNWURVWDWLNDGHO0HWRGH]DVLPXODFLMRHOHNWURVWDWLþQLKXþLQNRY0RGHO
þORYHãNHJDWHOHVD +%0 3UHVNXãDQMHVHVWDYQLKGHORY ,(&
Electrostatics -- Part 3-1: Methods for simulation of electrostatic effects - Human body
model (HBM) electrostatic discharge test waveforms
Elektrostatik - Teil 3-1: Verfahren zur Simulation elektrostatischer Effekte -
Prüfpulsformen der elektrostatischen Entladung für das Human Body Model (HBM)
Électrostatique -- Partie 3-1: Méthodes pour la simulation des effets électrostatiques -
Formes d'onde d'essai des décharges éléctrostatiques pour le modèle du corps humain
(HBM)
Ta slovenski standard je istoveten z: EN 61340-3-1:2007
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
SIST EN 61340-3-1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61340-3-1:2008

---------------------- Page: 2 ----------------------

SIST EN 61340-3-1:2008


EUROPEAN STANDARD
EN 61340-3-1

NORME EUROPÉENNE
July 2007
EUROPÄISCHE NORM

ICS 17.220.99; 29.020 Supersedes EN 61340-3-1:2002


English version


Electrostatics -
Part 3-1: Methods for simulation of electrostatic effects -
Human body model (HBM) electrostatic discharge test waveforms
(IEC 61340-3-1:2006)


Électrostatique -  Elektrostatik -
Partie 3-1: Méthodes pour la simulation Teil 3-1: Verfahren zur Simulation
des effets électrostatiques - elektrostatischer Effekte -
Formes d'onde d'essai Prüfwellenformen
des décharges éléctrostatiques der elektrostatischen Entladung
pour le modèle du corps humain (HBM) für das Human Body Model (HBM)
(CEI 61340-3-1:2006) (IEC 61340-3-1:2006)




This European Standard was approved by CENELEC on 2007-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61340-3-1:2007 E

---------------------- Page: 3 ----------------------

SIST EN 61340-3-1:2008
EN 61340-3-1:2007 - 2 -
Foreword
The text of document 101/236/FDIS, future edition 2 of IEC 61340-3-1, prepared by IEC TC 101,
Electrostatics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61340-3-1 on 2007-07-01.
This European Standard supersedes EN 61340-3-1:2002.
The major change of this document is that it no longer contains the application to semiconductor devices.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-07-01
__________
Endorsement notice
The text of the International Standard IEC 61340-3-1:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60749-26 NOTE  Harmonized as EN 60749-26:2006 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 61340-3-1:2008
NORME CEI
INTERNATIONALE
IEC



61340-3-1
INTERNATIONAL


Deuxième édition
STANDARD

Second edition

2006-12


Électrostatique –
Partie 3-1:
Méthodes pour la simulation
des effets électrostatiques –
Formes d’onde d’essai des décharges
électrostatiques pour le modèle du corps
humain (HBM)

Electrostatics –
Part 3-1:
Methods for simulation of electrostatic effects –
Human body model (HBM) electrostatic discharge
test waveforms
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
L
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST EN 61340-3-1:2008
61340-3-1 © IEC:2006 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ELECTROSTATICS –

Part 3-1: Methods for simulation of electrostatic effects –
Human body model (HBM) electrostatic discharge test waveforms


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61340-3-1 has been prepared by IEC technical committee 101:
Electrostatics.
This second edition cancels and replaces the first edition, published in 2002, and constitutes
a technical revision.
The major change of this document is that it no longer contains the application to
semiconductor devices.

---------------------- Page: 6 ----------------------

SIST EN 61340-3-1:2008
61340-3-1 © IEC:2006 – 5 –
It recognizes the direction of the IEC SMB (Standardization Management Board) in terms of
considering inputs from TC 47 documents with regard to ESD test methods. TC 101 has
revised this publication IEC 61340-3-1, concerning the human body model, in collaboration
with the JWG of TC 47/TC 101. IEC 61340-3-1 incorporates TC 47 input, based on the
corresponding IEC 60749-26 of TC 47.
The text of this standard is based on the following documents:
FDIS Report on voting
101/236/FDIS 101/238/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The list of all parts of the IEC 61340 series, under the general title Electrostatics, can be
found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.